Construction of Taluka Court building at Village Kwant Tal. Kwant Dist. Chhotaudepur (Providing Fire Line system)

No. Figures Amount

1 (A) Supply, installation, testing & commissioning of electric driven 1.00 Each 346904.40

Main Pump suitable for automatic operation consisting of the

following, Complete in all respects, as required (B) Horizontal type,

multistage, centrifugal split casing pump of cast iron body & bringe

impeller with stainless steel shaft, mechanical seal conforming to

IS:1520 (C) Suitable HP squirrel cage induction motor, TEFC,

synchronous speed 1500 RPM, suitable for operation for enclosure,

horizontal foot mounted type with Class - Finsulation, conforming to

IS:325 (D) M.S Fabricated common base plate, coupling guard,

foundation bolt etc. as required. (E) suitable cement concrete

foundation duly plastered with anti vibration pads. 1620 LPM, 70 Mtr

2 (A) Supply, installation, testing & commissioning of Electric driven 1.00 Each 107950.20

pressurization pump suitable for automatic operation and consisting

of following complete in all respects, as required : (Jockey Pump)

(B) Horizontal type, multistage, centrifugal pump of cast iron body

and brinze impeller with stainless steel shaft, mechanical seal

conforming to IS:1520. (C) Suitable HP squirell cage induction

motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz

AC supply with IP 55 class of protection for enclosure, horizontal

foot mounted type with Class-F insulation, conforming to IS: 325 (D)

M.S. fabricated common base plate, coupling guard, foundation

bolts etc. as required (E) Suitable cement concrete foundation duly

plastered and with anti vibration pads. 10.8 m3/hr, 88 mtr Head

3 (A) Supply, installation, testing & commissioning of Diesel Engine 1.00 Each 618831.53

driven main fire Pump suitable for automatic operation and

consisting of following complete in all respects, as required : (Diesel

driven pump) (B) Horizontal type, multistage, centrifugal pump of

cast iron body and bronze impeller with stainless steel shaft,

mechanical seal conforming to IS:1520 (C) Suitable HP, 1500 RPM

water cooled with radiator, diesel engine conforming to relevant IS

standard complete with auto starting mechanism, 12/24 volts

electric starting equipment, diesel tank, exhaust pipe extended upto

10 m outside pump house duly insulated with 50 mm thick glass

wool with 1.0 mm tick aluminium sheet cladding, residential silencer,

instruments and protection as per standard specification, stop

solenoid for auto stop in the event of fault with audio indications,

painted with post office red colour etc. as required (D) M.S

fabricated, common base plate, coupling guard, foundation bolts

etc. as required. (E) Suitable cement concrete foundation duly

plastered and with anti vibration pads.

1620 LPM, 70 Mtr Head

It. Rate in Total

Description of Item Qty. Unit

No. Figures Amount

4 Fabrication, supply, Installation testing & commissioning of Electrical 1.00 Set 256783.14

control panel of cubical construction, floor mounted type, fabricated

out of 2mm thick CRCA sheet, compartmentalised with hinged

lockable doors, dust and vermin proof, powder coated of approved

shade after 7 tank treatments process, cable alley, inter-connection

with suitable size copper conductor cable/solid copper strip, having

switchgears and accessories, mountings and internal wiring, earth

terminals, numbering etc. complete in all respect, suitable for main

fire pump, pressurisation pump & diesel pump set complete as per

CPWD specification with following in coming and outgoings, suitable

for operation on 415 volts, 3 phase, 50 Hz AC supply with enclosure

protection class IP 42 as required.

1. Main Pump LPM 2280, 88 mtr Head, 2. Jockey Pump 10.8 m3/hr,

88 mtr Head, 3 Diesel Driven Pump 2280, 88 mtr Head

5 Cutting hole by mechnical means of 25 to 50 mm dia (or more as 26.00 Each 1161.50

per site situation) in slab/beam through out the thickness including

finishing the same with cement mortar 1:3 as directed by engineer in

6 Providing, laying, testing & commissioning of 'B' class medium G.I.

pipe conforming to IS 1239 including welding, fittings like elbows,

tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on

the wall/ceiling with suitable clamp/support frame and painting with

two or more coats of synthetic enamel paint of required shade

complete as required

150mm 200.00 Rmt 2034.85

100mm 200.00 Rmt 1471.79

80mm 30.00 Rmt 1144.07

7 Supplying and fixing single headed internal hydrant valve with 12.00 Each 5260.33

instantaneous Gun metal / Stainless steel coupling of 63 mm dia

with cast iron wheel ISI marked conforming to IS: 5290 (Type-A)

with blank gun metal / stainless steel cap and chain as required.

8 Supply and fixing 63 mm dia. 15 mtr long RRL Hose pipe with 63 12.00 Each 3355.87

mm dia. Male and female couplings duly bound with G.I wire, revets

etc. conforming to IS: 636 (Type-A) as required (Stainless Steel

Grade 304)

9 Supply & fixing 63 mm dia. Gun metal / Stainless Steel short branch 12.00 Each 1224.04

pipe with 20 mm nominal internal diameter size nozzle conforming

to IS:903 suiteble for instantaneous connection to interconnect hose

pipe coupling as required (Stainless Steel Grade 304)

10 Supply, Installing, Testing & Commissioning of M.S. 18 guage hose 12.00 Each 4500.44

box to accommodate of 1 Nos 15 mtrs. length hose box pipe &

No. of branch pipe with nozzle, with necessary fabrication support

and joints and 3 mm glass shutter including powder coating etc.

complete as directed by engineer in charge.

11 Supply and fixing of Fire Brigade connection of cast iron body with 1.00 Each 11974.48

gun metal/stainless steel male instantaneous inlet coupling with cap

and chain as required. For suitable dia. M.S/G.I. pipe connection

conforming to IS: 904 as required

It. Rate in Total

Description of Item Qty. Unit

No. Figures Amount

12 Supplying and fixing first-aid Hose Reel with MS construction spray 12.00 Each 7433.92

painted in post office red, conforming to IS 884 complete with the

following as required. (A) 20/25 mm nominal internal dia water hose

thermoplastic (Textile reinforced) type-2 as per IS:12585 (B) 20/25

mm nominal internal dia GM/SS globe valve & nozzle. (C) Drum and

brackets for fixing the equipmets on wall. (D) Connections from riser

with 25 mm dia stop gun metal valve / SS Ball Valve & M.S. / G.I.

pipe and socket. 30 m length.

13 Supplying, fixing, testing and commissioning of butterfly valve of PN 4.00 Each 7677.41

1.6 rating with bronze/gunmetal seat duly ISI marked complete with

nuts, bolts, washers, flanges, gaskets conforming to IS:13095 of

following sizes as required. 150 mm dia.

100mm dia. 6.00 Each 5713.12

80mm dia. 2.00 Each 4269.18

14 Providing, installation, testing and commissioning of non- return 3.00 Each 15240.54

valve of following sizes confirming to IS:5312 complete with rubber

gasket, G.I. bolts, nuts, washers etc.as required. 150 mm dia

100mm dia. 4.00 Each 9468.69

80mm dia. 2.00 Each 6590.82

15 Providing and fixing in position the Industrial type pressure gauges 7.00 Each 1168.80

with gun metal / brass valves complete as required

16 Providing & fixing of pressure switch in M.S/G.I pipe line including 3.00 Each 1324.29

connection etc. as required

17 Supply and fixing air vessel made of 250 mm dia, 8 mm thick M.S 1.00 Each 15633.10

sheet, 1200 mm in height with air release valve on top and flanged

connection to riser, drain arrangement with 25 mm dia gun metal

wheel valve with required accessories, pressure gauge and painting

with synthetic enamel paint of approvel shade as required

18 Design, Supply & Installation of Safety Signage approved make 13600.00 Sq.cm. 4.29

made of zinc sulphide based glow in the dark rigid sheet with high

luminous property enclosed in a transparent weather proof U/V

stabilized plastic pasted on 3mm thick clear acrylic sheet such as

EXIT, EMERGENCY EXIT, DO NOT USE LIFT IN CASE OF FIRE,

FLOOR MARKINGS, FIRE LIFT, STAIRCASE EXIT, FIRE ALARM

CALL POINT, FIRE EXTINGUISHER etc. completed as directed by

engineer in charge.

19 Structural steel work riveted, bolted or welded in built up section, 400.00 Kg. 113.12

trusses and framed work, hanging supports, wall supports including

cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer all complete.

It. Rate in Total

Description of Item Qty. Unit

No. Figures Amount

20 Labour charges for engaging skilled labour & skilled supervisor for 2.00 Job 90900.00

testing of all fire system on site with operating pump/panel & existing

FA system in consulation with nominated fire consultant. The testing

should be done in the presence of PWD authority with required

pressure of 3.5 Kg. at farthest point. Also testing should be done at

every floor with all installed equipment before final testing. All the

required documents pertaining to final NOC will be prepared by

contractor except fire drawing will be given by the client / authority.

The rate is not including for the installed equipment which required

to change at the time of testing and will be paid separately. Also the

required levies for final testing will be born by PWD / authority.

21 Supplying, Installation, testing and commissioning of micro 1.00 Each 249985.80

processor based intelligent addressable main fire alarm panel,

central processing unit with the following loop modules and capable

of supporting not less than 240 devices (including detectors) and

minimum120 detector per loop length up to 2 km, network

communication card, minimum 320 character graphics / LCD

display with touch screen or other keypad and minimum

events history log in the non volatile memory (EPROM) power

supply unit (230 +/- 5% V, 50hz), 48 hrs backup with 24 volt sealed

maintenance free batteries with automatic charger. The panel shall

have facility to connect printer to printout log and facility to have

seamless integration with analog / digital voice evacuation system

shall be complete with all accessories the panel shall be compatible

for IBMS system with open protocol BAC net /Modbus over IP

complete as per specification. (Two Loop Panel)

22 Supplying, installation, testing & commissioning of addressable 10.00 Each 4045.53

manual call point complete as required.

23 Supply, Installation, Testing & commissioning of addressable horn 10.00 Each 3664.16

cum strobe complete as required.

24 Supplying, installation, testing & commissioning of intelligent analog 129.00 Each 3412.72

addressable photo thermal smoke detector with mounting base

complete as required

25 Supplying & laying of 2 x 1.5 sq.mm fire Alarm armoured cable 1040.00 Rmt 147.92

600/1000 V rated with annealed copper conductor having XLPE

insulation, steel wire armouring & FRLS outer sheath complete as

26 Providing and erecting XLPE (IS:7098) (i)-88 ISI armoured cable 160.00 Rmt 1262.50

multistrand / Aluminium conductor for 1.1 KV to be laid on wall with

necessary clamps or in existing trench / pipe of following size of

cables. (a) 4 core 95 Sq.mm.

TOTAL Rs.

i.e. Rs. Thirty Nine lacs Seventy Six thousand Two hundred Thirty Two and Seventy Four paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

It. Rate in Total

Description of Item Qty. Unit

No. Figures Amount

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ______________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by

me and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Chhotaudepur (R & B) Sub Division, Chhotaudepur (R & B) Division, Chhotaudepur (R & B) Division,

Chhotaudepur Chhotaudepur Chhotaudepur