Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
3 Aug 2026, 11:00 am2d left
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
RJT DIV.
1 condition
We engage to supply the Western Railway with the articles specified above upon the terms of the Indian Railway Standard Conditions of Contract (latest revision) and upon the terms of the Revised Special Conditions and Instructions for the Guidance of the Contracts issued by the Western Railway S/137/F Revised May 2011 Amendment No. 12 of August 2018
34 conditions
The Vendors are advised to fill "Compliance to special tender condition / Checklist" with each offer by specifically stating "yes" or "No" against each special condition / Checklist and in case of a "No" must fill reason for not agreeing with that special condition / Checklist in the remark entry box as provided therein.
MARKING : Manufacturer to mark his name and date of manufacture as per drawing, wherever indicted, or at a location where it may not get obliterated in service on the item being supplied by them against the purchase order. Supplies received without this are liable to be rejected by consignee
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer are required to mention HSN Code of the offered goods and to quote correct applicable rate of GST. Tenderer will be solely responsible for correctness of the HSN code and the rate of GST for the offered goods
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across Gujarat · 45 Numbers total
Mirrors / cloth drying stand /Almirah
87265733
87265733
Limited - Indigenous
Goods
Rajkot, Gujarat
₹0
Exempted
27 Jul 2026
27 Jul 2026
3 items · 45 Numbers total
cloth drying stand. Structural Material & Sheet ThicknessStainless Steel Grade: The entire frame, drying rods, brackets, and joints must be constructed exclusively from AISI 304 Grade Stainless Steel. It must be completely non-magnetic, highly corrosion-r esistant, and rust-proof even when exposed to wet clothes, salty coastal air, or high humidity. Bidders must provide a material test cer tificate upon request.Main Load-Bearing Frame: Fabricated from heavy-duty round or square SS 304 tubes with a minimum external di ameter/profile of 25 mm to 32mm and a wall thickness of 16 Gauge (1.6mm ) to prevent structural bending or wobbling under full loa d.Drying Rods/Pipes: Fabricated from solid or hollow SS 304 tubes with a minimum outer diameter of 9.5 mm to 12.mm and a wall thic kness of 18 Gauge (1.2 mm) to resist sagging when heavy wet fabrics (like jeans, blankets, or towels) are hung.3. Welding, Joints, & Lo ad CapacityFabrication Quality: All permanent structural joints must be flawlessly TIG/Argon welded, ground down smoothly, and finish ed to a uniform premium mirror or satin polish. No sharp metal edges, burrs, or weld discoloration are permitted to ensure clothes do not catch or tear.Folding Mechanism/Rivets: All moving hinge joints, pins, and locking brackets must also be made of heavy-duty SS 3 04 or industrial-grade Nylon-6 (no cheap recycled plastics). They must be securely riveted to ensure smooth folding/unfolding actions over thousands of cycles.Load Rating: The fully extended stand must be capable of uniformly supporting a minimum wet clothes load of 30-40kg simultaneously without structural deflection, tipping, or collapsing.4. Mobility & Stability AccessoriesCaster Wheels (Option al/As required): Equipped with a minimum of four (4) heavy-duty, 360 swiveling, smooth-rolling caster wheels for easy mobility.Wheel Material: Made of non-marking Polyurethane (PU) or Nylon to prevent scratching premium indoor flooring.Braking: At least two (2) whe els must feature secure foot-operated locking brakes to hold the stand firmly in position on balconies or terraces during high winds.Flo or Protectors: If wheels are not opted for, the base legs must be fitted with heavy-duty, press-fitted, anti-skid Nylon/PVC end caps to pr event slipping and safeguard floors. [ Warranty Period: 24 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DIVISIONAL SECURITY COMMISSIONER RAJKOT, WR | Gujarat | 6.00 Numbers |
| Total | 6 Numbers | |
Steel Almirah size 48"x36"x16", with three shelf, 20 gauge. 1.Material & Sheet Thickness (20 Gauge Standard)Main Fra me & Carcass Structure: Fabricated entirely from premium-grade Cold Rolled Close Annealed (CRCA) Steel conforming to IS: 513.,Shee t Thickness (Sheet Gauge): * Body, Sides, Top, Bottom & Back Panels: Minimum 20 Gauge (0.91 mm) thick CRCA steel sheet.,Door Shu tters: Minimum 20 Gauge (0.91 mm) thick CRCA steel sheet, reinforced with full-length vertical stiffeners welded on the inner side to p revent flexing or buckling. ,Internal Shelves: Minimum 20 Gauge (0.91 mm) thick CRCA steel sheet, uniquely roll-formed or bent with a multi-fold profile at the front and back to enhance load-bearing capacity.,Internal Shelving & Load Capacity Shelves Type: Adjustable/ Movable type supported on heavy-duty, multi-slotted inner strips, or fixed rigid type securely welded/bolted to the carcass (as per site requirement). Load Rating: Each shelf must be capable of uniformly supporting a minimum load of 40?50 kg without showing signs of permanent deformation or sagging. 3. Locking Mechanism & Hardware Locking System: Premium Three-way bolting mechanism (top, bottom, and side latching) operated by a robust handle. Lock Type: High-security unpickable dual-control or 6-lever mechanical lock, s upplied with a minimum of two (2) stainless steel or brass keys. Hinges: Heavy-duty, concealed or semi-concealed friction-free steel hi nges welded or securely bolted to the frame to ensure smooth door movement and prevent alignment drop over extended use. Handle : Ergonomic, chrome-plated or zinc-alloy die-cast handle with integrated lock housing. 4. Anti-Corrosion Treatment & Surface Finish Pr e-treatment Process: The complete steel structure must undergo a rigorous 7-tank anti-corrosion chemical pre-treatment process (co mprising degreasing, derusting, phosphating, and passivation) to shield the metal from humidity and rusting. Final Paint Coating: Elect rostatically sprayed with premium Epoxy Polyester Powder Coating to a minimum dry film thickness (DFT) of 45 to 60 microns. Baking: Oven-baked at approximately 180?C to 200?C to achieve a scratch-resistant, hard, and uniform matte/texture finish. Color: Standard in stitutional shades (such as Prince Grey, Olive Green, or DA Grey) to be finalized by the purchaser. Make : Godrej, Nilkamal, methodex or durian [ Warranty Period: 60 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DIVISIONAL SECURITY COMMISSIONER RAJKOT, WR | Gujarat | 36.00 Numbers |
| Total | 36 Numbers | |
Mirrors Size 48 *24 9. Mirror, supply and installation on site in Dwk & SUNR. [ Warranty Period: 12 Months after the da te of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DIVISIONAL SECURITY COMMISSIONER RAJKOT, WR | Gujarat | 3.00 Numbers |
| Total | 3 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].