For Regarding work in Deposit Head

BOQ FORREGARDING WORK SHIFTING / DISPLACEMENT OF 33 KV, 11 KV, LT LINES, DTR AND SUB STATIONS UNDER ELECTRICITY DISTRIBUTIO DIVISION, SIDCUL, HARIDWAR UNDER DEPOSIT HEAD AGAINST E-TENDER NO- 50/EDC(H)/2026-27

Bidder's Name & Address

S.N. Work Unit Qty. Rate Amount (In Rs.)

A Decentrlized Material

1 Holding Clamp J-I hook for AB Cable NOS 1

2 Suspension Clamp I Hook NOS 1

3 Dead End Clamp with I Hook NOS 1

4 Shackle Insulator 100x115 mm with N&B NOS 1

5 Stay Insulator 65x90 mm NOS 1

6 Danger Board with Clamp N&B NOS 1

7 Piercing Connector for 120-95 mm2 NOS 1

8 Bolt & Nuts off size KG 1

9 LT AB Cable 3x50+1x35+1x16 Sq.mm MTR 1

10 LT Distribution Box 3 Phase NOS 1

11 Al. XLPE Cable 1x35 Sqmm for energizing DB Mtr 1

12 Cable Holding Clamp with N&B No. 1

13 Holding Clamp for SP-72 with N&B No. 1

14 Holding Clamp for SP-55 with N&B No. 1

15 Holding Clamp for SP-33 with N&B No. 1

16 Holding Clamp for PCC Pole with N&B No. 1

17 Earth wire Clamp for SP-72 with N&B No. 1

18 Earth wire Clamp for SP-55 with N&B No. 1

19 Earth wire Clamp for SP-33 with N&B No. 1

20 Earth wire Clamp for PCC Pole with N&B No. 1

21 Stay Clamp for SP-72 with N&B No. 1

22 Stay Clamp for SP-55 with N&B No. 1

23 Stay Clamp for SP-33 with N&B No. 1

24 Stay Clamp for PCC Pole with N&B No. 1

25 Bracing Clamp for SP-72 with N&B No. 1

26 Bracing Clamp for SP-55 with N&B No. 1

27 Bracing Clamp for SP-33 with N&B No. 1

28 Bracing Clamp for PCC Pole with N&B No. 1

29 X-ARM Clamp with N&B for ST Pole SP-72 No. 1

30 X-ARM Clamp with N&B for ST Pole SP-55 No. 1

31 X-ARM Clamp with N&B for ST Pole SP-33 No. 1

32 X-ARM Clamp with N&B for PCC Pole. No. 1

33 LT Clamp for SP-55 with N&B No. 1

34 LT Clamp for SP-33 with N&B No. 1

35 LT Clamp for PCC with N&B No. 1

36 11 KV Cable J/K 3x50 Sq.mm (O/D) No. 1

37 11 KV Cable J/K 3x50 Sq.mm (I/D) No. 1

38 11 KV Cable J/K 3x70 Sq.mm (O/D) No. 1

39 11 KV Cable J/K 3x70 Sq.mm (I/D) No. 1

40 F' Clamp with N&B No. 1

41 LT Insulator No. 1

42 LT PRC No. 1

43 PG Clamp Rabbit to Rabbit No. 1

44 PG Clamp Dog to Dog No. 1

45 G.I. Pipe 150 Sqmm Mtr 1

46 AL. Lugs 120 Sqmm No. 1

47 HT Fuse Set No. 1

48 LT Fuse Set No. 1

B LABOUR CHARGE

1 Cartage of following material from store centre, Haridwar/Rishikesh/ Roorkee /JE Store to work site with loading, unloading at both points and proper stacking. Dist. upto( 0-40) Km.

(ii) SP-33 No. 1

(iii) SP-55 No. 1

(iv) SP-72 No. 1

(v) PCC Pole No. 1

(vi) Line material Qtl. 1

(vii) 25 KVA T/F No. 1

(viii) 63 KVA T/F No. 1

(ix) 100 KVA T/F No. 1

(x) 250 KVA T/F No. 1

(xi) 400/500 KVA T/F No. 1

(xii) 11KV/33KV Metering Cubical(PRMC) No. 1

(xiii) 11KV/33KV VCB No. 1

(xiv) 11KV CT-PT combined unit off size No. 1

2 HEADLOAD CARTAGE SP-55 POLE (0-1 KM) NOS 1

3 HEADLOAD CARTAGE OF MATERIAL (0-1 KM) QTL 1

4 Manual shifting/Pulling of metering cubical from existing site to plinth/ nereby place with loading and unloading at both ends. Dist. upto( 0-1) Km No. 1

5 Manual shifting/Pulling of 11KV/33KV VCB from existing site to plinth/ nereby place with loading and unloading at both ends. Dist. upto(0-1) Km No. 1

6 Manual shifting/Pulling of 11KV CT-PT combined unit off size from existing site to plinth/nereby place with loading and unloading at both ends. Dist. upto(0-1) Km No. 1

7 Excavation of earth for pole pit of size 0.9x0.6x1/6th of full length of pole for erection of pole in all type of soil complete work. CuM 1

8 Erection of Single support pole in proper level and alignment alongwith fixing of all accessories, like top channel & clamps for HT/LT line as per Respo construction manual.

(ii) SP-33 No. 1

(iii) SP-55 No. 1

(iv) SP-72 No. 1

(v) PCC Pole No. 1

9 Erection of double support pole in proper level and alignment alongwith fixing of all accessories, like top channel x-bracing & clamps for HT/LT line as per Respo construction manual.

(ii) SP-33 No. 1

(iii) SP-55 No. 1

(iv) SP-72 No. 1

(v) PCC Pole No. 1

10 Erection of triple support structure in proper level and alignment alongwith fixing of all accessories, like top channel x-bracing & clamps for HT/LT line as per Respo construction manual.

(i) SP-55 No. 1

(ii) SP-72 No. 1

11 Erection of Four pole support structure in proper level and alignment alongwith fixing of all accessories, like top channel x-bracing & clamps for HT/LT line as per Respo construction manual.

(i) SP-55 No. 1

(ii) SP-72 No. 1

12 Grouting of pole in size 0.45x0.45x1/9th of the support in CC ratio 1:4:8 (1cement : 4 graded stone 20mm naminal size : 8 coarse sand) block including cost of cement, sand and stone ballast as per Respo construction manual. CuM 1

13 Muffing of Poles size 0.45x0.60 cm radius with cc 1:3:6 block and 45 cm height from ground level including cost of cement, stone and sand etc. No. 1

14 Fabrication of MS Channel/Angle Kg 1

15 Fixing of D-type bracket in LT line. No. 1

16 Fixing of triangular-type bracket in 11KV line. No. 1

17 Excavation of earth for Stay pit of size 0.6x0.6x1.2mtr in all type of soil as directed complete work. CuM 1

18 Fixing, Binding, Nozzling of stay on required tension as per RESPO manual.

(i) LT line. No. 1

(ii) 11KV line. No. 1

(iii) 33KV line. No. 1

19 Grouting of Stay in size 0.6x0.6x0.3mtr in CC ratio 1:4:8 (1cement : 4 graded stone 20mm naminal size : 8 coarse sand) block including cost of cement, sand and stone ballast as per Respo construction mannual. CuM 1

20 Erection of Earthing Rod and connecting the earth electrode with the help of GI wire. No. 1

21 LAYING & FIXING LT XLPE CALBE MTR 1

22 FIXING OF DEAD END CLAMP NOS 1

23 FIXING OF SUSPENSION CLAMP WITH I HOOK NOS 1

24 FIXING OF PIERCING CONNECTOR 120-95 SQMM NOS 1

25 SUPPLY & FIXING PRC L2L 95-95 NOS 1

26 Laying, Spreading, Stringing and sagging of 11KV/33KV line in 3 phase (3 Phase 4 wire) of the following wire as phase wire with G.I. earth wire complete with binding and jumpering as per RESPO Specn..

(i) ACSR Weasel Km. 1

(ii) ACSR Rabbit Km. 1

(iii) ACSR Raccoon Km. 1

(iv) ACSR Dog (11KV/33KV) Km. 1

(v) ACSR Panther (33KV) Km. 1

27 Laying, Spreading, Stringing and sagging of LT lines of the following wire as phase wire with G.I. earth wire complete with binding and jumpering as per RESPO Specn.

(A) ACSR Weasel Conductor

(i) 3 Phase 5 wire length Ckt. Km. 1

(ii) 3 Phase 4 wire length Ckt. Km. 1

(iii) 2 Phase 3 wire length Ckt. Km. 1

(iv) 1 Phase 2 wire length Ckt. Km. 1

(B) ACSR Rabbit Conductor

(i) 3 Phase 5 wire length Ckt. Km. 1

(ii) 3 Phase 4 wire length Ckt. Km. 1

(iii) 2 Phase 3 wire length Ckt. Km. 1

(iv) 1 Phase 2 wire length Ckt. Km. 1

(C) ACSR Raccoon Conductor

(i) 3 Phase 5 wire length Ckt. Km. 1

(ii) 3 Phase 4 wire length Ckt. Km. 1

(iii) 2 Phase 3 wire length Ckt. Km. 1

(iv) 1 Phase 2 wire length Ckt. Km. 1

(D) ACSR Dog Conductor

(i) 3 Phase 5 wire length Ckt. Km. 1

(ii) 3 Phase 4 wire length Ckt. Km. 1

(iii) 2 Phase 3 wire length Ckt. Km. 1

(iv) 1 Phase 2 wire length Ckt. Km. 1

28 LAYING OF LT XLPE ABC 3X120+1X95 +1X16 SQ. MTR 1

29 LAYING OF LT AB CABLE 3X50+1X35+1X16 SQMM MTR 1

30 Making Jumper on the double pole with PG Clamp complete as per RESPO Job 1

31 Guarding of 11KV line as per RESPO specn. (Length of span 40 mtr) including fabrication of guarding channel & angle & fixing on the pole & laying sagging GI 6 SWG wire in each and cross guard at a distance of 2 mtr in each span including binding. Span 1

32 Guarding of 33KV line as per RESPO specn. (Length of span 40 mtr) including fabrication of guarding channel & angle & fixing on the pole & laying sagging GI 6 SWG wire in each and cross guard at a distance of 2 mtr in each span including binding. Span 1

33 Painting of ST poles and fixture with scrapping of dust & rust applying one coat of primer Red oxide paint and two coats of synth enamel Al. paint top of pole office red synth. enamel paint upto x-arms & bottom of pole upto 1.5 mtr synth enamel black paint.

(i) ST Pole SP-23/21 No. 1

(ii) ST Pole SP-33 No. 1

(iii) ST Pole SP-55 No. 1

(iv) ST Pole SP-72 No. 1

34 Digging of trench of size 0.60x0.15x0.9 mtr and laying under ground LT cable complete in all respect. Mtr 1

35 Digging of trench of size 0.60x0.15x0.9 mtr and laying under ground 11KV cable complete in all respect. Mtr 1

36 Digging of trench of size 0.60x0.15x1.0 mtr and laying under ground 33KV cable complete in all respect. Mtr 1

37 Laying of 11 KV cable in 1.5 mtr. Depth with suibable trencheless technology with provding & fixing of HDPE pipe. Mtr 1

38 Laying of 33 KV cable in 1.5 mtr. Depth with suibable trencheless technology with provding & fixing of HDPE pipe. Mtr 1

39 Laying of overhead 11KV XLPE cable off size complete in all respect. Mtr 1

40 Fixing of GI pipe complete in all respect. Mtr 1

41 Laying of LT/11KV Cable in Half Circle Hume Pipe of dia 150mm including cost of hume pipe in depth 1.5 meter. Mtr 1

42 Laying of 33KV Cable in Half Circle Hume Pipe of dia 150mm including cost of hume pipe in depth 1.5 meter. Mtr 1

43 Filling & Fixing of 11KV Heat Shrinkable Cable Jointing Kit complete in all respect. No. 1

44 Filling & Fixing of 11 KV HS Straight through cable jointing Kit. No. 1

45 Filling & Fixing of 33KV Heat Shrinkable Cable Jointing Kit complete in all respect. No. 1

46 Filling & Fixing of 33 KV HS Straight through cable jointing Kit. No. 1

47 Installation of 11KV/33KV Metering cubical in the metering room with grouting complete in all respect. Job 1

48 Installation of 11KV VCB complete in all respect. Job 1

49 Installation of 33KV VCB complete in all respect. Job 1

50 Installation of 11KV CT-PT combined unit off size complete in all respect. Job 1

51 Earthing of 11KV/33KV Metering Cubical/VCB/11KV CT-PT combined unit off size with GI Strip 50x6mm complete in all respect. Job 1

52 Dismantling of following pole for HT/LT line & back carriage from site to JE store/ESC, Haridwar complete in all respect .

(ii) SP-33 No. 1

(iii) SP-55 No. 1

(iv) SP-72 No. 1

(v) PCC Pole No. 1

53 Dismantling of ACSR Conductor of HT/LT line & back carriage to JE store/ ESC, Haridwar.

(i) Weasel Km. 1

(ii) Rabbit Km. 1

(iii) Raccoon Km. 1

(v) AB Cable off size Km. 1

54 Dismantling of T/F's from double pole/plinth complete in all respect.

(i) 25KVA No. 1

(ii) 63KVA No. 1

(iii) 100KVA No. 1

(iv) 250KVA No. 1

(v) 400KVA No. 1

55 Safe carriage of dismantled T/F's from pit site to JE' store/ store center with loading & unloading at both ends.

(i) 25KVA No. 1

(ii) 63KVA No. 1

(iii) 100KVA No. 1

(iv) 250KVA No. 1

(v) 400KVA No. 1

56 Dismantling of 11KV/33KV VCB & back carriage to JE store/ store center with loading & unloading both ends. No. 1

57 Dismantling of Metering cubical & back carriage to JE store/ store center with loading & unloading both ends. No. 1

58 Dismantling of TPMO/Fuse Set on double pole structure. No. 1

59 Dismantling of LT Bracket. No. 1

60 Dismantling of HT Bracket. No. 1

61 Dismantling of 11KV/33KV Cable complete in all respect. Mtr 1

62 Dismantling of LT Consumer Service Cable. Job 1

63 Dismantling of HT/LT Jumper complete in all respect. No. 1

64 Dismantling of Section Pole complete in all respect. No. 1

65 Mounting & Fixing of TPMO/Fuse Set on double pole structure including making of connections complete. No. 1

66 Fixing & Installation of HT Fuse Set. No. 1

67 Fixing & Installation of LT Fuse Set. No. 1

68 Fixing of L.A. on the double pole & earthing of the same as per RESPO specn. Set 1

69 Laying of LT cable including crimping of lugs size of 1x35/70/95/120/150 Sqmm RMT 1

70 Laying of LT cable including crimping of lugs size of 1x240/400/630 Sqmm RMT 1

71 Construction of T/F plinth with size 2x2x1.1m above ground level and 0.6mtr below ground level including the cost of material such as cement, brick, ballast, sand etc. complete in all respect. No. 1

72 Mounting of Transformer on Plinth/double pole and making all connections of HT/LT complete in all respect.

(i) 25KVA No. 1

(ii) 63KVA No. 1

(iii) 100KVA No. 1

(iv) 250KVA No. 1

73 Lopping & Chopping of tree branches for HT/LT line. Per tree 1

74 T-off Conection Complete 11 KV/33KV line complete in all respect. No. 1

75 Erection, providing and fixing of wire mesh of size 50x35 mm around plinth and toe wall duly welded with frame of MS Angle iron 35x35x6mm and strip of size 35x6mm in mid of each side alongwith wire mesh (width of wiremesh 1.5 mtr)with the height of 0.5 mtr above the plinth and 2 mtr above the toe wall with 1 no. gate and locking arrangement in the toe wall size including grouting of 1no. legs in the ratio in block of size 0.25x0.25x0.45 mtr including gravelling of shingle of size 20 to 40mm and complete printing of wire mesh with aluminium paint with two coat(including cost of all material) RMT 1

76 Neutral Earthing of T/F by 1.5Mtr Delta Earthing including digging of pit 1.5x1.5x1 Mtr 3 no. 32 mm dia 3 mtr long MS round duly pointed at one and 500 mm below ground level jointing the neutral point of the T/F with the flat and earthing of T/F body of 2 points. No. 1

77 Making of section pole of existing HT/LT line complete in all respect. Job 1

78 Providing and fixing of Danger Board, nunber plate with clamp complete (lncluding cost of all material) No. 1

79 Replacement of 11KV CT inside the 11KV metering cubical complete in all respect. No. 1

80 Laying of LT Service Cable from pole to consumer end meter complete in all respect.. Job 1

81 Loading, unloading & carriage of LT PRMC from ESC store, Haridwar/ Roorkee/JE store to pit site & installation on the double pole and making to pass LT cable from T/F to PRMC. Job 1

82 Fixing of GI Pipe Mtr 1

83 Fixing of 3Ph. LT Distribution Box No. 1

84 Fixing of X-Bracing on double pole complete in all respect. Job 1

85 Fixing of RCC Cable route marker including cost of material. No. 1

86 Safe back carriage of dismantled/scrap material from work site to JE store/ESC, Haridwar complete in all respect. Qtl. 1

87 Earthing of L.A Job 1

Note :- GST will be paid extra as actuals.

Company/Firm Name