Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-AOC | ₹5.0 L | L1 | Accepted-AOC Lowest bid Accepted |
| 2 | L2₹5.2 LRejected-AOC | ₹5.2 L | L2 | Rejected-AOC Rejected |
| Sl No | Description | Qty | Unit | Am Construction L2 | R K BABU L1 |
|---|---|---|---|---|---|
| 1.00Installation of Pumpset and Electrictrification to Pumphouse | |||||
| 1.00 | OD33762/2025-2026:Supply, installation, testing, trial run and commissioning of centrifugal pumpset with efficiency not less than 50% capable of discharging 15 lps against total head of 45mtrs, with electric motor 25 HP suitable for handling fresh and silty water with maximum rpm 3000. The material of construction of the casing NICI and impeller shall be stainless steel CF8M with Chrome steel A276 type shaft. The prime mover for the pump should be 3 phase totally enclosed water cooled motor confirming to IS 9283, energy efficient standard rating suitable for 415V+/- 10%, 50Hz+/-5% connection with class F insulation, suitable cable confirming to IS 732:2019, length15m as per site conditions. Meter board with fuse as per KSEB specification and electrical inspectorate norms, prefabricated closed type control panel board completely wired and fitted with fully automatic star delta starter, main switch with ISI mark, Ammeter, volt meter, VSS, RYB indicating lamp, 6A MCB for RYB indication lamp, HRC fuse, neutral link, ELCB, suitable capacitor, SSP , 2 nos of earth fit suitable for motor as per KSEB specification and electrical inspectrate norms, with all necessary protection units and instrumentation. The rate inclusive of all the charges of supply, installation including petty civil works,including supporting structure bolting etc, trial run and commissioning .Suitable stainless steel rope for hanging the pump must also be provided. Above works shall be done as per the direction of departmental officer at site. | 1 | Sets | 25,000 ₹25,000 | 2,67,145 ₹2.7 L |
| 1.00 | OD33765/2025-2026:Supply and laying of M S pipes complete as per direction of site engineer in charge. External work 150 mm dia nominal bore | 40 | metre | 6,599 ₹2.6 L | 2,323 ₹92,920 |
| 1.00 | OD33767/2025-2026:Providing and fixing gun metal non-return valve of approved quality (screwed end):150 mm nominal boreHorizontal | 2 | each | 200 ₹400 | 14,518.75 ₹29,037.50 |
| 1.00 | OD33781/2025-2026:Providing and fixing 6 inch dia MS foot valve of approved quality | 1 | each | 2,500 ₹2,500 | 9,292 ₹9,292 |
| 1.00 | OD33780/2025-2026:Providing and fixing MS reducer 8inch to 6inch dia of approved quality | 4 | each | 5,000 ₹20,000 | 5,807.5 ₹23,230 |
| 1.01 | OD33774/2025-2026:Providing and fixing MS flange for 6 inch dia pipe | 36 | each | 5,000 ₹1.8 L | 1,103.43 ₹39,723.48 |
| 1.01 | OD33777/2025-2026:Providing and fixing MS elbow for 6 inch dia pipe | 8 | each | 200 ₹1,600 | 3,484.5 ₹27,876 |
| 1.01 | OD33783/2025-2026:Providing electrification to the pump house building including supply and installation of 4 Nos. LED bulbs (12W, 230V) with suitable holders, one modular switchboard comprising 4 Nos. one-way switches (6A), 1 No. 3-pin socket outlet (6A/16A) with controlling switch, wiring with ISI marked 1.5 sq.mm copper conductor FRLS PVC insulated wires for light points and 2.5 sq.mm copper conductor wires for plug point, drawn through ISI marked PVC conduit (minimum 20mm dia), open surface wiring on wall including all accessories, connections, earthing, testing and commissioning complete as per IS:732 and departmental standards under the supervision of a licensed wireman and also as per the directions of departmental engineer at site. | 1 | each | 25,000 ₹25,000 | 9,756.6 ₹9,756.60 |
Tender Value
₹5.0 L
EMD Value
₹12,475
Closing Date
14 Nov 2025, 5:00 pmClosed
Assistant Executive Engineer
o/o the Assistant Executive Engineer, MI Sub Division Kottayam
The project, the intake pipe and its related accessories, motor pump panel board and related accessories for a pump house, new pump house building and damaged pipe connections of carrying pipe from pump to tanks.
2025_Irrig_819631_1
IRR/IA/TR/1099/2024_5_2_1/1
Open Tender
Civil Works - Lift Irrigation Schemes
150 days
Kurichy
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,100
Yes
₹12,475
Yes
7 May 2026
6 Nov 2025
15 Nov 2025
6 Nov 2025
14 Nov 2025
6 Nov 2025
Amount
Installation of Pumpset and Electrictrification to Pumphouse
OD33762/2025-2026:Supply, installation, testing, trial run and commissioning of centrifugal pumpset with efficiency not less than 50% capable of discharging 15 lps against total head of 45mtrs, with electric motor 25 HP suitable for handling fresh and silty water with maximum rpm 3000. The material of construction of the casing NICI and impeller shall be stainless steel CF8M with Chrome steel A276 type shaft. The prime mover for the pump should be 3 phase totally enclosed water cooled motor confirming to IS 9283, energy efficient standard rating suitable for 415V+/- 10%, 50Hz+/-5% connection with class F insulation, suitable cable confirming to IS 732:2019, length15m as per site conditions. Meter board with fuse as per KSEB specification and electrical inspectorate norms, prefabricated closed type control panel board completely wired and fitted with fully automatic star delta starter, main switch with ISI mark, Ammeter, volt meter, VSS, RYB indicating lamp, 6A MCB for RYB indication lamp, HRC fuse, neutral link, ELCB, suitable capacitor, SSP , 2 nos of earth fit suitable for motor as per KSEB specification and electrical inspectrate norms, with all necessary protection units and instrumentation. The rate inclusive of all the charges of supply, installation including petty civil works,including supporting structure bolting etc, trial run and commissioning .Suitable stainless steel rope for hanging the pump must also be provided. Above works shall be done as per the direction of departmental officer at site.
OD33765/2025-2026:Supply and laying of M S pipes complete as per direction of site engineer in charge. External work 150 mm dia nominal bore
OD33767/2025-2026:Providing and fixing gun metal non-return valve of approved quality (screwed end):150 mm nominal boreHorizontal
OD33781/2025-2026:Providing and fixing 6 inch dia MS foot valve of approved quality
OD33780/2025-2026:Providing and fixing MS reducer 8inch to 6inch dia of approved quality
OD33774/2025-2026:Providing and fixing MS flange for 6 inch dia pipe
OD33777/2025-2026:Providing and fixing MS elbow for 6 inch dia pipe
OD33783/2025-2026:Providing electrification to the pump house building including supply and installation of 4 Nos. LED bulbs (12W, 230V) with suitable holders, one modular switchboard comprising 4 Nos. one-way switches (6A), 1 No. 3-pin socket outlet (6A/16A) with controlling switch, wiring with ISI marked 1.5 sq.mm copper conductor FRLS PVC insulated wires for light points and 2.5 sq.mm copper conductor wires for plug point, drawn through ISI marked PVC conduit (minimum 20mm dia), open surface wiring on wall including all accessories, connections, earthing, testing and commissioning complete as per IS:732 and departmental standards under the supervision of a licensed wireman and also as per the directions of departmental engineer at site.
Am Construction (BID ID -2433850)
Bidder Name
Am Construction
R K BABU
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1374023.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
viewnit.pdf
Tender Documents • 0.03 MB
viewsbd.pdf
Tender Documents • 1.63 MB
BOQ_1374023.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid