Repairing and Maintenance works of flooring, colour and necessary civil work In New NHL Medical College Boys Hostel building in West zone of AMC area. (A.R.C)

(3) Tender Opening Date :- To be intimated after technical bid eveluation

All Details may be download of above notice will be available in www.tender.nprocure.com

AHMEDABAD MUNICIPAL CORPORATION

Name Of Work :- Repairing and Maintenance works of flooring , colour and necessary civil work In

New NHL Medical College Boys Hostel building in West zone of AMC area. (A.R.C).

Sr.No. Qty Rate Amount

1 1.00 Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft soil Cmt. 115.92

2 1.00 Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff

upto 50 Meter lead.(B) Dense or Hard soil Cmt. 148.19

3 5.00 Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials and

disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

4 1.00 Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials and

disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil Cmt. 160.77

5 1.00 Excavation for foundation for depth from 3.0 m to 5.0 m

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto

Meter lead.(A) Loose or soft soil

6 1.00 Excavation for foundation for depth from 3.0 m to 5.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil Cmt. 172.50

7 1.00 Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering. Cmt. 129.10

8 1.00 Filling in plinth with sand under floors including watering

ramming, consolidating and dressing complete Cmt. 455.63

9 1.00 Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc. complete. Cmt. 286.20

Chapter-4(A), Item Code-04008A, Page No.49

10 1.00 Filling in foundation and plinth with brick Bats Chhara in

layers of 20cm. thickness including watering, remming

and consolidating etc. complete. Cmt. 594.61

Chapter-4(A), Item Code-04009A, Page No.49

11 0.00 Boring holes 3.5 m deep in ordinary soil (for cast in situ

piles) and getting out the soil and disposal of the surplus

excavated soil as directed within a lead of 50 Meter for

following diameter of pipes.(i)200 mm Each 1078.13

Chapter-4(A), Item Code-04010A, Page No.49

12 0.00 Boring holes 3.5 m deep in ordinary soil (for cast in situ

piles) and getting out the soil and disposal of the surplus

excavated soil as directed within a lead of 50 Meter for

following diameter of pipes.(ii) 250 mm Each 1290.97

Chapter-4(A), Item Code-04010B, Page No.49

13 0.00 Boring holes 3.5 m deep in ordinary soil (for cast in situ

piles) and getting out the soil and disposal of the surplus

excavated soil as directed within a lead of 50 Meter for

following diameter of pipes.(iii) 300 mm Each 1509.00

Chapter-4(A), Item Code-04010C, Page No.49

14 0.00 Extra for under reaming inside the bore Holes for under

reamed piles of following Diameter.(i) 200 mm Each 430.32

Chapter-4(A), Item Code-04011A, Page No.49

15 0.00 Extra for under reaming inside the bore Holes for under

reamed piles of following Diameter.(ii) 250 mm Each 516.39

Chapter-4(A), Item Code-04011BC, Page No.49

16 0.00 Extra for under reaming inside the bore Holes for under

reamed piles of following Diameter.(iii) 300 mm Each 642.30

Chapter-4(A), Item Code-04011C, Page No.49

17 0.00 Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or

soft soil Cmt. 201.81

Chapter-4(B), Item Code-04B001A, Page No.50

18 0.00 Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(B) Dense or

Hard soil Cmt. 259.14

Chapter-4(B), Item Code-04B001B, Page No.50

19 0.00 Providing and laying cement concrete 1:3:6 (1- Cement :

3- coarse sand : 6- hand broken stone aggregates

mmnominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth Cmt. 2976.00

Chapter-5, Item Code-05003A, Page No.52

20 0.00 Providing and laying cement concrete 1:4:8 (1- Cement :

4- coarse sand : 8- hand broken stone and curing

complete excluding cost of formwork in (A) Foundation

and Plinth Cmt. 2653.67

Chapter-5, Item Code-05004A, Page No.52

21 0.00 Providing and laying cement concrete 1:3:6 (1- Cement :

3- Coarse sand : 6- crushed stone aggregates 20 mm

nominal size) and curing complete including cost of

formwork in (A) Wall Caps / Coping Cmt. 4006.15

Chapter-5, Item Code-05005A, Page No.52

22 0.00 Providing and laying cement concrete 1:5:10 (1-

Cement : 5- Coarse sand : 10- hand broken stone

aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in

(A)Foundation and Plinth Cmt. 2492.51

Chapter-5, Item Code-05006A, Page No.52

23 0.00 Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth Cmt. 3661.30

Chapter-5, Item Code-05010AA, Page No.53

24 0.00 Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in

(B)Independent piers, columns, and pillars, upto floor

Chapter-5, Item Code-05010BA, Page No.53

25 0.00 Providing and laying cement concrete work 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

mm nominal size) and curing complete excluding cost of

formwork and reinforcement for reinforced concrete

work in (A) Foundations, footings, Base or columns and

Mass concrete Cmt. 3923.53

Chapter-5, Item Code-05011AA, Page No.53

26 0.00 Providing and laying cement concrete work 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

mm nominal size) and curing complete excluding cost of

formwork and reinforcement for reinforced concrete

work in (B) Slabs, landing, shelves, Balconis , Lintels,

Beams, Girders and Cantilever upto floor two level. Cmt. 4012.47

Chapter-5, Item Code-05011BA, Page No.53

27 0.00 Providing and laying cement concrete work 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

mm nominal size) and curing

complete excluding cost of formwork and reinforcement

for reinforced concrete work in (D) Columns, Pillars posts

and struts upto floor two

level. Cmt. 4012.47

Chapter-5, Item Code-05011DA, Page No.53

28 1.00 Providing TMT Bar FE 415 reinforcement for R.C.C.

work including bending, binding and placing in

position complete upto floor two level kg 66.59

Chapter-5, Item Code-05014BA, Page No.54

29 1.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position

complete upto floor two level

Chapter-5, Item Code-05014C, Page No.54

30 0.00 Providing and laying controlled cement concrete M.200

and curing complete excluding the cost of formwork

and reinforcement for reinforced concrete work in

(A) Foundations, footings, Base of columns and Mass

concrete Cmt. 3977.88

Chapter-5, Item Code-05024AA, Page No.57

31 0.00 Providing and laying controlled cement concrete M.200

and curing complete excluding the cost of formwork

and reinforcement for reinforced concrete work in

(B) Walls, from top of foundation level upto floor two

level Cmt. 4484.17

Chapter-5, Item Code-05024BA, Page No.57

32 0.00 Providing and laying controlled cement concrete M.200

and curing complete excluding the cost of formwork

and reinforcement for reinforced concrete work

in (C) Slabs ,landing, shelves,Balconies Lintels,

Beams, Girders and Cantilever upto floor two level. Cmt. 4460.36

Chapter-5, Item Code-05024CA, Page No.57

33 0.00 Providing and laying controlled cement concrete M.200

and curing complete excluding the cost of formwork

and reinforcement for reinforced concrete work in

(D) Columns, Pillars posts and struts upto floor two

level. Cmt. 4558.20

Chapter-5, Item Code-05024DA, Page No.57

34 0.00 Providing and laying controlled cement concrete M.200

and curing complete excluding the cost of formwork

and reinforcement for reinforced concrete work in

(E) Staircases excluding landing upto floor two level Cmt. 5418.91

Chapter-5, Item Code-05024EA, Page No.57

35 0.00 Providing and laying controlled cement concrete M.200

and curing complete excluding the cost of formwork

and reinforcement for reinforced concrete work in

(K) Vertical and Horizontial its upto floor two level. Cmt. 4701.97

Chapter-5, Item Code-05024KA, Page No.57

36 0.00 Brick work using common burnt clay building bricks

having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular Cmt. 4345.02

Chapter-6, Item Code-06001AA, Page No.71

37 0.00 Extra for brick work in super structure above plinth

levelupto floor two level (A) Modular Cmt. 262.35

Chapter-6, Item Code-06006A, Page No.72

38 1.00 Extra for brick work in super structure above floor two Floor

level Item No. 1(6.12) (A) Modular per

Chapter-6, Item Code-06007A1A, Page No.73

39 1.00 (i) Half brick masonry in common brunt clay building

bricks having crushing strengthnot less than 35 Kg/Sq.Cm.

in Cement mortar 1:4 (1 Cement:4-coarsesand) in

foundationandplinth (A) Modular Smt. 584.68

Chapter-6, Item Code-06008A1A, Page No.73

40 1.00 Extra for half brick masonry in super structure above

plinth level upto floor two level. (A) Modular Smt. 47.85

Chapter-6, Item Code-06010A, Page No.75

41 1.00 Half brick thick honey- comb brick work with

common burnt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. (ii) In Cement

Mortar 1:5 ( 1- Cement : 5 - coarse sand) Smt. 298.38

Chapter-6, Item Code-06012BA, Page No.75

42 0.00 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. Height of propping and

centering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (A)

Foundations Footings Bases of Columns etc. and Mass

concrete. Smt. 171.68

Chapter-9, Item Code-09001AA, Page No.81

43 0.00 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. Height of propping and

centering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (B)

Flat surfaces such as soffits of supspened floors slabs

Landings and the like. (1) Floors etc. upto 200 mm in

thickness. Smt. 252.00

Chapter-9, Item Code-09001B1A, Page No.81

44 0.00 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. Height of propping and

centering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (B)

Flat surfaces such as soffits of suspended floor roof slabs

Landings and the like. (2) Floors etc. above 200mm in

thickness. Smt. 270.90

Chapter-9, Item Code-09001B2A, Page No.81

45 0.00 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. height of propping

andcentering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (C)

Vertical surface such as walls (any thickness) partitions

and the like including attached buttresses & string

course & the like. Smt. 229.95

Chapter-9, Item Code-09001CA, Page No.81

46 0.00 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. height of propping

andcentering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (G)

Columns PillarsPosts and struts. (1) Square Rectangular

Polygonal in plan. Smt. 297.68

Chapter-9, Item Code-09001G1A, Page No.82

47 0.00 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. height of propping

andcentering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (G)

Columns PillarsPosts and struts. (2)Circular or curved in

Plan. Smt. 422.10

Chapter-9, Item Code-09001G2A, Page No.82

48 0.00 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. height of propping

andcentering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (H) (1)

Sides and soffits of Beams Beam Haunchings cantilevers

Girders Bressumers and Lintels not exceeding 1 M. in

Depth. Smt. 192.15

Chapter-9, Item Code-09001H1A, Page No.82

49 0.00 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. height of propping

andcentering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (H) (2)

Sides and soffits of Beams Beam Haunchingscanti-levers

Girders Bressumers and Lintels exceeding 1M.in Depth. Smt. 259.88

Chapter-9, Item Code-09001H2A, Page No.82

50 0.00 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. height of propping

andcentering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (I)

Edges of slabs and Breaks in floors and walls. Smt. 67.73

Chapter-9, Item Code-09001IA, Page No.83

51 0.00 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. height of propping

andcentering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (K)

Small surfaceassuch as cantiever brackets and ends

of steps caps and basses to pilasters and Columns and

the like. Smt. 604.80

Chapter-9, Item Code-09001KA, Page No.83

52 0.00 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. height of propping

andcentering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (L)

ChullahHoods, weather shades Chhajjas Corbels etc.

including edges. Smt. 155.78

Chapter-9, Item Code-09001LA, Page No.83

53 0.00 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. height of propping

andcentering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (M)

Staircase with sloping or stepped soffits including

risers and stringers excluding landing. Smt. 242.55

Chapter-9, Item Code-09001MA, Page No.83

54 0.00 Providing formwork of ordinary timber planking so as

to give a rough finish including centering shuttering

strutting and propping etc. height of propping

andcentering below supporting floor to ceiling not

exceeding 4 M. and removal of the same for in situ

reinforced concrete and plain concrete work in. (Q)

Vertical fins and vertical sun breakers. Smt. 382.73

Chapter-9, Item Code-09001QA, Page No.83

55 0.00 Extra for additional height of propping and

centering where the height of propping and

centering exceeds 4 .O M between supporting floor to

ceiling including temporary brick or stone pillars for

supporting as required. (i)Height more than

M.andupto 5.0 M. Smt. 386.48

Chapter-9, Item Code-09002AA, Page No.84

56 0.00 Providing and fixing 35 mm thick shutters for

Doors, windows and clear story windows including

anodised alluminium butt hinges with necessary

screws. (A) Indian Teak Wood (ii) Fully Glazed. Smt. 3211.96

Chapter-10, Item Code-10004BA, Page No.96

57 0.00 Providing and fixing in position collapsible steel

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size with top

and bottom rails of T_rin 40x 40 x 6 mm with 38mm

dia, steel pulleys complete with bolts, nuts, locking

arrangements, stoppers handles including applying a

priming coat of red lead paint.

Chapter-11, Item Code-11003A, Page No.110

58 1.00 Providing and laying 40mm thick marble chips

flooring rubbed and polished (I.E. terrazo) to

granolithic finish with under layer 30mm thick

cement concrete 1:2:4 (1-Cement:2-coarse sand :4-

graded stone aggregate 10 mm and down gauge) and

top layer 10mm thick with white, black or white and blak

marble cihps of required sizes from 1mm to 4mm

nominal size laid in cement marble powder mix 3:1 (3-

Cement : 1-Marble powder by weight) in proportion of

4:7 (4-Cement :7-marble chips by volume) (A) Dark

shade pigment with ordinary cement (In top layer

only) Smt. 749.70

Chapter-14, Item Code-14001AA, Page No.120

59 10.00 Providing and laying Vitrified tiles 8 to 10 mm thick , 36''

x 36'' in flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1- cement : 3-

coarse sand ) finishing with flush pointing in white

cement. Smt. 1469.91

Chapter-14, Item Code-14008DA, Page No.127

60 10.00 P & L 24" x 24" vitrified 8 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement:

6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling

of existing flooring and jointed with color cement

slurry including finised with flush pointing &

cleaning the surface etc. complete for light shade Smt. 1178.10

Chapter-14, Item Code-14022A, Page No.130

61 0.00 Providing and laying white glazed tiles 6mm thick in

flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3- coarse sand

) finishing with flush pointing in white cement.

Chapter-14, Item Code-14008AA, Page No.126

62 5.00 Providing and laying white glazed tiles 6mm thick in

skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry Smt. 1044.23

Chapter-14, Item Code-14009AA, Page No.127

63 5.00 Providing and laying coloured glazed tiles of the size

skirting, risers of steps and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry.

Chapter-14, Item Code-14036, Page No.131

64 1.00 Providing and laying marble stone slab flooring over

20mm (average)base of cement mortar 1:6 (1-

cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 -

coarse sand) laid and jointed with gray cement slurry

including rubbing and polishing complete. (A) Marble slab

25mm thick Smt. 2194.63

Chapter-14, Item Code-14011A, Page No.127

65 1.00 Providing and laying polished Kota stone slab

flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed

with grey cement slurry mixed with pigment to match

the shade of slab including rubbing and polishing etc.

complete. (A) 25mm thick Smt. 982.83

Chapter-14, Item Code-14012AA, Page No.128

66 1.00 Providing corrugated G.I. sheet of class-3 roofing fixed

with glavanished iron J or L Hooks, Bolts and nuts

8mm diameter with bitumen and G.I. limpet washer or

G.I. limpet washer. filled with white lead complete

excluding the cost of purlins, Rafters and Trusses.(1)

mm thick sheet. Smt. 719.93

Chapter-15, Item Code-15001A, Page No.132

67 0.00 Providing valleys 900mm overall in plain 1.6mm thick

G.I. sheet fixed with G.I. J or L Hooks, Bolts and nuts

glavanised iron J or L Hooks Bolts and nuts 8mm dia

G.I. Limpet and bitumen washers

complete. Smt. 1042.78

Chapter-15, Item Code-15003A, Page No.132

68 1.00 Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished

even and smooth in (iii) Cement mortar 1:6 (1-cement:6-

Chapter-17, Item Code-17002C, Page No.136

69 1.00 Providing 20mm thick cement plaster in single coat on

single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (iii)

Cement mortar 1:6 (1-cement:6-sand) Smt. 165.38

Chapter-17, Item Code-17003C, Page No.137

70 1.00 White washing with lime on wall surface (two coats) to

give an even shade including thoroughly booming

the surface to remove all dirt, dust; mortar drops

and other foreign matter. Smt. 12.29

Chapter-18, Item Code-18001, Page No.140

71 1.00 Removing dry or oil bound distemper by a washing and

scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete. Smt. 11.19

Chapter-18, Item Code-18014, Page No.141

72 1.00 Distempering with dry distemper of approved brand

and manufacture (two coats) and of required shade on

wall surfaces of given an even shade, over and including

a priming coat of whiting after thoroughly brooming

the surface free from mortar dropping and other foreign

matter. Smt. 46.94

Chapter-18, Item Code-18016, Page No.141

73 1.00 Finishing wall with water proofing cement paint of on

wall surfaces (Two coats) to give an approved brand

and manufacture and of required shape even shade

after thoroughly brushing the surface to remove all dirt

and remains of loose powered materials. Smt. 56.87

Chapter-18, Item Code-18027, Page No.142

74 1.00 Extra over Item 73 for every subsequent coat of water

proofing cement paint of approved brand and

manufacture. Smt. 31.82

Chapter-18, Item Code-18028, Page No.142

75 1.00 Extra over item 73 for finishing with cement paint on

ceiling and sloping roofs. Smt. 6.47

Chapter-18, Item Code-18029, Page No.142

76 1.00 Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth. Smt. 78.44

Chapter-18, Item Code-18031, Page No.143

77 1.00 Extra over item 76 for every subsequent coat of wall

painting with plastic emulsion pain of approved brand. Smt. 33.39

Chapter-18, Item Code-18032, Page No.143

78 1.00 Extra over item 76 for painting with plastic

emulsion paint of approved brand on ceilings

andmsloping roofs. Smt. 5.36

Chapter-18, Item Code-18033, Page No.143

79 1.00 Painting two coats (excluding priming coat) on new steel

and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the

surface an even shade including cleanicn the

surface of all dirt, dust and other foreign matter.

Chapter-19, Item Code-19002, Page No.144

80 1.00 Painting one coats (excluding priming coat) on

previously painted steel and other metal surface with

enamel paint, brushing to give an even shade including

cleaning the surface of all dirt, dust and other foreign

matter. Smt. 54.35

Chapter-19, Item Code-19003, Page No.144

81 1.00 Painting two coats (excluding priming coat) on new wood

and wood based surface with ready mixed paint,

brushing, oil, gloss, semi gloss to give and even shade

including cleaning of all dust, dirt and other foreign

matter sand papering and stopping. Smt. 104.12

Chapter-19, Item Code-19014, Page No.145

82 1.00 Varnishing two coats (excluding priming coat) on new

wood and wood based surface under coating with

flatting varnish and finished coat with varnish to give

an even surface including cleaning the surface of all

dirt, dust and sand papering so as to produce a smooth

dry surface. Smt. 54.18

Chapter-19, Item Code-19015, Page No.146

83 1.00 Extra over Above item 82 for every subsequent coat of

varnish. Smt. 30.68

Chapter-19, Item Code-19016, Page No.146

84 1.00 Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface

to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth. Smt. 40.19

Chapter-19, Item Code-19032, Page No.148

85 1.00 Demolition and disposal of unserviceable materials with

all lead and lift.(i) Lime concrete.

Chapter-20, Item Code-20001B, Page No.149

86 1.00 Demolition including stacking of serviceable

materilas and disposal of unserviceable materials with

all lead and lift. (i) R.C.C. work Cmt. 1047.38

Chapter-20, Item Code-20002, Page No.149

87 1.00 Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.

(i) In Lime Mortar. Cmt. 362.25

Chapter-20, Item Code-20003A, Page No.149

88 1.00 Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

lift.(ii) In Cement Mortar. Cmt. 544.95

Chapter-20, Item Code-20003B, Page No.149

89 5.00 Dismentalingtiled of stone floors laid in mortar

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift. Smt. 47.25

Chapter-20, Item Code-20005, Page No.149

90 5.00 Dismentaling of wooden floors including stacking of

serviceable materilas and disposal of unserviceable

materials with all lead and lift.

Chapter-20, Item Code-20006, Page No.149

91 5.00 Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materilas

and disposal of unserviceable materials with all lead

and lift.(i) G.I.sheet roofing. Smt. 47.25

Chapter-20, Item Code-20007A, Page No.149

92 5.00 Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materilas

and disposal of unserviceable materials with all lead

and lift.(ii) A.C. sheet roofing. Smt. 53.55

Chapter-20, Item Code-20007B, Page No.149

93 2.00 Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,

holdfasts and other attachment etc. complete and

stacking them within all lead and lift.(i) Not

exceeding 3 Sq.M. in area.

Chapter-20, Item Code-20013B, Page No.150

94 5.00 Dismentling C.I. pipes G.S.W.pipesabd A.C. rain water

pipes with fittings and clamps including stacking the

materials with all lead and lift ( for any dia, of pipe) Rmt. 74.03

Chapter-20, Item Code-20015, Page No.150

95 5.00 Dismantling santtary fittings like wash basin . W.C. pan

Indian and European type, flushing tank etc. including

stacking the materials with all lead and lift. Each 401.63

Chapter-20, Item Code-20016, Page No.150

96 5.00 Dismentling barbed wire in fencing including

making rolls and also including dismentling fencing posts

including all earth work concrete in base and making

good the disturbed ground stacking useful materials as

directed and disposing as directed and disposing of the

unserviceable materials with all lead and lift. Rmt. 66.15

Chapter-20, Item Code-20014, Page No.150

97 1.00 Providing and fixing 1.20 Metre high fencing with

Metre long M.S. Angle posts 40mm x 40 mm x6 mm and

oil painting 3 coats fixed at 2.5 Mt,C/c. with five

Horizontan lines and two diagonals of galvanised steel

barbed wire weighting 9.38 Kg. per 100 Metre, strained

and fixed to posts with G.I,staples including fixing

the postsin ground with 0.5 M x 0.5.M x 0.5 M.

block in C.C1:5:10 etc complete.

Chapter-22, Item Code-22001, Page No.166

98 5.00 Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

following nominal bore, tube fitting and clamps

including making good the wall ceiling and floor.(A) 15mm Rmt. 244.13

Chapter-23, Item Code-23001AA, Page No.172

99 5.00 Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

following nominal bore, tube fitting and clamps

including making good the wall ceiling and floor.(B) 20mm

Chapter-23, Item Code-23001BA, Page No.172

100 5.00 Providing and fixing to wall, ceiling and floor

galvanised Mild steel tubes (Medium grade) of the

following nominal bore, tube fitting and clamps

including making good the wall ceiling and floor.(C) 25mm Rmt. 393.93

Chapter-23, Item Code-23001CA, Page No.172

101 5.00 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2

working pressure poluthene pipes of the following

outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(A) 20mm Rmt. 78.12

Chapter-23, Item Code-23004A, Page No.173

102 5.00 Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2

working pressure poluthene pipes of the following

outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(B) 25mm

Chapter-23, Item Code-23004B, Page No.173

103 5.00 Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

floor.(C) 32mm Rmt. 116.40

Chapter-23, Item Code-23004C, Page No.174

104 5.00 Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure polythene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

floor.(F) 75mm Rmt. 274.68

Chapter-23, Item Code-23004F, Page No.174

105 5.00 Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

floor.(G)110 mm Rmt. 332.91

Chapter-23, Item Code-23004G, Page No.174

106 5.00 Providing and fixing cast iron spigot and socket soil, waste

and ventilating pipes of the following nominal

size.(B) 75mm dia. Rmt. 732.09

Chapter-23, Item Code-23005BA, Page No.174

107 5.00 Providing and fixing cast iron spigot and socket soil, waste

and ventilating pipes of the following nominal

size.(C) 100mm dia. Rmt. 881.64

Chapter-23, Item Code-23005CA, Page No.174

108 5.00 Providing and fixing in position cowel went to

pipes.(B) 75mm dia. Each 385.88

Chapter-23, Item Code-23006B, Page No.174

109 5.00 Providing and fixing in position cowel went to

pipes.(C) 100mm dia Each 496.90

Chapter-23, Item Code-23006C, Page No.175

110 5.00 Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design

with C.I. screaed down or higned grating including cost

of cutting and making good the walls and floor 100mm

inlet and 50mm outlet.(C) 100mm dia. Each 600.08

Chapter-23, Item Code-23008, Page No.175

111 5.00 Providing and fixing water closet squatting Pan

(Indian type W.C. Pan) size 580mm (Earthwork, bed

concrete, footreste and trap to be measured and paid

for separately) (A) Vitreous China.(I) Long pattern =

White colour Each 926.10

Chapter-23, Item Code-23009, Page No.175

112 5.00 Providing and fixing wsh down water closet

(European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement Mortar

1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately)(A) vitreous China

Pattern :(i) in white colour Each 1290.80

Chapter-23, Item Code-23010, Page No.175

113 5.00 Providing and fixing 100mm size P or S trap for water

closet squatting pan including jointing the trap with

the pan and soil pipe in cement Mortar 1:1 (1-Cement

: 1-Fine sand)(A) Vitreous China. Each 311.85

Chapter-23, Item Code-23011, Page No.175

114 5.00 Providing and fixing washbasin with single hole for pillar

tap with C.I. or M.S.brackets painted white including

sutting holes and making good the same but

excluding fittings.(A) Vitreous China:(ii) Flat Back

washbasin 550 mm x v 400mm size. (i) In white

colour. Each 1400.18

Chapter-23, Item Code-23018, Page No.176

115 5.00 Providing and fixing 600mm x 450mm bevelled edge

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers. Each 825.48

Chapter-23, Item Code-23024, Page No.177

116 5.00 Providing and fixing C.P. brass towel rail comlete with

C.P. brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size. Each 597.22

Chapter-23, Item Code-23025, Page No.177

117 5.00 Providing and fixing screw down bib taps of

following size.(A) Brass screw down bib tap polished

bright. (i) 15mm dia. Each 184.98

Chapter-23, Item Code-23028A1, Page No.177

118 5.00 Providing and fixing screw down bib taps of

following size.(B) Brass chromium plated screws down

Bib Tap. (i) 15mm dia. Each 184.98

Chapter-23, Item Code-23028B1, Page No.177

119 5.00 Providing and fixing brass screw down stop tap.(A)

15mm dia. Each 203.79

Chapter-23, Item Code-23030A, Page No.177

120 5.00 Providing and fixing Gun metal check or non-return

fullway wheel valve.(A) 15mm dia. Each 184.98

Chapter-23, Item Code-23031A, Page No.178

121 5.00 Providing and fixing Gun metal check or non-return

fullway wheel valve.(B) 20mm dia. Each 201.80

Chapter-23, Item Code-23031B, Page No.178

122 5.00 Providing and fixing chromium plated brass half trun

flush cock of approved quality including fixing in pipe

line etc. complete.(i) 20mm dia. Each 252.26

Chapter-23, Item Code-23032A, Page No.178

123 5.00 Providing and fixing chromium plated brass half trun

flush cock of approved quality including fixing in pipe

line etc. complete.(ii) 25mm dia. Each 261.16

Chapter-23, Item Code-23032B, Page No.178

124 5.00 Providing and fixing Urinal or approved quality

including conecting the Urinal with waste pipe , tap etc.

complete.(A) White earthenware flat back or corner

type size 430mm x 260mm x 350mm. Each 1026.01

Chapter-23, Item Code-23033, Page No.178

125 5.00 Providing and fixing Urinal of approved quality

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm. Each 1535.63

Chapter-23, Item Code-23034, Page No.178

126 5.00 Providing and fixing ball cock of approved. quality as

directed.(A) Copper Metal (i) 25mm dia. Each 131.57

Chapter-23, Item Code-23037A1, Page No.178

127 5.00 Providing and fixing ball cock of approved. quality as

directed.(A) Copper Metal (ii) 50mm dia. Each 187.96

Chapter-23, Item Code-23037A2, Page No.179

128 5.00 Providing and fixing ball cock of approved. Quality as

directed.(B) Abonite (i) 25mm dia. Each 101.89

Chapter-23, Item Code-23037B1, Page No.179

129 5.00 Providing and fixing ball cock of approved. Quality as

directed.(B) Abonite (ii) 50mm dia. Each 136.52

Chapter-23, Item Code-23037B2, Page No.179

130 5.00 Providing and fixing plastic seat and cover for wash down

water closer with C.P. brass hinges and rubber

buffers. (B) Black plastic seal and cover. Each 288.45

Chapter-23, Item Code-23017, Page No.176

131 5.00 Providing and fixing Rubber plug for sink or wash

basin. Each 16.98

Chapter-23, Item Code-23035, Page No.178

132 5.00 Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete.[A] 15 mm. Rmt. 165.21

Chapter-23, Item Code-23055, Page No.179

133 5.00 Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [B] 20 mm. Rmt. 202.97

Chapter-23, Item Code-23056, Page No.179

134 5.00 Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [C] 25 mm. Rmt. 247.25

Chapter-23, Item Code-23057, Page No.179

135 5.00 Providing and fixing concealed center point to wall

Ceiling & floor CPVC (SDR13.5) PIPE having National

Sanitation Foundation(NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [D] 32mm. Rmt. 330.36

Chapter-23, Item Code-23058, Page No.179

136 5.00 Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR13.5) PIPE having National Sanitation

Foundation(NSF)seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [E] 40mm Rmt. 437.66

Chapter-23, Item Code-23059, Page No.180

137 5.00 Providing and fixing concealed center point to wall ceiling

& floor CPVC(SDR13.5) PIPE having National Sanitation

Foundation (NSF)seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [F] 50mm Rmt. 647.30

Chapter-23, Item Code-23060, Page No.180

138 5.00 Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Chapter-23, Item Code-23061, Page No.180

139 5.00 Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Chapter-23, Item Code-23062, Page No.180

140 5.00 Providing laying and jointing in true line and level

32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials. Rmt. 117.97

Chapter-23, Item Code-23063, Page No.180

141 5.00 Providing laying and jointing in true line and level 40 mm

dia. U.P.V.C. Pipe(SCH-40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

materials. Rmt. 146.65

Chapter-23, Item Code-23064, Page No.181

142 5.00 Providing layingand jointing in true line and level 50 mm

dia. U.P.V.C. Pipe(SCH-40) for cold water including fittings

as approved by Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two metre C/C or

shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

materials. Rmt. 193.73

Chapter-23, Item Code-23065, Page No.181

143 5.00 Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps. (A) 100mm x

100mm size P type. Each 1279.40

Chapter-24, Item Code-24006AA, Page No.184

144 5.00 Providing cement vata (10cm. x 10 cm. size) quarter round

in cement mortar 1:1 including neat cement finishing,

watering etc. complete. Rmt. 23.45

Chapter-17, Item Code-17015, Page No.138

145 2.00 Providing and fixing 30mm thick factory made

moulded door shutter wood free consisting of

frame made out of M.S. tubes of 19 gauge thickness and

size of 25mm x 25mm for stiles, top and bottom

rails, M.S. frame shall have a coat of steel primers.

The inner panel shall consist of 25mm thick High Density

EPS conforming to IS 4671-1984 bonded with 2mm

thick termite proof, water proof and fire resistant

moulded PVC sheet with 2,4,6 raised panel design in

different plain and /or prelim colours after routing the

moulded design on one side and 2mm plain and/or

prelim PVC sheet on other side of the EPS. The edges

of panel to be sealed with lipping of 10mm wide PVC

sheet batton (made by sticking 2 PVC rigid foam sheets

of 5mm thickness using PVC solvent cement) and

stiles 25mm (5mm x 5) thick and 30mm width PVC sheet

fitted along M.S. tube for lock provision and for lock

height 5mm thick PVC sheet of size 150mm x

100mm fixed with upper and lower face of inner side

of EPS panel etc. complete as per direction of Engineer

in charge manufacture’s specification and drawing. Smt. 1960.00

Chapter-10, Item Code-10049, Page No.101

146 2.00 Providing and fixing factory made polyvinyl chioride (PVC)

door frame of the size 50 x 47 mm with a wall thickness of

5mm, made out of extruded 5mm rigid PVC foam sheet,

mitre out of two corners and joined with 2nos. of

150mm long brackets of 15 x 15mm M.s.Square tubes.

The two vertical door profiles are to be reinforced with

19 x 19 mm m.s. square tube of 19 gauge, EPDM

rubber gasket weather seal to be provided through out

the frame. The door frame shal be fixed to the wall

using 65/100 mm long M.S. screws through the frame by

using PVC fasteners. A miniumumof 4 nos.

osscrews to be provided for each vertical members

and minium 2 nos. for horizontal members etc.

complete as per manufactures specification and

direction of Engineer in charge.

Chapter-10, Item Code-10050, Page No.101

147 5.00 Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square or round

bars with round headed bolts and nuts or by screws (A)

Plain Grill. kg 100.17

Chapter-10, Item Code-10025AA, Page No.90

148 5.00 Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square or round

bars with round headed bolts and nuts or by screws. (B)

ORNAMENTAL GRILL kg 143.64

Chapter-10, Item Code-10025BA, Page No.90

149 5.00 Carring out plinth treatment to post construction /

existing structure by spraying chemical solution for

termite control treatment including labour and

material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one percent is

recommended i.e one litre 20 EC chemical emulsion with

19 liter give 1 % concrentration inclusive of one litre

chemical emulsion appication at the rate of 5 Litre

chemical / Sqm of surface is recommended as

per I.S Smt. 104.90

Chapter-22, Item Code-22007, Page No.167

150 5.00 Carrying out timber treatment to all wood work

including drilling holes and spraying oil based

chemical solution on surface of timber work for

termite control including labor and material etc.

complete. Using Chlorpyriphos20 EC as per 6313

Part III (1% concentration by mass) is

recommended one litre chemical emulsion diluted with

19 liters of kerosene. Total diluted

concentration will be 20 liters inclusive of 1 liter

chemical emulsion application in drilled holes and

/ Litre chemical per one Sqmt two coat on wood

surface not protected by paint or varnish.

151 2.00 Providing and fixing Gun metal check or non-return

fullway wheel valve.(B) 20mm dia. Each 201.80

152 2.00 Providing and fixing Gun metal check or non-return

fullway wheel valve.(C) 25mm dia. Each 416.47

153 2.00 Providing and fixing Gun metal check or non-return

fullway wheel valve.(D) 32mm dia. Each 311.61

154 2.00 Providing and fixing Gun metal check or non-return

fullway wheel valve.(E) 40mm dia. Each 656.86

Chapter-23, Item Code-23031B to 23031E, Page No.178

155 Supplying nece hardware, G.I.Fittingsetc.comp of app.

Quality as under

a 1.00 S.S. Stopper 30 Cm long of ASIS 304 No. 180.51

b 1.00 S.S. Stopper 20 Cm long of ASIS 304 No. 126.27

c 1.00 S.S. Aldrop 20 Cm long of ASIS 304 Grade No. 216.10

d 2.00 S.S. Aldrop 25 Cm long of ASIS 304 Grade No. 324.58

e 1.00 S.S. Aldrop 30 Cm long of ASIS 304 Grade No. 396.61

f 1.00 S.S. Handle for door/ window 10 Cm size of ASIS

Grade No. 54.24

Chapter-1, Sr.No. 688 to 693, Page No.27

g 1.00 Ball cock of copper 25 mm diameter Each 112.71

h 1.00 Ball cock of copper 50 mm diameter Each 161.02

i 1.00 Ball cock of abonite 25 mm diameter Each 87.29

j 1.00 Ball cock of abonite 50 mm diameter Each 116.95

Chapter-1, Sr.No. 757 to 760, Page No.29

k 1.00 Labour charges - Carpentar 1st Class Each 725

l 1.00 Labour charges - Carpentar 2nd Class Each 638

m 1.00 Labour charges - Plumber (Fitter) Each 697

n 1.00 Labour charges - Plumber(Fitter)Assist Each 570

156 2.00 Providing and fixing window having extruded

aluminum Colour anodized section frame main

outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt,

horizontal two track member size 61.85 mm x 31.75 mm x

1.20mm @ wt.of 0.695 Kg/mt, vertical member of size

with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member

of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @

Wt. 0.457 Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc complete

for window. Smt. 1696.73

157 2.00 Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x 1.95 mm @

Wt 1.094Kg / Rmt with colour anodized

alluminium frame with 5 mm thick transparent

bronze colour tinted float glass with colour

anodized alluminium frame for ventilation with 5 mm

thick frosted glass as details etc complete

for.window Smt. 1288.93

158 2.00 Providing and fixing window having extruded

aluminum Colour anodized section frame main

outer size 127mm x 38.10mm x 1.35mm @wt.

1.384kg/m, horizontal Four track member size

vertical member of size 122.20mm x 31.75mm x

1.50mm @1.398 kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm@

0.456kg/mt ,vertical member of size 40mm x 18mm x

1.29mm @ 0.456 kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window. Smt. 2119.14

Chapter-11, Item Code-11032, Page No.115

159 2.00 Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x 1.95 mm,@

Wt 1.094Kg / Rmt with colour anodized alluminium

frame with 5 mm thick transparent bronze colour

tinted float glass as details etc complete for Fix

window. Smt. 1509.90

Chapter-11, Item Code-11031, Page No.114

160 2.00 Providing and fixing window having extruded

aluminum Colour Powder Coated section frame

main outer size 63.50 x 38.10 x 1.95 mm,@ Wt

Kg / Rmt, horizontal two track member size

vertical member of size 61.85 mm x 31.75mm x

1.30 mm @ wt.of 0.0.659 Kg/mt with sliding shutters

of horizontal member size 40mm x 18mm x 1.29mm

@ wt.of 0.456Kg/mt, vertical member of size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window.

Chapter-11, Item Code-11034, Page No.116

161 2.00 Providing and fixing rolling shutters of approved make

made of 80 mm wide M.S. laths inter-locked together

through their entire length and jointed together at the

ends by end locks mounted on specially designed pipe

shaft with bracket plates, guide channels and

arrangements for inside and outside locking with push-

pull operation complete but excluding the cost of hood

cover and spring. (A) Shutters having width below 3.5.M. Smt. 2718.41

Chapter-11, Item Code-11006A, Page No.111

162 2.00 Providing and fixing 27.5 cm. long wire spring grade No.2

of approved make for rolling shutters. Each 630.91

Chapter-11, Item Code-11007, Page No.111

163 2.00 Providing and fixing Hood cover for rolling shutters (A)

Shutters having width below 3.5 meters Rmt. 120.03

Chapter-11, Item Code-11008A, Page No.112

164 1.00 Providing and laying Cement concrete 1:5:10 (1-

Cement : 5-Fine sand :10-Graded stone aggregate

40mm nominal size) bedding for stoneware pipes of

following internal diameters with necessary

formwork and curing complete.(A) 100 mm dia. (112

mm Ave.bed thickness) Rmt. 125.90

Chapter-24, Item Code-24002A, Page No.183

165 1.00 Providing and laying Cement concrete 1:5:10 (1-

Cement : 5-Fine sand :10-Graded stone aggregate

40mm nominal size) bedding for stoneware pipes of

following internal diameters with necessary

formwork and curing complete.(B) 150mm dia.

(166mm Ave. bed thickness) Rmt. 211.59

Chapter-24, Item Code-24002B, Page No.183

166 0.00 Constructing brick masonry chamber for

underground C.I.Inspection chamber and bends with

bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I.cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for

single pipe line. Rmt. 2903.89

Chapter-24, Item Code-24016AA, Page No.189

167 0.00 Extra over items 136 for every additional depth of 0.1M.

of part thereof beyond 450mm depth for Brick

masonry chamber.(i) for 455mm x 610mm size. Each 239.99

Chapter-24, Item Code-24017A, Page No.190

168 RCC Precast M.H.Frame& Cover Manufacture , supply &

Delivery at store or at side of work Precast RCC M200

Frame & Cover Suitable to drainage M.H. and as per type

design & Drawing including cost of reinforcement M.S.

Angles or Flat , cutting mold work etc.(GWSSB SOR 2021-

1 1 Frame Suitable for 50 Cm opening of MH No. 1255

2 1 Cover Suitable for 50Cm Opening Of MH No 1314

1 1 Frame Suitable for 50 Cm opening of MH No. 1120

2 1 Cover Suitable for 50Cm Opening Of MH No 1194

c House connection Chamber Light Duty

1 1 Frame No. 911

169 1.00 Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm

height and 15cm thick of M200 grade concret as per

approved design and including excavation for fixing

in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Chapter-14, Item Code-14023A, Page No.130

170 2.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically

and as per approved design Confirming to IS

15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level

as per guidlines of IRC : SP 63- 2018 etc. Complete. Smt. 680.10

171 1.00 Providing and fixing eco-friendly light weight

calcium silicate false ceiling tiles having Tegular

edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight

calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal

Insulation . The Light weight calcium Silicate tile

shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe having

NRC value of 0.75 NRC or equivalent of size 595 X 595 mm

to be laid on true horizontal level suspended inter

locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably

spaced at joints to get required length and size of

24X38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24X28mm

made out of 0.33mm (Minimum) sheet spaced 1200mm

along spaced between main ‘T’ at 600mm centre

to centre to form agrid of 1200X600mm and

secondary cross ’T’ of length 600mm and size

24x28mm made of 0.30 mm thick (Minimum) sheet

172 1.00 Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized

with zinc coating of 120 gms/sqm (both side inclusive) as

per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at

1200 mm centre to centre, one flange fixed to the ceiling

with dash fastener 12.5 mm dia x 50 mm long with 6 mm

dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at

450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long

G.I. wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of

mm and 30 mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450 mm

centre, with 25 mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall

screws of size 3.5 x 25 mm at 230 mm c/c, including

jointing and finishing to a flush finish of tapered and

square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both

sides of joint and two coats of primer suitable for board,

all as per manufacturer’s specification and also including

the cost of making openings for light fittings, grills,

diffusers, trap doors, cutouts made with frame of

perimeter channels suitably fixed, providing additional

sections for strengthening the oenings/cutouts,

Trapdoors all complete as per drawings, specification and

direction of the Engineer in Charge. Area of cutouts shall

not be deducted and no extra payment shall be

considered for additional sections provided. Only plan

area shall be considered for payment. All curved surfaces,

recesses, waffles and corbellings shall be part of the false

ceiling & flat area in plan shall be measured for payment.

The rates are also inclusive of necessary scaffolding, tools,

tackles etc. Complete for all floors and height with frame

wherever required for electrical & A.C. fixtures & grill all

as per drawings, specification and direction of the

Engineer in Charge. all as per manufacturer’s

specification and as per drawings, specification and

direction of the Engineer in Charge. Excluding the cost of

painting with :12.5 mm thick tapered

edge gypsum plain board conforming to IS: 2095- Part I Smt. 718.57

173 50.00 Dismantling aluminium/ Gypsum partitions, doors,

windows, fixed glazing and false ceiling including disposal

of unserviceable surplus material and stacking of

serviceable material with all lead as per instruction of EIC. Smt. 17.68

174 5.00 Plywood

Providing and fixing in position Marine Plywood of

specified thickness following code IS 710 - 1976 of

approved makes as per Interior design drawing/

Instruction of EIC for all type of loose and fixed furniture,

Panelling, Partition, Bed head panel etc. The rates are

inclusive of all lead and lift,all floor levels, all heights, all

material, fixing, scaffolding, labour, Wastage etc.

complete in all respects. a)Plywood 19mm th. Smt. 806.25

175 5.00 Extra over for plastering on ceilings andsofits of stairs

upto floor two level instead of plastering on walls. Smt. 24.57

176 5.00 20 mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of 12 mm

thick backing coat of C.M.1:3 (1-cement:3-

sand)and8mmthickfinishingcoatof C.M. 1:1 (1-cement : 1-

sand) etc. complete.

177 50.00 Cutting out cracks of roof terrace to V- section , cleaning

out, wetting , grouting with cement and sand slurry 1:3

(1-cement 3-sand ) Rmt. 64.58

178 Conveyance charge of earth, lime, murrum, building

rubbish, manure, garbage, sludge, excavated rock, fly ash,

aggregates of any kind executed outside the road site.

Rate also includes spreading & levelling etc complete.

Internal conveyance above 50 mt done within the work

site is not payable.

10.00 a) Lead From 5 Km to 10 Km. Cmt. 78.54

10.00 b) Lead From 10 Km to 15 Km. Cmt. 104.65

179 10.00 P/A Tremix with dewartering machine and floater

machine on constructed CC work for finishing the surface

as per requirement. The rate including all machinaries,

labor, loading, unloading, transportaion etc complete as

per direction given by engineer in charge. Smt. 54.00

180 10.00 Making 15 mm. Groove in RCC work on road & filling it

with polysulfiedselant& finished ot good incl. all labour

charges etc. comp.as directed. Rmt. 30.00

181 Repairing damaged M.H. and rasing M.H. up to road level

incl. removing damaged brick work and repairing by brick

masonry in C.M. 1:5 and plaster in C.M. 1:3 and fixing C.I.

steps and existing MH sheet cover, removing the debris

from MH and carting the same as directed.

1.00 (A) up to 0.15 mt. (@ Two Coarse) No. 728.82

1.00 (B) up to 0.35mt. (@ Four Coarse) No. 1155.44

1.00 (C) up to 0.65 mt. (@ Seven Coarse) No. 1786.49

182 Constructing Chamber of following size including

excavation, refilling, BBCC (1:5:10) for foundation,

C.C.Channel (1:2:4), finished 15 mm thick cement plaster

inside in CM 1:3, finishing with cement slurry, Brick

masonary in CM 1:5 & excluding the cost of chamber seat

cover etc.completed.

a 1.00 0.60 X 0.45 mt. size Inside Clear, Depth from 0.0 to

0.90 meter No. 2261.61

b 1.00 0.60 X 0.75 mt. size Inside Clear, Depth from 0.0 to

0.90 meter. No. 2874.11

c 1.00 0.75 X 0.75 mt. size (Inside Clear) Depth from 0.0 to

meter. No. 3905.36

183 5.00 Constructing Bombay Pattern Type Catch Pit of size 0.60 x

0.60 depth up to 1 mt including excavation, B.B.C.C.

(1:5:10), 23 cms thick brick maso. wall in the prop. of CM

(1:6) with 40 mm thick IPS flooring in the prop M15 at

bottom and 15 mm thick cement plaster inside the catch

pit in the proportion of CM (1:3) with outjali etc. comp. as

directed. No. 3110.80

184 1.00 CatchPitJali (Heavy duty) Fixing P/F FRC catch pit jali with

frame 600mm x 600mm clear opening etc. comp.. As

directed by engineer in charge. No. 1377.64

185 R. C. C. PIPE (Vertical Cast) Providing and supplying ISI

Standard R.C.C. pipes in standard lengths of following

class and diameter suitable for either collar joints or

rubber ring joints including all taxes, insurance,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores,

stacking etc Note : One collar should be supplied with

each full length plain ended RCC pipe, cost included in

rates below. One rubber ring should be supplied with

each full length socketed pipe, cost included in rates

185 A Lowering, laying and jointing R. C. C. pipes of following

diameters in proper position, grade and alignment at all

level as directed by Engineer-in-charge including

conveyance from stores to site of work, labour, giving

hydraulic testing as per ISI code.

186 Providing and supplying,and jointing ISI mark only

standard length stoneware pipes of following class and

diameter including excavation for laying of pipes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. compl. (IS651/1989 or

its latest revision) including labour work for lowering,

laying, joiting with cement mortar (1:1) proportion,

proper postion, grade and alignment and all level as

directed by engineer in charge including store to site of

work jointing material etc complete.

a 6.00 100 mm dia Rmt. 165.52

b 6.00 150 mm dia Rmt. 242.98

c 6.00 230 mm dia Rmt. 400.54

187 1.00 Hiring Charges For J.C.B.MachineInclduing Cost Of Fuel,

Operator, Dirver Etc.. Hr 600.00

188 1.00 Supplying Pneumatic Breaker Machine for RCC Slab or

Asphalt Demolishing Work on site by using Operator, fuel,

power Supply etc. Complete as Directed. (No payment

should be allowed for non working condition of

machinery and for pipe line excavation and M.H. work.

Allowed only for break down work) (Based on Previously

approved rate by C E sir ) Hr 600.00

189 Constructing Slab type M.H. Chamber of the following size

including excavation, refilling, brick bats cement concrete

(1:5:10) of thickness 15 C.M., CC Channel (1:2:4) of

thickness 10 C.M., finished 15 mm thick cement plaster

inside & outside (Only for shaft) in CM 1:3, finishing with

cement slurry, P/F 4 mm diaM.S.Steel HDPE coated steps

35 cm c/c at 35 cm staggered in masonary CM 1:5, RCC

Slab in CC 1:1.5:3 of thickness 23 C.M., including

Cantering & reinforcement (double jalli at 15 C.M. c/c

bothway 12 mm dia.) but excluding the cost of Manhole

seat cover etc..completed. of Size 1.00 X 1.40 meter

(Inside Clear, M.H. length should be parallel to the flow.

a 0.00 1.00 to 2.00 meter depth, (Slab at Ground level) No. 10177.68

b 0.00 2.00 to 3.00 meter depth, (Slab at below 0.6 mt. From

c 0.00 3.00 to 4.00 meter depth, (Slab at below 1.00 mt. From

190 Making connection to the ex.M.H.in running sewer incl.

Dewatering and other required machinery etc. of

following dia pipes at any convenient time. All damaged

work shall be well repaired as per instructions.

a 4.00 a. 150 mm to 300 mm dia. No. 1339.29

191 Cutting the pipes of following dia coming in the new

M.H.in running sewer including cutting bars, including

removing debris /silt from the M.H. and carting at a

suitable distance etc..complete as directed. No payment

for M.H. work will be made until pipe is not cut

completely in all respect.

a 5.00 150 mm to 300 mm dia. No. 1133.93

192 Providing Kachhaof Pakka Dummy in the following dia

pipes and removing the same after completion of the

connection work as directed.

a 5.00 (A) 100 mm to 300 mm dia. No. 199.11

b 5.00 (B) 350 mm to 600 mm dia No. 302.68

193 5.00 Providing Dead Cantering using good quality Country

Wood Planks, wall Plate of required thickness and size

including placing the nece. supports of reqd. size, nailing,

fixing with mortar, levelling. All specification for dead

centring as per standard engg. practice etc. comp. as

directed. Smt. 312.50

194 1.00 Providing and operation dewatering Pump including fuel

charges & operator Charges etc. as directed etc. comp.

(Shift for Eight Hour) (For Each Pump Set, No payment

should be allowed for non working condition of

195 1.00 Providing & Fixing the double layer safety net along the

scafolding to avoid any free fall of debris etc. complete. Smt. 194.00

196 1.00 Providing & Fixing the green/black colour hessaian cloth

to cover the scafolding etc. complete. Smt. 51.00

197 1.00 Structural steel work ( Confirming to IS 4923- 1997)

riveted, bolted or welded in builtup for all type sections,

in framed work, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel

primer all complete as per the structural designs and

directions of Engineer in charge. Safety grills/doors of

required pattern for windows / Door/ ventilators using

M.S. flats/bar/box sections as per design and drawing

including one coat of primer. Kg 126.68

198 1.00 F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers &

Frames Cover : 728mm ø & 100 mm thick circular cover,

35.00 MT load design, 100x2mm MS flat allround, 16mm

ø plain round bar for lifting the cover & should be fitted

with plastic cups. Frame : 560 mm ø clear opening, outer

size- 888x888x175 mm. On the upper periphery of frame

25 x 3 mm wide MS flat should be well embed in concrete

to protect the edges of frame. FRC E.H.D.-35 manhole

cover & frame described as above Set 3354.74

199 1.00 F.R.C. Heavy Duty [HD-20] Machinehole Covers - 560 mm

ø clear opening, The dimension of frame and cover as per

mentioned in Amend No.1 to IS 12592 : 2002 table 1. No. 1720.44

200 1.00 F.R.C. Medium Duty [MD-10] Machinehole Covers -

560mm ø clear opening, The dimension of frame and

cover as per mentioned in Amend No.1 to IS 12592 :

201 1.00 Carting and Fixing M.H., Chamber or Catchpite Seat and

Cover in line and level to match exisisting road level in

C.C. 1:2:4 and finishing smooth, watering and protecting

for 7 days etc. complete as directed. M.H. seat cover will

be supplied byA.M.C.(from any store) No. 750.00

202 Supplying, labour for break down repairing work for

activities like excavation, disliting, removing debris from

trench back filling etc. comp. as directed by Eng.in charge.

1.00 Mazdoor at day /Night No. 363.30

1.00 Fitter at day / Night No. 380.30

1.00 Makadam/ supervision at day / Night No. 379.46

203 P/F. to wall ceiling and floor galvanized mild steel tubes

(Medium grade) of the following nominal dia. with all

tube fittings and clamps incl. making good the wall, ceiling

and floor. (At any floor level) (Bldg.Sor 2015-

204 1.00 Providing & Applying Cement Popada Plaster In

Cement Mortar In 1 : 3 Incl. Cleaning Surface Before

Plastering Rate Also Incl. Scafloding, Watering , And

Neat Finishing Etc. Comp. As Dire.(N.S./ARC) Smt. 120.00

205 1.00 Providing and applying fibere reinforced cementitious

micro concrete work in cellings and beams incl.mixture of

CEMSCREED HM (F) fair mate company material, FBR

bonding agent material with water in suItable proportion

anti corrosive treatment on exposed beam,celling steel

bars with safeCore R incl.all kind of labour

etc.comp.including three coat of white wash.(Approved Smt. 530.00

206 1.00 Labour Work for moulding the polish kota stone surface

rate also including provding cutting and grinder machine

for molding work etc.complete as directed.(app.rate) Rmt. 150.00

207 15.00 Labour work for Polish kota stone surface rate also

including providing cutting and grinder machine for

molding work etc comlete as directed.(app. rate) Smt. 64.00

208 1.00 Providing And Laying Cement Concrete Flooring For

I.P.S.1:2:4 (For Indian Patent Stones) (1 Cement: 2 Coarse

Sand:4 Graded Stone Aggregate 20 Mm. Nominal Size)

Lain In Layer Finished With A Floating Coat Of Net

Cement.(40 Mm Th.)(SOR 2021-22 P.160,Item

209 1.00 Additional Rate For Providing Water Proofing Solution in

I.P.S Smt. 25.00

210 1.00 Providing and Fixing pvc.Door (sintex door-equivalent)

with necessary alluminium fitting with EL-7 section frame

(Approved Rate as per ARC) Smt. 1617.00

211 1.00 P/F glass of 4 mm thik for vent lowers and window with

wooden border patti as per instruction of eng. In

chage.(app.rate) No. 150.00

212 Providing and fixing rough cast wired glass 6 mm thick

bedded in putty and thick with wooden beading including

the cost of wooden beadings of Indian teak wood and

necessary cutting of glass. (SOR 2021-22 PG NO-

1.00 (C) wired figured glass. Smt. 659.58

213 1.00 Labour work for fixing above or any interlocking

blocks/nimbhada on up to 50mm th sand

bedding,levelling,wateringanf fixing. Rate incl. average

30cm depth for excavation and or filling,carting away

debries/excavated material up to 5 km and cleaning the

site etc.comp. as directed.I00194 Smt. 69.64

214 1.00 Providing & Laying China Mosaic Flooring On Terrace

With 6Mm Th.White Or Coloured Glazed Tiles Chips Of

Mini.25 To 35Mm Approved.Square Or Rectangular Shape

& Fixing It.Before Start The Work Remove All Existing

Flooring & Open Old Slab Surface With Wire Brush & Fill

Crack If Shown With Water Proof Material.Than For

Making Level Gps.Work Done In Mini.45 To 50 Mm

Th.&Fixing.China Mosaic In Cm 1:3 With Neat Cement

Slurry At Top & Filling The Gap With White Or Colour

Cement With Finishing Smooth Surface & Even Shade

Incl.Cleaning Of All Dirt,Dust& Other Foreign

Matter.Rate Including For Making Colour

Patta,RoundVata With Fixing Neccessary Water Spout

Opening Gap Etc.Comp.As Directed.(As per A.R.C)

215 1.00 Providing and laying polished granite stone slab 18 mm

thick in risers of steps, dedo and pllars laid on 10 mm

thick cement mortar 1:3 (1 cement : 3 coarse sand) and

jointed with gray cement slurry including rubbing &

polishing etc. complete. (SOR 2015-2016,SR. NO. 23A

216 1.00 Providing & fixing 2.00 mm thick F.R.P. sheet of good

quality and standard make rate also includes necessary

fabrication structure in the grid of 1'-6" x 1'-6" size usiung

hollow pipe of size 3/4" x 3/4" , 2" x 1" & 1" x 1" rate also

inclusive necessary bending ,cutting and fabrication

charges and priming coat and 2 coats of oil paint of shade

approved by engineer in-charge rate also includes washer

and silicon paste required for fixing the sheet in good

quality as diredted.(As per ARC) Smt. 1865.00

217 1.00 Conveyance charges of earth lime, murrum, building

rubbish, manure, garbage, sludge, excavated rock, fly ash,

aggregate of any kind etc. comp. upto 5 km lead.

218 1.00 Providing & Fixing Chromium Plated Brass Flush Cock

With Lever Of "EssEss" - Trend Series Or Equivalent

Make Incl.Fixing In Pipe Etc.Comp.AsDir.OfEngg.In

Charge.(N.S.) (1) 25 Mm Dia.I00117 No. 1800.00

219 1.00 Provdg. & fixing 12.5 lit.PVC Flush tank with

nece.fixturesetc.comp as per site condition (R&B Sor 21-

220 20.00 P/F Jet Spreay at Europeon WC Pan, inclnece. lath

connection, stop cock, and other fixing material and

labour as per inst. of engineer in charge(R&B Sor 21-22 I.C

221 1.00 Providing & Fixing Polytheline Over Head Tank With

Necessary Dia.Holes For Outlet,Inlet Over Flow And

Washout Necessary Washer And CheckputEtc.Comp.(N.S.)

222 10.00 P &F app.quality for Conseal lock in Alu.door .as per inst

of engg in charge .etc.comp.(app.rate) No. 300.00

223 1.00 P &f app.quality for brass baby latch (door stopper) as

per inst of engg in charge .etc.comp (app.rate) No. 180.00

224 1.00 Providing & Fixing In Position Alluminium Doors With

Frame Using Approved Quality Anodised Extruded

Alluminium Section As Approved By Engg.In

Charge(Jindal Alluminium) (A)Frame Sections

101.6x44.45 Mm(B)Shutter Bottom Vertical & Top

Section 83.5x44.45 (Wt.1.31 Kg/Mt.)(At

1.31Kg/Mt)(C)Shutter Bottom Section At14.3x44.45 Mm

At (1.37 Kg/Mt) Shutter Middle Section At 100x44.3

Wt.(1.37Kg/Mt) Incl.Providing& Installing 5 Mm Thick

Approved Color Acrylic Sheet Of Standard Quality

Fixed With Glazing Chips On Upper Pannel&

Laminated Sheet On Lower Pannel (Wtt.0.13 Kg/Rmt)

Etc.Comp.As Direction Of Engg.In Charge. (N.S.) I00134

225 1.00 Providing & Fixing In PositionAlluminium Window Sliding

/ Fix Type With Frame Using Approved Anodised

Extruded Alluminium Section As Approved By Engg.In

Charge.(Jindal Alluminium) Units Equivalent (A) Frame

Sections 65 X 25 Mm (At 0.41kg/Mt) (B) Sliding Frame

Bottom Section Of 61.85 X31.75 Mm (At 0.41 Kg/Rmt)

(C) Shutter Top & Bottom Section 40 X 18 Mm

(Wt.0.41 Kg/Rmt) (D) Shutter Interlock Vertical Section

10 X18 Mm.(0.41 Kg/Rmt) (E) Shutter Vertical Of 40 X

18 Mm (0.41 Kg/Rmt) Including P/F Installing 5 Mm

Thick Approved Color Acrylic Sheet Of Standard

Quality Etc.Comp.(N.S.) Smt. 2350.00

226 1.00 Provding& fixing Aluminum section partition with powder

coating using 2.5'' x 1.5'' all section work incl.p/f 5 mm

thick glass in upper portion and 10 mm th.Novapan panel

in lower section Work incl.fixing the partition in wall/floor

with nece.screws,rubber gasket & other fittings etc.comp.

as directed by engg.incharges. Smt. 2500.00

227 1.00 Providing & Fixing In Position Alluminium Vents With

Frame Using Approved Anodised Extruded Alluminium

Section As Approved By Engg.In Charge.(Jindal

Alluminium) Units Equivalent (Approved Rate) Frame

Section Of 63.50 X 38.50Mm (Wt.0.68 Kg/Rmt)

Incl.Providing& Installing 5 Mm Thick Approved Color

Acrylic Sheet Of Standard Quality Etc.Comp. I00136 Smt. 1950.00

228 1.00 Providing fiiter for D.I./P.V.C./C.I./M./A.C. Pressure water

pipe linmaintenance work with necessary manpower,

tools, plants, and equipments, and any other works

required for AMC as per instruction of Engineer in charge

etc. complete. I03723 As per Market Rate No. 474.00

229 1.00 Providing and fixing stoper (M.S.) 6 inch with necessary

fiting in wooden door including removel of old fiting if any

etc completed as directed. I00870 6 inch No. 47.00

230 1.00 Providing and fixing Aldrop 10 mm size (M.S.) with

necessary fiting in wooden door including removel of old

fiting if any etc completed as directed. I00872 Aldrop

231 1.00 Providing and fixing handle (M.S.) 4 inch size in with

necessary fitting in wooden windows including removal of

old fitting if any etc completed as directed.I00873 No. 39.00

232 1.00 Providing and fixing stopper (aluminium) 6 inch with

necessary fiting in wooden door including removel of old

fitting if any etc completed as directed. I00890 6 inch No. 40.00

233 1.00 Providing and fixing Aldrop 10 mm size (aluminium) with

necessary fiting in wooden door including removel of old

fiting if any etc completed as directed I00891 No. 138.00

234 1.00 Providing and fixing handle (aluminium) 6 inch size in with

necessary fitting in wooden door including removal of old

fitting if any etc completed as directed.I00889 No. 36.00

235 1.00 Reparing of existing Aluminium window/door/partition by

making necessary addition/alteration in same sides. Rate

incl of necessary fittings required and all labour included.

If necessary rate also incl. of removing from position and

refixing it at same place after repairing it, etc comp. as

directed. Sub Desc : As per approved rate of AMC MET

236 1.00 Repairing of Doors/Windows shutters and Frames

including refixing-aligning shutter, providing, replacing,

fixing MS hinges, Aluminium aldrops, stoppers, tadi etc.

complete excluding painting as per

specifications.(app.rate) No. 250.00

237 1.00 Providing & Fixing wall,ceiling and floor 10 Kg.F/Sq.Cm

160 mm working pressure polythelene pipes of low

density, complete with special flange compression type

fittings,wall clips etc.making good wall ceiling and floor as

directed by engg.in charge etc.comp. Rmt. 785.00

238 1.00 P/F. 10 mm thick Novapan sheet of approved quality

including fixing on partition with necessary all fixtures as

directed by engg.in charge etc.comp Smt. 1400.00

239 1.00 P/F. new 12.5mm th. Gypsum board ceiling with

necessary heavy weight GI framing members as per site

requirement.Work incl. Supplying of app.brand gypsum

boards and fixing it as false ceiling in line and level with all

necessary hardware and labour etc. comp.as dire. (At any

floor level) Smt. 650.00

240 1.00 GLASS FILMS (sun control, Safety film, decorative,

reflective, frosted, opaque film etc) Imported Lumaar

make as approved by engg.in charge etc.comp. Smt. 540.00

241 1.00 Providing and fixing 4 mm th. Acrylic sheet of approved

quality including fixing with door/window shutter &

frames with necessary all fixtures as dircted by engg.in

charge etc.comp. Smt. 3140.00

242 1.00 Providing & Fixing Floor Spring including fixing shutter

etc. complete as per inst. of engineer in charge. No. 3300.00

243 5.00 P/F. thermocol ceiling with necessary aluminium T section

25 x 25 x 1.2 mm inclusive fixing it to all wall to ceiling

junction and at junction position of two sheets ,item also

includes p/f 20 mm thick plain thermocol sheets size (1 x

0.5 mt) with all necessary fastening and hardware etc.

comp.as dire. (At any floor level) Smt. 375.00

244 1.00 Labour charges for cleaning U.G. & O. H. tank by modern

science technology with six stage process as below (1)

Dewatering existing water by submersible pump. (2)

Hydrojetting by 150 kg. per sq.cm pressure. (3) Vaccum

cleaning to suck the sludge & Turbidity on bottom surface

(4) Heat air system by 80 degree c. tmp. for drying corners

& all sides of tank. (5) Anti bacterial chemical spraying to

all surface of tank and then (6) Ultra violet radiation pan

Treatment to tank in this six stages on site classic supply

etc. shall be provided by Muni. Corporation. without

charging any extra cost. The complete tank ckeaning by

mono cleaning systems as directed, rate of above process

are as below capacity of tank. (Approved Rate) Smt. 650.00

245 1.00 Providing and applying texture paint at approved quality,

colour scheme, including preparation of surface, primer

coats+2 coats of putty and texture paint, as per

manufacture's specification, scaffolding, roller finish etc

complete as per instruction of engineer in charge Smt. 495.00

246 1.00 Supplying and installation of 10mm thick recycled rubber

flooring having anti-skid and sound absorbing properties,

square shaped, with different coloroptns for create

flooring pattern, should be installed with proper adhesive

as per manufactures's guidelines, joints of surface to be

done properly to prevent dirt &watepenetration inside

the surface. etc complete as per instruction of engineer

in charge Smt. 1234.00

247 2.00 Arrangement of zula with two or nece. skilled labour for

repairing & maintenance work out side building work

etc.complete as per insructerincharge(At any floor level) No. 950.00

248 8.00 Providing Scaffolding for Demolition Plaster Work &

painting workby 'H' Frame Stand of by any means like

bamboo, balli etc. including carting material work site and

removing after completion of work. Rate include any type

rent etc. complete for any height as directed by engg. in

charge. Smt. 40.00

249 10.00 Providing, Manufacturing, Fixing Chain Link Jali 8".0" X

4".0" as per detailed Sketch & instruction of Engineer in

Charge same as Lal Darwaja Garden Pattern Consisting of

3" dia MS pipe A class 5".4" height fixed at 8".9" in C.C.

(1:2:4) block of 9" X 9" X 9" size chain link jali 2" X 2" X

gauge fixed in 35 X 35 X 5 mm MS angle frame of 8".0" X

4".0" size with MS flat of size 25X3 mm welded with jali

etc. Comp. The Jali is to be Welded to MS angle with MS

Flat as per instruction given. The MS Pipe Jali, MS angle

frame are to be painted one coat of primer & two coats of

paint as directed, in line and level.The two hold fast has

been welded at equal distance at the bottom angle of jali

for support fixed in C.C. as directed by Engg. in Charge. Rmt. 1940.00

250 94.00 Signages:

Providing and fixing Aluminum Composite Panel signages

of various size and in any language. The 2 mm thick

Aluminum composite panel shall be cladded with retro

reflective high intensity grade radium sheets. The

signages shall be of any language Sq.

251 0.00 G.I. Coupling 50 mm dia A-Class RMT 80.51

252 0.00 G.I. Coupling 40 mm dia A-Class RMT 40.68

253 0.00 Providing & Fixing Door closer-complete of Approved

make to wooden / Alluminium Doors as per direction of

engg.in charge.(N.S.) No. 480.00

254 8230.00 Providing and laying 4 to 4.5 mm thick 5 layer acrylic

synthetic flooring based emulsion to improve bond of

acrylic court system with the marking should be done

with overline paint. The product must be Sft 55.00

approved/licenced/preferred by indian/international

sports federation.

The Rates are Exclusive of GST. Prevailing GST will be paid separately.

Contractor’s Quoted Rate

IN FIGURE IN WORDS

Net Quoted Tender Amount Rs.

Seal and Signature of the Bidder Additional City Engineer

mobile no. (Amc met/Hospital)