Estimate for Moderinization of Gates and Gearing system of Head Regulator of 3-R disty. off taking at RD 142500 of Sidhwan Branch

Amount

Providing of hollow bulb seal 100x44 mm and fixing in position including preperation of surface complete in all respects

Providing and fixing in position of Flat wedge seal 80x12mm including preperation of surface complete in all respects and to entire satisfaction of engineer incharge

Supply of MS Flat 2" wide 8mm thick for fixing Seals

Providing and fixing galvanised nuts and bolts of all size and lengths required

Supply of Skin plate 6 mm thick on both front and back side

Supply of ISA 65x65x6 mm for Railing

Supply of Channel sections ISMC 225

Supply of Channel sections ISMC 125

Supply of ISA 65X65X6 mm

Suppy of Chequered Plate 6mm for platform

Supply of Multipurpose synthetic hetiv grease

Supply of Mutigrade mobil oil 10w-40 or 10w-50

Painting two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint.

Painting two coats with synthetic enamel paints on metallic surface to give an even shade.

Scraping brushing of Whole Structure to remove rust, dirt and dust etc.

Aplying Priming coat with metallic primer on new steel or iron work i/c prepairing of surface (CSR Item No. 16.31 a)

Commisioning and testing of gates at site complete in all respects and to entire satisfaction of engineer-in-charge

Providing 7 watts LED 40 watt solar panel 12-V battery- 40 amp with T-gel battery

First Class burnt Brick Work laid in CSM 1:3 including supply, carriage and loading & unloading of cement, sand & bricks complete in all respect.

Dismantling of brick work in cement sand mortar

Cement concrete 1:2:4 with stone ballast or shingle using concrete mixer volumetric type

Dismantling concrete plain 1:2:4

Advance Direction sign board 1200X900mm Rectangular advance direction sign board 1200x900mm rectangular as per IRC 67-2001 with retro reflective high intensity microprismatic grade sheeting fixed over 2mm thick aluminium sheet with 25x25x3mm angle iron frame supported on two mild steel angle iron posts 65x65x6mm firmly fixed to ground in foundation concrete 1:2:4 of size 0.60x0.60x0.75m for vertical post complete as per technical clause 801 of MORTH&H retro reflective sheeting type XI as per ASTM D 4956-09 and as per IRC 672012. Fixed over 4mm thick aluminium composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy riverts @ 200 mm c/c back support frame of 25x25x3mm angle iron supported on a mild steel angle iron post 65x65x6mm without cost of defination plate firmly fixed to ground in foundation concrete M-25 of size 0.45X0.45X0.60m for vertical post complete as per clause 801 of MORT&H specification.

Removing damaged structural steel and stacking clear from working space by Gas cutting complete in all repects and to entire satisfaction of engineer-in-charge.

Cutting and straightening charges complete in all repects and to entire satisfaction of engineer-in-charge

Fillet welding 10 mm with high strength steel rods complete in all repects and to entire satisfaction of engineer-in-charge

Industrial Gears India