REPAIR OF STEEL WOODEN AND TP FURNITURE AT OTM AND CGRA AT PARADIP UNDER GE I CG BHUBANESWAR

Amount

SCH 'A' PART-I (REPAIRS TO STEEL FURNITURE): Repairs to " Metal Chairs With / With out arms non revolving and nontilting type equivalent to DRG No: FD-75 (M) and Chair CB Steel with/With out Arms (Drg No:- FD-75M) and replacement of components as following as shown in drawing complete all as specified and directed:-

M&L with replacement of unserviceable seat / back seat of chairs of size (W- 535 X D- 560 mm) with new seats made of Ist class hard wood and including caning on wooden frame of size (40 X 20 mm) in Godrej pattern with 2 mm wide plastic cane and 4mm for border including applying two coats of French polish on exposed surfaces and fixing with 04 Nos of nuts and bolts complete all as specified and directed.

M&L with replacement of new 25 X 3 mm Flat iron 580 mm long, including necessary welding and fixing to the steel frame below the front and back rail of seat complete all as specified and directed.

M&L with replacement of unserviceable hand rest of chair CB with arms / Metal Chairs with arms non revolving and non adjustable with new handle of size 430 x 55 x 25 mm long made of 1st class (teak) wood duly polished with two coats of french polish complete all as specified and directed.

M&L with replacement of broken / damaged part 20 mm dia MS tube and S&F new 20 mm dia MS tube having wall thickness of 1.6 mm, as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing of serviceable parts and including applying two coats of olive green synthetic enamel paint over a coat of red oxide primer on replaced steel surfaces complete all as specified and directed

S&F with replacement of unserviceable 80 mm one No, GI nut and one No bolt as per drawing and all as per specified and directed. (Note : One no nut & one No bolt shall be considered in one unit "Each".)

S&F with replacement of unserviceable rubber stopper for 20 mm dia MS tube and all as specified and directed.

Repairs to " Office Table with Three drawers (Size 1200 X 600 mm) with prelaminated particle board Top equivalent to Drawing No : FD- 1004 and Table clerk steel (FD-1004) and replacement of components of following as shown in drawing complete all as specified and directed:-

M&L with replacement of old unserviceable top of size (1200 X 600) with new 18mm pre-laminated paritcale board top of OSD, exterior grade, one side teak wood finish & other side balancing white including polished 4 mm thick teak wood beading all roung the top of table as per drawing complete all as specified and directed:-.

M&L with replacement of a single drawer made of MS sheet of 20 gauge including apply of red oxide primer as per drg complete all as specified and directed.

M&L with replacement of new Stainless Steel Lock of 06 lever complete all as specified and directed.

M&L with replacement of but PVC Shoes (for 25 Sq mm Leg) with 1 mm thick 25 Sqmm MS plate complete all as specified and directed.

Repairs to "Office Table with Three drawers double Storage unit (Size 1500 X 900 mm) equivalent to Drawing No : FD-1002 table for senior officer and replacement of following components as shown in drawing complete all as specified and directed:-

M&L with replacement of old unserviceable top of size (1200 X 600) with new 18mm pre-laminated paritcale board top OSD, exterior grade, one side teak finished & other side balancing white including polished 4 mm thick teak wood beading all roung the top of table as per drawing complete all as specified and directed:-.

M&L with replacement of a single drawer made of MS sheet of 20 gauge and apply of coat of red oxide primer complete all as per exits in drawing as specified and directed.

M&L with replacement of new Stainless Steel Lock of 06 lever complete all as specified and directed.

M&L with replacement of PVC Shoes (for 25 Sq mm Leg) with 1 mm thick 25 Sqmm MS plate complete all as specified and directed.

Repairs to " Metal Shelving Racks of size 1875 X 900 X 500 mm adjustible type Drg No : HFD/20389)" and replacement of components of following as shown in drawing complete all as specified and directed:-

M&L with replacement of old unserviceable Shelf / Top / Bottom of size (960 X 560 mm) with new MS Sheet of 20 gauge as exists complete all as specified and directed.

M&L with replacement of 40 X 40 X 6 mm thick MS angle as per existing size with necessary removing and refixing with nuts and bolts of serviceable parts in place of unserviceable angles complete all as specified and directed.

Repairs to "Steel Shading Cabinet adjustible type W/O locker of size (1855 X 910 X 480) [ Equivalent to Almirah Steel Large with shelves (Drg No FD-1031)" & replacement of following components as shown on drg complete all as specified and directed :-

M&L with replacement of old unserviceable legs of Size (100 X 440 X 75mm) made of 1mm thick MS Sheet apply complete all as specified and directed.

M&L of 5mm long welding to damaged/decayed steel frame with arc welding as per std workmanship complete all as specified and directed.

M&L with replacement of Shelf of size (970 X 540mm) made of 20 Gauge MS Sheet with necessary welding as per std workmanship apply of red oxide primer complete all as specified and directed.

M&L with replacement of two way locking system with MS rod (with out Lock) complete all as specified and directed.

M&L with replacement of 150 mm long chromium plated mild steel handles complete all as specified and directed.

M&L with replacement of new Stainless Steel Lock of 06 lever (Godrej Pattern) complete all as specified and directed.

Repairs to "Steel Shading Cabinet adjustible type W/O locker of size (1155 X 760 X 480) Equivalent to Almirah Steel Small with shelves (Drg No FD-1032) " & replacement of following components as shown on drg complete all as specified and directed :-

M&L with replacement of old unserviceable legs of Size (100 X 440 X 75mm) made of 1mm thick MS Sheet apply of red oxide primer as per drawing complete all as specified and directed.

M&L 5mm long welding to damaged/decayed steel frame with arc welding as per std workmanship complete all as specified and directed.

M&L with replacement of Shelf of size (820 X 540mm) made of 20 Gauge MS Sheet with necessary welding as per std workmanship complete all as specified and directed.

M&L with replacement of two way locking system with MS rod (with out Lock) complete all as specified and directed.

M&L with replacement of 150 mm long chromium plated mild steel handles complete all as specified and directed.

M&L with replacement of new Stainless Steel Lock of 06 lever (Godrej Pattern) complete all as specified and directed.

Repairs to " Locker Steel ( 1100 x 760 x 600 mm) (Built in) (Equivalent to Drg No : FD-1029) " & replacement of following components as shown on drg complete all as specified and directed :-

M&L with replacement of old unserviceable legs of Size (100 X 440 X 75mm) made of 1mm thick MS Sheet apply red oxide primer as per drawing complete all as specified and directed.

M&L with replacement of 5mm long welding to damaged / decayed steel frame with arc welding as per std workmanship complete all as specified and directed.

M&L with replacement of back of size (1140 X 800 mm) made of 20 Gauge MS Sheet with necessary welding as per std workmanship complete all as specified and directed.

M&L with replacement of 100 mm long chromium plated mild steel handles complete all as specified and directed.

M&L with replacement of new Hasp and stapple chromium plated 75 X 40 X 3 mm complete all as specified and directed.

Repairs to " Side Rack with Tray (Steel) FD:-1023" and replacement of components as shown in drawing complete all as specified and directed:-

M&L with replacement of old unserviceable Shelf / Top / Bottom of size (370 X 860 mm) with new MS Sheet of 20 gauge as per existing shape & size complete all as specified and directed.

M&L with replacement of US 40 X 40 X 6 mm thick MS angle complete all as specified and directed.

M&L with replacement of 810 X 840 mm back MS Sheet of 20 Gauge complete all as specified and directed.

Repairs to " Stool Steel FD:- 409" and replacement of components as per following as shown in drawing complete all as specified and directed:-

M&L with replacement of old unserviceable Top of size (340 X 340 mm) with new MS Sheet of 20 gauge as per existing shape & size complete all as specified and directed.

M&L for replacements of Legs / Stiffner made of MS sheet 20 gauge as per drawing with necessary bending and welding including removing and refixing of serviceable parts and including applying of one coat of red oxide primer on replaced steel surfaces complete all as specified and directed.

Repairs to "Table with Drawer Steel 900 X 600 X 760 mm Drawing No : FD-1008" and replacement of components as per following & as shown in drawing complete all as specified and directed:-

M&L with replacement of old unserviceable top of size (900 X 600) with new 18mm pre-laminated paritcale board top OSD, exterior grade, one side teak wood finish & other side balancing white including polished 4 mm thick teak wood beading all roung the top of table as per drawing complete all as specified and directed.

M&L with replacement of a single drawer made of MS sheet of 20 gauge complete all as per exits in drawing as specified and directed.

M&L with replacement of new Stainless Steel Lock of 06 lever complete all as specified and directed.

M&L with replacement of PVC Shoes (for 25 Sq mm Leg) with 1 mm thick 25 Sqmm MS plate complete all as specified and directed.

Repairs to "Table without Drawer Steel 900 X 600 X 760 mm Drawing No : FD-1007" and replacement of components as per following & as shown in drawing complete all as specified and directed:-

M&L with replacement of old unserviceable top of size (900 X 600) with new 18mm pre-laminated paritcale board top OSD, exterior grade, one side teak wood finish & other side balancing white including polished 4 mm thick teak wood beading all roung the top of table as per drawing complete all as specified and directed.

M&L with replacement of PVC Shoes (for 25 Sq mm Leg) with 1 mm thick 25 Sqmm MS plate complete all as specified and directed.

Repairs to " Teapoy Varandha Steel (Drg No : FD- 383) " & replacement of following components all as per following & as shown on drg complete all as specified and directed :-

M&L with replacement of old unserviceable top of size (900 X 450) with new 18mm pre-laminated paritcale board top OSD, exterior grade, one side teak wood finish & other side balancing white including polished 4 mm thick teak wood beading all roung the top of table as per drawing complete all as specified and directed.

S&F with replacement of new 25 X 3 mm Flat iron including necessary welding and fixing as per drawing complete all as specified and directed.

Removing of broken / damaged part of steel furniture made of 20 mm dia MS tube and S&F new 20 mm dia MS tube having wall thickness of 1.6 mm, as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing of serviceable parts and including applying a coat of red oxide primer on replaced steel surfaces complete all as specified and directed

M&L with replacement of PVC Shoes (for 20 Sq mm Leg) with 1 mm thick 20 Sqmm MS Plate complete all as specified and directed.

Repairs to " Chair Varandha Steel (Drg No : FD- 259) " & replacement of following components as shown on drg complete all as specified and directed :-

Removing unserviceable Nylon Newar from both seat and back , M&L recanning to chair (Both seat and back) with 4mm wide 0.04 mm thick, Gola type half round plastic cane weighing not less than 12 Grams per 10 running meter weaved in mat pattern, as per Drg No: FD-259 or complete all as specified and directed.

M&L with replacement of PVC Shoes (for 20 Sq mm Leg) push type complete all as specified and directed.

Removing of broken / damaged part of steel furniture made of 20 mm dia MS tube and S&F new 20 mm dia MS tube having wall thickness of 1.6 mm, as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing of serviceable parts and including applying a coat of red oxide primer on replaced steel surfaces complete all as specified and directed

Repairs to " Bed Hard Steel (FD: E6/MAP/08/(R) " & replacement of following components as per following & as shown on drg complete all as specified and directed :-

M&L with replacement of old unserviceable 12 mm BWR ply of size (850 X 1974)mm including necessary fittings complete all as specified and directed.

M&L with replacement of Long 18 gauge MS rail of Size 1974 X 25 X 65 mm including powder coating complete all as specified and directed.

M&L with replacement of nuts and bolts for fixing of loosen Plywood with steel stiffener complete all as specified and directed.

M&L with replacement of 874 mm Long 18 gauge 25 Sqmm Stiffener including powder coating complete all as specified and directed.

M&L with replacement of 800 mm Long 18 gauge 38 Sqmm legs including powder coating complete all as specified and directed.

M&L with replacement of PVC Shoes (for 38 Sq mm Leg) including 1 mm thick 38 Sqmm MS plate complete all as specified and directed.

Repairs to " Charpoy with hard top (FD: ED/MAP-II/01)" & replacement of following components as per following & as shown on drg complete all as specified and directed :-

M&L with replacement of old unserviceable 12 mm BWR ply of size (838 X 1916)mm including necessary fittings complete all as specified and directed.

M&L with replacement of Long 18 gauge MS rail of Size 1974 X 25 X 65 mm including powder coating complete all as specified and directed.

M&L with replacement of nuts and bolts for fixing of loosen Plywood with steel stiffener complete all as specified and directed.

M&L with replacement of 874 mm Long 18 gauge 25 Sqmm Stiffener including powder coating complete all as specified and directed.

M&L with replacement of 400 mm Long 18 gauge 32 Sqmm legs including powder coating complete all as specified and directed.

M&L with replacement of PVC Shoes (for 32 Sq mm Leg) including 1 mm thick 32 Sqmm MS plate complete all as specified and directed.

Repairs to " Chair writing steel (FD: ED/E6/MAP/12) " & replacement of following components as per following & as shown on drg complete all as specified and directed :-

M&L with replacement of old unserviceable Hand rests as per drawing with necessary fittings complete all as specified and directed.

M&L with replacement of Rubber stopper for 25 X 10 mm cantilever type MS tube complete all as specified and directed.

SCH 'A' PART-II (REPAIRS TO WOODEN FURNITURE) Repairs to " Table Centre Drawing No FD- 274" & replacement of following components as per following & as shown on drg complete all as specified and directed :-

S & F replacement of old unserviceable with new Top ( 900 X 450 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick teakwood beading all round , all as per drawing complete all as specified and directed.

M&L with replacement of unserviceable Leg with 1st class teak wood leg of size (30 X 60 x 400 mm) complete all as specified and directed.

M&L with replacmeent of unserviceable long rail with 1st class teak wood long rail of size (20x50x850)mm, complete all as specified and directed.

All as per 17.02 above but short rail of size (20X 50 X 400) mm.

All as per 17.02 above but but side & center stiffener of size (20 X 50 X 400) mm

Repairs to "Chair Dining (Drg No : FD/MAP-II/05)" & replacement of following components as per following & as shown on drg complete all as specified and directed :-

S & F replacement of old unserviceable with new front leg of size (55x30x460mm) with 1st class seasoned teak wood complete all as specified and directed.

All as per Item No.18.01 above but rear leg of size 55 X 30 X 890 mm

All as per Item No 18.01above but side rail 30 X 65 X 430 mm

All as per Item No. 18.01 above but front rail of size 30 X 65 X 440 mm

All as per Item No.18.01 above but rear rail of size 30 X 65 X 405 mm

All as per Item No.18.01 above but back rest of size 45 X 35 X 405 mm

All as per Item No. 18.01 above but stiffener 20 X 25 X 430 mm

S & F for replacement of old unserviceable plastic cane of Dining Chair of any type with plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving as per Godrej pattern & complete all as specified and as directed.

Repairs to " Chair Easy (Drg No FD-229)" & replacement of following components as per following & as shown on drg complete all as specified and directed :-

S&F replacement of old unserviceable with new Front leg (55x30x460mm) made of 1st class seasoned teakwood, as per drg or as per existing shape and size complete all as specified and directed.

All as per Item No.19.01 above but rear leg 55 X 25 X 490 mm

All as per Item No.19.01 above but seat side rail of size 70 X 40 X 575 mm

All as per Item No.19.01 above but seat front side rail of size 50 X25X510 mm

All as per item No 19.01 above but Seat Back Side rail of size 55 X 25 X 510 mm

All as per Item No 19.01 above but back rest side rail of size 25 X 70 X 450 mm including supports of size 20 X 15 X 450 mm

All as per Item No 19.01 above but back rest lower / upper rail of size 55 X 40 X 510 mm

All as per Item No 19.01 above but rest for rail 50 X 25 X 510 mm

All as per item No 19.01 above but arm of size 65 X 25 X 610mm

S & F replacement of old unserviceable plastic cane of seat/back of Chair Easy of any type plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving at Godrej pattern complete all as specified and as directed.

Repairs to " Chair Writing (Drg No FD-280)" & replacement of following components as per following & as shown on drg complete all as specified and directed :-

Removing of old damaged front leg, S&F new front leg (30 X 55 X685) mm of 1st class seasoned teak wood complete all as specified and directed.

All as per Item No 20.01 but rear leg (30 X 55 X890) mm

All as per Item No 20.01but back rest rails ( 50 X 35 X 470) mm

All as per Item No 20.01 but seat side rail ( 30 X 65 X 470) mm

All as per Item No 20.01Do- but seat front rail (30 X 65 X 535) mm

All as per Item No 20.01Do- but seat back rail (30 X 65 X 470) mm

All as per Item No 20.01but stiffener (25 X 20 X 470) mm

All as per Item No 20.01 but hand rest ( 25 X 60 X 470) mm

S & F for replacement of old unserviceable plastic cane of seat of Chair Writing of any type plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving at Godrej pattern complete all as specified and as directed.

Repairs to " Table dining 6 person (Drg No FD/ MAP-II/03)" & replacement of following components as shown on drg complete all as specified and directed :-

S & F replacement of old unserviceable with new Top ( 1500 X 900 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick teakwood beading all roung , all as per drawing complete all as specified and directed.

M&L with replacement of leg with new leg of Size 90 X 45 X 750 mm of 1st class seasoned teak wood complete all as specified and directed.

All as per Item No 21.02 but long rail of size 90 X 45 X 1500 1st class seasoned teak wood

All as per Item No.21.02 above but S&F new short rail of size 90 X 45 X 900 mm 1st class seasoned teak wood

All as per Item No.21.02 above but S&F new Stiffner of size 90 X 25 X 900 mm 2nd class seasoned teak wood.

Repairs to " Table Peg (Drg No FD-384) " & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable with new Top ( 450 X 300 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick teakwood beading all roung , all as per drawing complete all as specified and directed.

M&L with replacement of old unserviceable leg with new leg of size 20 X 50 X 380 mm of 1st class seasoned teak wood complete all as specified and directed.

All as per Item No.22.02 but long rail of seasoned teak wood of size 20X40X450 mm.

All as per Item No.22.02 but new short rail / Bottom rail of seasoned teak wood of size 20X40X380 mm.

Repairs to " Teapoy (Drg No FD-382) " & replacement of following components as shown on drg complete all as specified and directed :-

S & F for replacement of old unserviceable with new Top ( 450 X 600 mm) of 18 mm thick pre-laminated praticale board OSD exterior grade one side teak woo decorative face and another side balancing white including 4 mm thick teakwood beading all roung , all as per drawing complete all as specified and directed.

M&L with replacement of unserviceable leg with new leg of 1st class seasoned teak wood of size 30x60x540 mm complete all as specified and directed.

All as per Item No.23.02 but long rail of seasoned teak wood of size 30x20x600 mm.

All as per Item No.23.02 but short rail of seasoned teak wood of size 20X30X450 mm.

All as per Item No.23.02 above but bottom rail of seasoned teak wood of size 20X30X450 mm.

Repairs to " Table bed side Wooden (Drg No FD-276) " & replacement of following components as shown on drg complete all as specified and directed :-

S&F for replacement of old unserviceable with new top or shelf of 18 mm thick pre laminated particle board one side decorative face and other side balancing white face OSD exterior grade of size 230 X 450 with 4mm teakwood beading (Front side) complete all as specified and directed.

All as per Item No.24.01 above but side of size (230 X 510) mm including 4 mm thick teakwood beading (Front side only) complete all as specified and directed.

All as per Item No.24.01 above but 06 mm BWR back ply of size (450 X 510) mm complete all as specified and directed.

Repairs to " Table dressing ladies with mirror (FD- 251, 378) " & replacement of following components as shown on drg complete all as specified and directed :-

S&F replacement of old unserviceable with new leg of size 45 x 45 x 140 mm of 1 st class seasoned teak wood table dressing as shown on drg complete all as specified and directed.

Supply , fixing & setting of 100 mm thick (40 density) foam cusion for each seat of Sofa set (FD-281,FD/MAP-II/02) with cover of tapestry cloth (Cloth costing min Rs 270/Mtr) of approved quality including white colour astra covering below cover, including removing old covers as per Drg complete all as specified and directed.

Supply , fixing & setting of cover of tapestry cloth (Cloth costing min Rs 270/ Running meter) of approved quality including white colour astra covering below cover for each seat of Sofa set (FD-281,FD/MAP-II/02), including removing old covers as per Drg complete all as specified and directed.

M&L replacement of 6 mm BWR ply to subject furniture as per drawing complete all as specifice and directed.

M&L replacement of 4mm ply BWR grade one side teak face to subject furniture as per drawing complete all as specifice and directed.

S&F replacement of old unserviceable with new brass hook for peg set/hat stand etc to subject furniture as per drg complete all as specified and directed.

M&L fixing of 4 mm th teak wood beading to exposed surface of 18 mm thick prelaminated particle board of subject furniture including polishing complete all as specified and directed.

M&L replacement of "Nylon Buffers " of Wooden furniture (Chair Dining, Chair Easy, Chair Writing, Teapoy, Table Centre, Table Peg, Table Bed side Wooden, Table dining, Table card ) including screws complete all as specified and directed.

M&L fixing of " Fancy Knobs " of subjected wooden furniture (Table Writing, Dressing Table etc) including screws complete all as specified and directed.

M&L fixing of " 75 mm fancy handels " of subjected wooden furniture ( Table Bed Side, Side Board and Bin Solid etc) including screws complete all as specified and directed.

M&L replacement of US part of steel furniture ( Tables ) made of 25 mm MS Square pipe of wall thickness 1.6 mm as applicable to subject furniture as per drawing with necessary bending and welding including removing and refixing of serviceable parts and including applying a coat of red oxide primer on replaced steel surfaces complete all as specified and directed.

M&L with removing old paint and dart from following steel furniture and apply one coats spray painting of synthetic enamel paint as per drg complete all as specified and directed :-

All as per Item No.36.00 above but Office Table with three drawers of size1200 X 600 mm with prelaminated particle board top/Table office clerk Steel (FD-1004)

All as per Item No.36.00 above but Office table with drawer double storage unit of size 1500 X 900 mm/ Table Office Officer (FD-1002)

All as per Item No.36.00 above but Metal Shelving Rack of size (1875 X 900 X 500 ) mm adjustible type (Trade Patern)

All as per Item No.36.00 above but "Steel shading cabinet (adjustible type) W/O lockers of size 1855 X 910 x 480 mm

All as per Item No.36.00 above but Steel shading cabinets (adjustible type) W/O lockers of size 1155 x 760 x 480 mm

All as per Item No.36.00 above but Stool steel 2' High (FD-409)

All as per Item No.36.00 above but Table 900X600 mm wtih Drawer, steel . (FD-1008)

All as per Item No.36.00 above but Table 900X600 mm with out Drawer, steel. (FD-1007)

All as per Item No.36.00 above but Metal Chairs With / With out arms non revolving and nontilting type equivalent to DRG No: FD-75 (M) and Chair CB Steel with/With out Arms (Drg No:- FD-75M)

All as per Item No.36.00 above but Chair Varandha Steel (Drg No : FD- 259)

M & L for French polishing to wooden furniture after removing the dirt and dust and including smoothing all the surface of exposed wooden portion by using sand paper including filling the pores / joints with putty wherever required all as specified and directed

All as per Item No.37.00 hear-in above but "Table Bed Side " (Drg No FD-276)

All as per Item No.37.00 hear-in above but Sofa Set four seater (FD-281, FD/MAP-II/02)

All as per Item No.37.00 hear-in above but Sofa Set five seater (FD-281, FD/MAP-II/02)

All as per Item No.37.00 hear-in above but Bin solid Multi Purpose (FD: E6/MAP/09R)

All as per Item No.37.00 hear-in above but Book Shelf Large (FD-356)

All as per Item No.37.00 hear-in above but Table Dining Six Pers (Drg No FD/ MAP-II/03)

All as per Item No.37.00 hear-in above but Table Centre (Drg No FD-274)

All as per Item No.37.00 hear-in above but Table Dining eight pers (Drg No FD/MAP-II/03)

All as per Item No.37.00 hear-in above but Chair Dining long back (FD-357)

All as per Item No.37.00 hear-in above but Table Writing (FD-275)

All as per Item No.37.00 hear-in above but Table Dressing Ladies (FD- 251, 378, FD/E6/MAP-II/07)

All as per Item No.37.00 hear-in above but Chair easy (FD-229)

All as per Item No.37.00 hear-in above but Chair writing (FD-280)

All as per Item No.37.00 hear-in above but Chair Dining (Drg No : FD/MAP-II/05)

All as per Item No.37.00 hear-in above but Hat Stand with Mirror (Drg No FD-233)

All as per Item No.37.00 hear-in above but Mirror with Shelf (FD-52 (M))

All as per Item No.37.00 hear-in above but Peg set of six (FD-80)

All as per Item No.37.00 hear-in above but Peg Set of three (FD-80)

All as per Item No.37.00 hear-in above but Peg Table (Drg No FD-384)

All as per Item No.37.00 hear-in above but Tea poy (FD-382)

All as per Item No.37.00 hear-in above but Table card ( FD- 352)

All as per Item No.37.00 hear-in above but Stool dressing (FD-282)

All as per Item No.37.00 hear-in above but Side board (FD-1112)

All as per Item No.37.00 hear-in above but Notice board size 1.83 x 1.22 (FD-99 R)

All as per Item No.37.00 hear-in above but Notice board size 1.22 x 0.9 (FD-99 R)

All as per Item No.37.00 hear-in above but Notice board size 2.44 x 1.22 (FD-99 R)

ARIN AND COMPANY