Restoration of rain damages WSS Alsu Kangoo Dehar Tehsil Sundernagar Distt. Mandi H.P.

Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming / dressing of sidesand bed stacking the excavatted soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth , sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:1.5:3 (one cement :one and half sand : three graded crushed stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement in all leads and lifts in:- Walls any thickness but not less than 0.1 mtrs. thickness attached pillasters, plinths and string courses etc.from top of foundation level upto floor two level including all leads and lifts .

Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs. and removal of the same for in-situ reinforced concrete and plain concrete work including all leads and lifts. Vertical surface such as walls(any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like

Boulder filling dry hand packed tightly under floors complete in all respect in all leads and lifts.

Providing and laying cement concrete 1:3:6(1cement :3 sand: 6graded crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in retaining wall/ breast wall complete in all respect and as Per direction and to the entire satisfaction of the Engineer-in-charge.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level including all leads and lifts

Providing and fixing pressed steel door fames conforming to IS: 4351 manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle three hold of mild steel angle of sction 50X25mm, or baseties of 1.60 mm pressed mild steel welded orrigidly fixed together by mechanical means, including M.S pressed butt hinges 1.5mm thick with mortar guards, lock strike-plate and shock absobers as specified and applying a coat of approved steel primer after pre-treatment of the surgfaces directed by Engineer-in-charge.

Providing and fixing panneled glazed or panelled and glazed shutters for door, windows and clerestory windows, including black enamelled iron butt hinges with necessary screws 45mm thick 2nd class deodar wood.

Providing 40X3mm flat iron hold fast 40cm long i/c fixing to frame with 10mm dia nut & bolts and wooden plug and embaedding in CC block