GE/863/EWS-T-36 OF 2021-22

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified & directed.

Earth filling under floors including spreading and levelling in layers n. exc. 25cm thick and well ramming including watering complete all as specified and directed .

Returning filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed.

Removal of surplus soil to a distance n.exc 50 m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed.

M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate for foundation filling, mass concrete and sub base of floors complete all as specified & directed.

M&L for reinforced cement concrete 1:1 ½ :3 (Nominal Mix) type B1 using 20mm graded stone aggregate as in foundation including, raft footings, foundation beams, bases of columns, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete 1:1 ½ :3 (Nominal Mix) type B1 using 20mm graded stone aggregate as in columns, posts, struts, etc complete all as specified and directed.

M&L for reinforced cement concrete 1:1 ½ :3 (Nominal Mix) type B1 using 20mm graded stone aggregate as in beams, plinth beam, lintels over 1.50m span, siesmic and similar bands including necessary formwork complete all as specified and directed.

M&L for reinforced cement concrete 1:1 ½ :3 (Nominal Mix) type B1 using 20mm graded stone aggregate as in lintel bands chajjas, lintels upto 1.5 metre span including necessary formwork complete all as specified & directed .

M&L for Form work to sides of concrete foundations,footing,raft and raft beams,sides and soffit (if any) of foundation and plinth beams: and similar works vertical or to batter for rough finished surfaces of concrete complete all as specified & directed.

M&L for Form work to sides and soffits of flat floor and roof beams, beam haunchings, girders, bressumers, lintels, cantilivers, shelves incl sup ports, overhangs, etc. also splays between floors and beams etc with rough finish surfaces of concrete complete all as specified & directed.

M&L for Form work to sides of pillars, column, post, struts, piers, stanchions with rough finished, square, rectangular or polygonal concrete surfaces complete all as specified & directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed.

M&L for TMT bars 6 to 8mm dia cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed.

All as per item No. 14 here-in-before but 5mm dia and over upto and including 10mm dia bars as in sturrups, nibs etc.

M&L for 1:3:6 type C-2 precast cement concrete (20mm graded stone aggregate) block masonary with solid blocks exc 10 cm in width and not exc 20cm in width and setting in cement mortar 1:6 complete all as specified & directed.

M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4 complete all as specified & directed.

M&L for rendering 10mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified & directed.

M&L for 15mm thick rendering on wall or concrete surface in cement mortar 1:4 finished even and fair complete all as specified & directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for preparing newly plastered or pointed surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified & directed.

S&F Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250) Quality-A) complete all as specified & directed.

S&F rolled Mild steel plates plain square cot or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-410-W(Gde E-250) Quality-A) complete all as specified & directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour, PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified & directed.

S&F factory made solid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width, stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified & directed.

M&L for 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified & directed.

S&F butt hinges, 100 mm medium weight, cold rolled mild steel complete all as specified & directed.

S&F 125mm aluminium handles, cast type ,anodised and pattern/design as approved complete all as specified & directed.

S&F steel windows or steel ventilators fixed type with glazing bar complete all as specified & directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n,exc 0.5 Sqm, each pane complete all as specified & directed.

Supply & fixing, galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified & directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

M&L for 25 mm thick levelling course in Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) complete all as specified & directed.

M&L for Non - skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 Sqm, in floors, etc set and jointed in neat cement slury & pointed in coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for Glazed ceramic coloured tiles (300x200mm) x 6-7mm thick on vertical surfaces as in skirting/dado, set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.

M&L hard core of broken stone of gauge n. exc. 63mm; deposited, spread and levelled in layers n. exc. 15cm thick watered and rammed to true surface complete all as specified and directed.

M&L for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in floor, plinth protection etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L for chequered cement concrete tiles 30cmx 30cmx 15mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 15mm thick screed in cement mortar 1:6 complete all as specified & directed.

Supply & fixing steel water tubes of size 15mm bore (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors/ concealed in walls complete, all as specified & directed.

Supply & fixing steel water tubes of size 20mm bore (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors/ concealed in walls complete, all as specified & directed .

Supply & fixing stop valve cast copper alloy, chromium plated, with capstan head screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or brass ferrule 15mm bore complete all as specified & directed.

S&F Vitreous china squatting pan 'Orissa pattern' size 580X 440 mm white with integral foot rest (exluding flushing cistern and flush pipe) including connection to trap,concrete and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified & directed.

S&F vitreous china wash down water closet pan (pedestal pattern) white with trap (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe etc, including plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

Supply & fixing 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, PVC connection 450mm long including brackets and 32mm dia flush pipe complete all as specified and directed.

Supply & fixing vitreous china wash basin, white, flat back of size 550mm x 400mm including 32mm dia PVC flush pipe with coupling and set of brackets including 15mm bore pillar tap fancy type cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule incl PVC connections 15mm size with PTMT nuts of legth 450mm complete all as specified and directed.

S&F stop valves 15mm (Concealed type), cast copper alloy, fancy type, chromium plated, screwed down, high pressure with long shank and cup etc complete all as specified & directed.

S&F shower roses, brass, chromium plated with or without swivel joints 125mm size incl fixing to steel pipe complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, 60cm long between flange including brackets complete all as specified & directed.

S&F 75mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints,fixed vetically on wall complete all as specified & directed.

S&F 75mm bore PVC (SWR) vent cowls complete all as specified & directed.

S&F 110mm bore (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed

S&F PVC (SWR) floor traps 75mm bore and jointing to waste pipe in solvent cement alongwith CP grating complete all as specified & directed.

Supply & fixing 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted incl ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20mm bore and fixed in position complete, all as specified & directed .

S & F gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed to 20 mm bore GI Pipe complette all as specified and as directed.

S& F MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or Fe 165 complete all as specified and as directed.

S&F 15mm bore bib tap Chromium Plated fancy type cast copper alloy with crutch or butterfly hadle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

M&L for PCC 1:2:4 type B1, 20mm graded stone aggregate as in surface channels and drains complete all as specified and as directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in bed to drain pipe, incl packing under and haunching against the sides of pipe of 150mm bore after they are laid and tested complete all as specified and as directed.

M&L for 150mm internal dia reinforced cement concerete pipes, class NP2, laid and jointed complete with collars and jointed complete all as specified and as directed.

M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone agg as in cover slab and like,set in cement mortar 1:4 incl necessary form work complete all as specified and as directed.

M&L for 15mm thick rendering on wall or concrete surface in cement mortar 1:4 finished even and fair using water proofing compound complete all as specified and as directed. Note: WPC shall be measured and paid seperatly under respective item.

Supply only water proofing compound (WPC) complete all as specified and as directed.

M&L for Construction of 20 users Septic tank to carry sewage and sullage water, complete all as specified and shown in Drg No. STD 1320 (C) Sheet 1/3 to 3/3 of Chief Engineer Chandigarh Zone and directed. Note:- (a) Excavation and earth work shall be in any type of soil. (b) Precast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) block masonry with solid blocks, set in CM 1:4 shall be used in walls in lieu of Brick masonary as shown in drawings. (c ) The width of Precast cement concrete (20mm graded stone aggregate ) type C-1 block masonry in walls shall be as 700 / 600 / 500 / 400 mm in lieu of width of Brick masonary 690 / 575 / 460 / 345 mm respectively as shown in drawings. (d) RCC work where ever shown in drawings as in base slab, baffle walls , Vent shaft, manhole openings with cover connection, roof slab etc . shall be M-25 Design mix, type B1 using 20 mm graded stone aggregate. (e) The cost of all above provisions and other provisions as shown in drawings shall be deemed to be included in quoted rates of this item and nothing extra shall be entertained on this account.

M&L for Construction of Soakage well 1.80 m dia and 3.0 m effective depth complete all as specified and shown in Drg No. STD 1173 (C) Sheet 1R/2 of Chief Engineer Chandigarh Zone and as directed. NOTE:- (a) Excavation and earth work shall be in any type of soil. (b) foundation in PCC 1:3:6 type C2 using 40 mm graded stone aggregate. (c) Honey combing brick walls masonry as shown in drawing. (d) RCC work where ever shown in drawings shall be 1:1 ½ :3 (Nominal Mix) type B1 using 20 mm graded stone aggregate (e) The cost of all above provisions and other provisions as shown in drawings shall be deemed to be included in quoted rates of this item and nothing extra shall be entertained on this account.

M&L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded ,1100 volts grade copper conductor cable, unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl FRLS PVC conealed conduit medium grade with accessories having fixed on wall / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylum laminated sheet on top for fixing switches sockets etc, for one light point / fan / Bell point controlled by one switch complete all as specified and directed.

All as per item no. 71 here-in-before but One 3 pin socket outlet, 5 amps, independent, with cables 1.5 sqmm size complete.

All as per item no. 71 here-in-before but One power point Wiring with PVC single core sheathed copper conductor cables 2.5 sq mm size FRLS.

Supply and fixing LED light fittings 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

M & L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten / angle fittings with and including 7 Watts LED lamp complete all as specified and as directed.

Supply and fixing Switch piano, flush type single pole, one way 5 Amp complete all as specified and as directed.

Supply and fixing Switch piano, flush type single pole, one way 16 Amp complete all as specified and as directed.

Supply and fixing Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and as directed.

Supply and fixing Socket outlet 2 in 1, 3 pin, 5A complete all as specified and as directed.

Supply and fixing miniature circuit breaker (MCB) SPN 32 AMP rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing Sheet metal enclosure for DBs 8 way, double door, 240 Volt, with 200 Amps rates bus bar complete all as specified and as directed.

Supply and fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and as directed.

S&F exhaust fan, steel body , heavy duty, AC, Single Phase 300mm sweep, with louvres complete all as specified and directed .

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I,connected to earthing test point all as specified or indicated including testing on completion ,necessary excavation, earthwork, PCC works in 1:2:4 type B-1, form work and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs, GI Pipe of 15 mm dia of light grade for protection of earth wire including taking out old earthing complete all as specified and directed.

M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for Old size Bricks; common burnt clay building bricks, sub-class ‘B’ designation 75 complete all as specified and directed.

M & L for Tubes, 'light grade' 50 mm dia, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

R B TRADERS

A P ENTERPRISES