HPSEBL/CEOCZ/MM/NIT-17/2021-22

Amount

11/04KV, 2MVA Sub-Station

Distribution Transformer (outdoor Type) 11/0.4KV,2MVA

Steel pole 13mtr long with base plate

RCC muff 2 mtr long with concrere filling

M.S Channel Iron X- Arm (100X50XX6mm),Length:2800mm

M.S Channel Iron X- Arm (1600X100X50X6mm)

M.S Channel Iron (4000X100X50X6mm)

M.S Channel Iron X- Arm (3000X100X50X5mm) for supporting LT Cable

X-arm C.I.(75X40XX6mm),Length:2800mmX4Nos. For supporting DO fuse unit & GOSwitch

Angle Iron (16000X50X50X6mm)For LA

Angle Iron (4000X50X50X6mm)

MS Angle Iron (1500X50X6mm),. For supporting LT cable

M.S Angle Iron (50X50X6mm),length:2800mm.for Las

GO Switch unit(11KV,400A,25KA)

DO Fuse unit

Surge Arrester 9KV,10KA Station Class (Porclain type)

11KV Isolator 630Amp,25KA without earth switch

Disc Insulator with complete fittings(porclain type)

11KV Pin Insulator(porclain Type)

11 KV Stay Set complete with Helical Fitting & Guy assemblly

Stay Wire 7/3.15mm2(6Kg/ set)

Sub-station Pipe earthing Set Complete with GI,Charcoal and Salt etc.

Full Clamp made up of MS Flat 50X6mm

Half clamp

PG clamp 7/4.26mm2

Nuts & Bolts Off Sizes

Alluminium Thimble (Off Size)

Alluminium Thimble (Main Cable Size 1000mm)

Danger plate(250X200X1.6mm)

Supply erection,testing and commissioning of outdoor type distribution (Incoming Feeder) 2000A 4P 50KA MDO ACB with M.P. based ET6.0A Release i.e. O/L, S/C , Instantaneous & E/F Prot. ON/OFF INDICATION LAMP,06A SP 10kA MCB - For Control "C" Curve,2000/5A, 15VA Cl-1.0, Current Transformer - Resin Cast - MET.Phase Indicating Lamps R-Y-B 220V AC - LED Type (set),C.T. Shorting Links, Neutral Link, and 3 No outgoing feeders with 2Nos MCCB of 1250A, 3P, 50kA & 1Nos 800A, 3P, 50kA, all MCCBs be Thermal Magnatic Rel O/L, S/C Pro.(outgoing feeder), Rotary Operating Handle,Spreader Links & Phase Barriers (Set), 2000A TPN Copper Bus Bars - Electrolytic Grade E-91E grade,AL. Horizontal, Vertical, Input & Output Links of SWG,Bus Bar Supports, Colour Coded PVC Heat Shrinkable Sleeves,Earth Bus across the width of the panel, (Enclosure and accessories)MS Cabinet (2/1.6mm - CR-2 D-Grade) with Base Frame,MS Cabinet (2/1.6mm - CR-2 D-Grade) with Base Frame,Mounting Plates, MS Channels, Partitions & Gland Plates - 3mm,EPOXY Powder Coated Paint after Seven Tank Pre-treatment Process,Hardware and Accessories - Nuts, Bolts, Washers - Plain & Spring,Door Hinges (Aluminium Die Cast), Steel Door Locks,Neoprene Rubber Gaskets -"D" Type, Rubber Gromet,Transparent Polycarbonate Sheet for covering live parts + Fly Nut + Handle,"I" Lifting Hooks with Plain & Spring Washer and Bolts,Inscription Name Plates, Danger Plates, Legends, Lock / Unlock StickerBraded Copper Wires for Feeders Door Eathing with Thimbles

LT armoured Cable single core 1000mm2

End termination Kit for LT cable 1000mm2, Single core of Densons/3-M Mehendra/Rechym/L&T make

Aluminium paint

AAAC7/4.26mm2 for jumpering &busbar

11KV SINGLE CIRCUIT HT LINE

ACSR6/1/4.72mm2(includes 3cond lengths for 3-PH and additional 1% (Sag,Jumpering and wastage)

Steel Tubular pole 13mtr Long with base plate

RCC muff 2 mtr long with concrere filling

Belts Set MS angle iron 50X50X6,length (1500mm)X2nos

X-Bracing Set MS Angle iron :50X50X6mm,length 2140mmX(run thro:10*3)+dead 3X2X3))No.

X-arm(horizontal) MS -channel iron 100X50X6,length(2140X(run thro:10X3)+(dead:3X2X3)No.

Disc insulator sets (Porclain ,12KV,90KN)i/c dead end clamp complete fittings

11KV Pin insulator(porclain ,12KV,10KN)

HT stay Set/Guy arrangement 4no./structure

Stay wire 7/3.15mm,6Kg/Stay set

11 KV Earthing set Complete with GI,Charcoal and Salt

Singlecontinuous earth wire (GI 8SWG a/w wire lengths avg. one road crossing @20mtr and 1%add Sag +wastage)

Cross lace (G.I 8SWG)(2.2mX9nos.@2mtr spacing)

Eye hook for earth wire

Earth wire clamp

M.S Angle (50X50X6),length 2210mm for road crossing,4Nos.

Half Clamp (run thro str),6nos.

Full clamp(on dead end structure :10nos,run thro str :4No.

Danger Plate(250X200X1.6mm)

Barbed wire

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Alluminium paint

3PHASE LT LINE

ACSR6/1/4.72mm2 i/c 1% sagg, jumpering waste

Steel pole 9mtr long a/w base plate

RCC Muff 2mtr long with concrete filling

Angle iron (75X75X6) length1.5mtr

Shackle insulator (16KN)

D-Iron

Earth Knob

LT Stay Set

Stay wire 7/3.15mm2@6Kg/set

Full clamp

Half clamp

Earthing set complete

Earth wire 8SWG

Spool tie

Nuts & Bolts off Size

Alluminium paint

Spiral PVC spacer

LT Armoud Cable Single Core 1000mm2

Alluminium thimble1000mm2

End termination Kit for LT cable 1000mm2, Single core of Densons/3-M Mehendra/Rechym/L&T make

LT cable supporting MS channel (3000mm)long(100X50X6mm)*6Nos.

LT Cable supporting MS Channel (1500mm)long (75X40X6)mm*9Nos.

Back Clamp for cable support

CIVIL WORK

Transformer Bed (Civil work (as per HPSR) (4 Jobs)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Finishing walls with water proofing cement paint ofrequired shade New work (Two or more coats applied @ 3.84 kg/10 sqm)

Chain link fencing,Angle iron ,Gate etc. for DTR fencing (4 Jobs)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Centering and shuttering including strutting, propping etc. and removal of form for

Edges of slabs and breaks in floors and walls under 20 cm wide

Stone soling properly hand packed

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

Providing and fixing gate handle, nuts, bolts, hings and other accessories as required complete as per the direction of Engineer-in-charge

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture.

Ashoka Electronics and Electrical industries

mohd anwar