REPAIRS TO PLINTH PROTECTION SAUCER DRAINS GULLY TRAPS AND 1ST MANHOLE INCL CONNECTED PIPELINES IN MD ACCNS AT INF LINE AND BG LINE UNDER AGE (I) JAMNAGAR

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 75mm thick PCC type C-2, 1:3:6 (40mm graded stone aggt) as in path, plinth protection, etc., complete all as specified and as directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A

M&L Lacquer coated coloured chequered cement concrete tiles 300 x 300mm x 25mm thick set, jointed and pointed in neat slurry in floors with grey cement and pigments over and incl 15mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster 1:4 all as specified and as directed.

S&F Machine pressed precast conctete, M-35 grade, interlocking paver block 60 mm thick rubber moulded of reqd size laid dry over 50mm thick sand cushing complete all as specified.

M&L Machine pressed Precast cement concrete block masonry solid blocks of type B-1, 1:2:4 (using 20mm graded stone aggregate), exc 10cm in width and setting in CM 1:6 as in kerb stones complete all as specified and as directed.

Demolition of Stone boulder masonry built in Cement mortar all as specified and as directed.

M&L for walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 all as specified and as directed.

All as per item No 05 above but except stone all as specified and as directed. (Material shall be obtained from item No 01 above)

M&L 20mm thick rendering on stone masonry walls in cement plaster 1:4 incl finished even and smooth w/o using extra cement all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for PCC type C2 (1:3:6) using 40 mm graded stone aggregate) as in surface channels and drain.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds mitered/stopped ends etc..

Formwork for fair finished surfaces to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S&F 1mm thick Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges, 150mm dia complete all as specified and as directed.

S&F 1mm thick Mild steel sheet galvanised class 3, half round with rounded edges, 150mm dia, angles for eaves gutters or nozzle pieces complete all as specified and as directed.

S&F 1mm thick Mild steel sheet galvanised class 3, stop ends for half round with rounded edges, 150mm dia eaves gutters complete all as specified and as directed.

S&F Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia pipe complete.

Demolition and breaking up 100mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

S&F in repairs 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors

S&F in repairs PVC bends any radius 75 mm dia

S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubberring joints, laid in trenches or in floors

S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls

S&F PVC bends any radius 100 mm dia

S&F in repairs Salt-glazed stoneware gully traps, square or round mouthed, type 'P', size 150mm x 100mm incl setting and jointing to drains with cement mortar 1:1complete all as specified.

M&L Cement concrete bed in cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) to 100mm dia drain pipes including forming cradles complete

M&L Cement concrete in cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) to 100mm dia to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L Precast cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in manhole covers and set in cement mortar 1:6 including necessary forms, moulds, etc complete all as specified and as directed.

M&L mild steel TMT Bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed not less that 0.90 mm dia or securing with chip).

Demolition of precast concrete block walling built in cement mortar all as specified.

M&L Precast cement concrete block masonry with solid blocks of type C-1, 1:3:6 (using 20mm graded stone aggregate), exc 10cm in width and setting in CM 1:6 complete all as specified and as directed.

M&L 15mm thick rendering on brick or block concrete masonry walls in cement plaster 1:4 with WPC in appropriate proportion as per manufacturer instruction incl finished even and smooth w/o using extra cement all as specified.

M&L 15mm thick rendering on brick or block concrete masonry walls in cement plaster 1:4 incl finished even and smooth w/o using extra cement all as specified.

Supply only integral waterproofing compound

Dismantling Mild Steel works of any description and all as specified.

S&F rolled section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angles cleats or other connecting plates in Fe410-W (Gde-E - 250) quality A.

M&L preparation of newly steel surfaces of any description n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide.

S&F MS flat iron as in Bands, straps, supports or stays for eaves board/facia etc. complete all as specified and as directed.

Quick Building Service

MAYUR ENTERPRISE