Supply Of Materials For MGNREGS Works

Amount

Supply materials for works

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate (20 mm nominal size)

Stone Aggregate (20 mm nominal size)

Stone Aggregate (20 mm nominal size)

Stone Aggregate (10 mm nominal size)

Stone Aggregate (10 mm nominal size)

Stone Aggregate (10 mm nominal size)

Coarse sand(zone III)

Coarse sand(zone III)

Portland Cement(ISI marked, as per market rate during material supply)

Quarry waste

Interlocking C.C Paver Block (80 mm thick, M-30)

Stone Aggregate(single size):06 mm nominal size

Second class kail wood in planks

Second class kail wood in scantling

Safeda ballies 125 mm diameter

Boulder 50 mm to 200 mm

Gravel 5 mm to 10 mm

Gravel 1.5 mm to 2 mm

PVC pipe 63 mm outer dia . 6kgf/cm2

PVC bend 63 mm dia

Average rate of mild steel round bars for reinforcements

Stone for masonry work

Through and bond stone size 24 x 24 x 39cm

Solid blocks of size 40x20x20cm

Solid blocks of size 40x20x10cm

Twisted steel/deformed bars

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable span ESO+SI (2.35-3.40)

Adjustable telescopic prop 3 m (2.02-3.75m)

Wall form panel 1250x500 mm

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Beam clamp 300-380 mm (450-1070 mm)

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Fine sand (zone IV)

Aluminium T or L Sections

Chromium plated Brass screws 20 mm

Powder coating 50 microns on aluminium sections

Anodised Aluminium butt hinges 100x75x4 mm

Neoprene / EPDM rubber gasket

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Stainless steel (S S 304 grade) adjustable friction window stay 255 x 19 mm

Stainless steal screws 30 x 4 mm

Aluminium casement window fastener (powder coated )

Stainless steel screws 25 mm x 4 mm

48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish

24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish

Mild steel sheets for tanks

Iron pintels including weldded pin

Mild steel sheets with bolts and nuts to rest on pintels

Mild steel hook

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc.

PVC pipe 32 mm outer dia 6Kgf/cm2

PVC pipe 20 mm outer dia 12 kgf/cm2

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Flats up to 10 mm in thickness

Oxidised mild steel tower bolt (barrel type) 200x10 mm

Oxidised mild steel screws 30 mm

Oxidised mild steel handles 125 mm

Oxidised mild steel screws 25 mm

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50cm or concealed suitably and with 1.00sqmm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Shortpoint

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliantmodularaccessories).Singlecontrollightpointwithoutceilingrose-Short point

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, includingprovidingswitchboardmainandcontinuousearthingwithNo.14SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/solderingetccompletewithsuitablesizemodulartypemetalswitchboxes,modular type front plates (white) etc. up to and including 6A modular type SP switches and makinggoodthesurfaceofwall,colourwashingetc.complete.Alltheterminations intheswitchboardsandDB'sshallbetinnedandthewiresshallbedrawnandfixed alongtheperipheryoftheboxusingsuitableties,tiemountsetcasrequired.(RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points

Supplying and fixing suitable size GI box with modular plate and cover in front on surfaceorinrecess,includingprovidingandfixing6pin5/6&15/16ampsmodular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing suitable size Gl box with modular plate and cover in front on surfaceorinrecess,includingprovidngandfixing2Nos.3pin5/6Amodularsocket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing PVC batten/ angle holder including connection etc. as required.

Supply and fixing PVC waterproof bulk head fitting with prismatic glass cover suitable for 9 W CFL to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISSorextendingtheoriginalwiringand making good the surface as required.

Supply and providing the following types and power rated lamps in the existing fittings as required.B22 LED bulb 9W

Supply conveyance, installation, testing and commissioning the light fittings of followingtypesmadeofpolycarbonatematerial,CRI>80,ColourTemperature: 6500 K, Luminous efficiency>=100 lm / W directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required.1200 mm 36-40 W LED Batten

Supply, Installation, testing and commissioning of ceiling fan of following sizes includingwiringthedownrodsofstandardlength(upto30cm)with1.5sq.mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - BLDC ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt),Airdeliveryminimum210(cubicmeter/minute),Copperwinding suitable for 230V/240V single phase AC supply

Supplying and fixing of following sizes of medium class PVC conduit along with accessoriesinsurface/recessincludingcuttingthewallandmakinggoodthesamein case of recessed conduit as required.20 mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, singlecorecableintheexistingsurface/recessedsteel/PVCconduitasrequired.3X 1.5 sq.mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, singlecorecableintheexistingsurface/recessedsteel/PVCconduitasrequired.3x 2.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, singlecorecableintheexistingsurface/recessedsteel/PVCconduitasrequired.3x 4 sq. mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distributionboard,240V,onsurface/recess,completewithtinnedcopperbusbar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuitbreakersuitableforinductiveloadoffollowingpolesintheexistingMCBDB complete with connections, testing and commissioning etc. as required.Single pole

Supplyingandfixingfollowingrating,doublepole,240volts,isolatorintheexisting MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supplyingandfixingfollowingrating,doublepole,(singlephaseandneutral),240 volts, residual currentcircuitbreaker(RCCB),havingasensitivitycurrentupto300milliamperesin the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

EarthingwithG.I.earthpipe3metrelong,40mmdiaincludingaccessories,and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Supply and drawing bare earthing conductors of the following sizes along with wiring/cablesandgivingconnectionasrequired3.15mmcopperconductor(10 SWG)

Supplyofsuperiorqualitycopperearthsocketforthefollowingsizeofearth conductor including crimping etc. as required.3.15 mm (10 SWG)

Fabrication,supply,conveyance,installationtestingandcommissioningofflooror wallmounting,dustandverminproof,cubicletypeMVpanelboardcomprisingof the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly asperform4ofIS8623(withlatestamendments)usingCRCAsheetasperapproved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding,shroudingetc.SupplyandfabricationofMVpanelboardusing1.6mmCRCA sheet, powder coated (excluding base frame)

Supplyandfixing32A,2Wayneutrallinksmountedon DMC/SMC base

Supplyingandfixing32A,HRCBakeliteFusefittingswithHRC Fuse link with connections, in existing meter board

LS amount for Remuneration and Supervision charge

S.REGHU (BID ID -2256123)

SIBIN B S (BID ID -2256183)