LWSS Silh Gagruhi submersible pump 7 50 HP tube well 1

Supply of Horizontal Spindle, horizontal split casing single/multistage mono submersible pump (1 set of 7.50 HP) of standarad make such as KSB/Mathur & Platt/Ground/Kirloskar confirming to BIS 1520-1980 (Upto date ammendments) read with BIS 9137-1978 or latest to handdle clear turnidity 50ppm. with impellers, casing ring & shaft sleeves of brnze, shaft of steel CI casing of suitable capacity coupled directly through a flwxible coupling on a commonbase plate to kirloskar/NGEF/Crompton Jyoti slip ring/squirrel cage screen protected drip proof induction electric motor suitable for operation on the data given below :-

Capacity of each Pump set Discharge:-=3.00 LPS

Total Head = 95.00 Mtrs.

Dia of Rising main =65mm dia.

Supply of Suitable direct oon line/oil immersed star delta /ATS/Stator rotor starter of standard make such as MEI/Kilburn/Jyoti/Siemens/Larson & Tubro conforming yo BIS 8544-19979 latest with upto date ammendments for squirrel cage/slip-ring motor(make to be specified by the tenderes) mounted on pannel board with magnetic type over load release & dashpot time lag under voltage relase with initial oil fiolling 7.50 HP complete in all respect.

providing and fixing of CI sluice valve of BIR/ KARTAR make(with hand wheel) as per IS: 780-1984 class-I upto 300mm dia(I/c brass spindle & as per 2906-1984 class-II for dia.300mm ) complete with bolts nuts, ruber insertion etc.(the tail piece if required shall be measured & paid for separately) complete in all respect as er the entire satisfaction of Engineer in charge 65mm dia

Providing and fixing double flanged cast steel non return valve Kirloskar/BIR make having bye pass arrangement for rising main including flange table-17 gasket nut bolts and welding in two layers and capable of with standby nominal seat pressure 21.00Kg/cum and as per IS: 1868/API-600 class-ASA-150 with upto date ammendment with in all lead & lifts complete in all respect. 65mm dia

Providing, fixing and jointing copper PVC insulated 3 core armoured submersible power cable (One cable carrying all the three phases) of suitable size and capacity to motor and all other electrical equipment as per IS:1554(P-I) 1988 or latest with upto date ammendment of finloex, make only(15HP submersible motor) including all leads and lifts and carriage of material at site and as per direction of the Engineer in charge 6mm2 complete in all respect

Erraction charge for all items Sr No. 1,2,3,4 & 5 including cost of tee bends tapers and any other fitting with flange required as per dite condition & as per direction of Engineer in charge.