PROVISION OF CONSULTANCY SERVICES FOR DESIGN OF INTEGRATED BUILDING FOR COMNETCEN (K) AND MOC (K) AT NAVAL BASE KOCHI

Amount

Complete consultancy services as undermentioned for buildings given below:- Design and preparation of Architechtural drawing , structural drawings, design of services and bill of quantities for building and internal and external services for Integrated building for Comnetcen (K) and MOC (K) at Naval Base Kochi, Stilt Parking,Office Accn, Oprator room, lift, meter room including core area ,RCC water tanks at terrace etc. with areas and capacities as given below: - (i) Total plinth area– 5788.20sqm (ii) Pump house for water supply & fire fighting – 50sqm (iii) RCC UG sump for water supply & fire fighting – 100000litre (iv) AC Plant room and Gen room - 360.75 Sqm (v) Construction of battery charging room-231.25 Sqm (vi) Water tank on roof -25000litre (vii) Construction of covered shed for MT-132.05 Sqm (viii) Construction of MT store -55.50 Sqm (ix) Arial Park (x) Naval Signal Station (xi) Incinerator (xii) Substation room (xii)Stand by power supply) (xiii) Perimeter wall (xiv) Sentry Post (Note: The plinth areas and capacities of sumps mentioned above may vary slightly)

(A) SURVEY & SOIL INVESTIGATION:- (i) Complete survey of the area with invert levels of the existing services (sewage, storm water drainsetc.) incl working out quantity of earth work as per survey sheet (Grid size 5mx5m) and re-routing the existing service. (ii) soil investigation boreing through any type of soil upto a depth 75m below ground level, conducting standard penetration tests and collection of samples (06 Nos BH 75m depth each) as per relevant IS codes. (iii) Conducting the laboraty tests on distturbed and undisturbed samples collected to find out the shear parameters, grain size analysis, index properties, natural moisture content bulk density, liquid limit, direct shear test, tri axial test unconfirmed compressive test stc as per relevant IS code. (iv) Submission of detailed report in triplicate consisting of each and every detail, location, bore hole profiles and cross section, description of soil strata, laboratory and feild test results, comments and recommendation.

(B) ARCHITECTURAL DESIGN AND DRAWINGS:- (I) Preparation of site plan conceptual architectural drgs three proposal with latest architectuaral views in 3D (on latest AUTODESK software) with relevant details like plans ,elevations ,section ,layout plan etc. based on data and local architectural norms. The conceptual drgs shall be submitted in duplicate hard copies for approval of Users and director (Arch) of HQ CE (NW) Kochi. (II) After apprval of conceptual drgs. , the preparation of Architectural drgs incl. sch of finishes ,internal water supply and internal electric supply drgs incorporating required changes/ modifications, and submit the same in four copies. The working drgs shall be on A1 or A0 size as required standard scale and working details on standard scale as per requirements. The final drgs shall be got approved from director (Arch) of HQ CE (NW) Kochi before taking final prints. (iii) After approval of arch drgs of the proj, submission of final drgs in hard copy (tracing sheets) to be submitted to this HQ duly signed by an Authorised Architect of the Consultant with CA registered number. (iv) Submission of 3D colour rendered Walk through of 3 mins Note: The consultant shall be liable to issue amendments in drg as required for CEFEES approved without any extra cost The rate quoted will include the cost of any such amended drgs.

(C) STRUCTURAL DESIGN AND DRAWINGS :- (i) analysis and design of the structure as per latest IS codes in design software STAAD PRO/ ETABS (member /component design may be carried out in MS Excel /SAFE etc) also. (ii) Preparation of structural drgs including all details in AUTO CAD incl original prints in tracing papers A1 size and submission of 5 sets of ammonia prints /white prints and one set of drgs in soft copy copied in CD (All drgs shall be drawn to a suitable scale and shall not be printed in " fit to scale" mode. Scale shall be clearly mentioned in the drawings. The preferred scales are as follows:- (i) Main Plan 1:100/150 (ii) Details of component 1 : 25 ( iii ) Minor details/ cross sections of columns and beams etc. 1: 10. (iii) Vetting of design and drgs from IIT/NITonly , since professional competecy for vetting is not coparable with othe engineering establishments. (iv) Submission of design folder (one set of soft copy and hard copy) containing input files of STAAD/ output of design and forces in tabular form, details of calculations, copy of MS excel pages ,one hard copy of arch and structural drgs, softcopy of all arch drgs. and structural drgs in AUTO CAD as well as soft copies of signed and certified drgs scanned in PDF format. NOTES :- (i) Design shall be carried out by qualified structural engineers. (ii) All provisions in the IS codes shall be strictly adhered and forwarded. (iii) The drgs Shall be got approved from E2 Design section head director of HQ CE (NW) Kochi before taking final prints. (iv) The consultant will be liable to attend the discussions and tender presentation after submission of drgs and issue required amendments drgs./ corrections as directed by the dept without any extra cost. The rates quoted here in will include the cost of any such drgs.(vi) The consultant also visit the proposed site before carrying out design if required by him without any extra cost to the dept.

(D) PREPARATION OF E/M SERVICES :- (a) Complete consultancy of E/M incl. design , preparation of site plan , schematic diagram for internal water supply & Telephone / TV cable, schedules and estimates alongwith supported quotations/ price lists for the following as given below, all as specified and directed for the final approval of bldg plan. (b) Fire Detection, alarms and fire fighting systems E/M incl staircase and lift well pressurization as per NBC / fire advisory as per CFFEES recommendation. (c) Ext water supply . Also the detailed BOQ of the work also be submitted. (d) Consultancy for design for centralized AC sysytem, Lifts(Passanger/goods), DG set, and lightening and protection. Notes :- The consultant required to be submit the following :-(i) submission of allied services schematic diagrams in connection with civil works i.e. pump houses, UG sump and other installations (ii) Site plan marked with existing and proposed external services .

(E) PREPARATION OF B/R SERVICES:- Preparation of Site plan/ drawings duly marked B/R and EM External services including schematic diagram for Internal water supply and internal electrification and providing BOQ of the services per details given by the department. (i) Preparation of detailed estimate for Area drainage, road, sewage disposal and fencing

(F) PREPARATION OF DETAILED ESTIMATES:- Preparation of detailed estimate and item wise yard stick including taking off quantities and abstract as per MES SSR 2020 , market rates analysis including preparation of tender and submission of details to CWE (NB) Kochii as per approved drgs for the above specified work.

(G) GREEN BUILDING:- The building needs to be designed to achieve minimum 3 star GRIHA rating. The consultant will include all specifications and provisions in the design for obtaining mimimum 3 star GRIHA rating. Bldg to be designed to facilitate energy saving by reducing artificial lighting and cooling load. Low flow water fixtures to be fixed. Natural lighting to enhance visual comforts. Low energy materials for interior of the bldgs. Waste segregation arrangements. E-waste handler. Sufficient number of trees and turfing. Scheme to be included: Rain water harvesting. Electric chargeing stations for e- vehicles. Bio waste managements. Solar energy consumption plant/setup. Energy efficient 5 star AC's and fans with service value 4.5 or BLDC Fans. Any other requirements for acquiring GRIHA norms.

Note:- The detailed scope and unforseen requirements will be finalised after discussion with User, MES and consultancy representatives.

GEO DESIGNS AND RESEARCH PVT LTD

Renaissance Arch Consultant Pvt Ltd