PROVN OF KOTA STONE FLOORING FALSE CEILING AND REPLACEMENT OF SHEETS IN BLDG NO T206 SM BARRACK PROVN OF TOILET BLOCK CONSISTS OF TWO WC ONE BATHROOM WASH BASIN AND 2 X URINAL AND PROVN OF SIGN BOARD AT HALDWANI UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete.

Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces mixed with WPC wherever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. complete all as specified NOTE -WPC shall be measured and paid separetely.

Material & Labour for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete.

Supply only WPC complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed.

Material & Labour for Mirror polished Kota Stone slab flooring 18-20 mm thick over with and including cement screed bed 15mm thick in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Kota Stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over with and including cement screed bed 10mm thick in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165complete all as specified and directed.

Supply & Fixing MS work as in wind ties for roof including securing bolts complete all as specified and as directed.

Material and Labour in repair second class hard wood in scantling, clean swan ,incl to replace old and delayed timber (including piecing, scarfing, etc., of old and new timbers if required) complete all as specified.

Material and Labour for Preparing newly plastered surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and as directed

Material and Labour for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rounded or chamfered on edges (using 12.5mm graded stone aggregate) complete all as specifed and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings complete all as specified and directed.

Supply & Fixing prepainted aluminium zinc coating GI based corrugated steel sheet (galvalume base) or thinknee 0.50mm having tensile strength of 550 MPA , in colour and profile as apporved by GE and to be facotry moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Supply & fixing of powder coated aluminium anodised snap grid frame work for false ceiling comprising of the following sections for making partitions of 605x605 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 37mmx24mmx0.3 mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick complete all as specified and directed.

Supply & fixing 4mm thick non asbestos E-board cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard /dense soil complete all as specified.

Material & Labour for PCC 1:4:8 type D-2 (using 40mm graded stone agg) as in foundation filling and mass concrete complete all as specified and directed.

Material & Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

Material & Labour for brick work with sub class `B’ bricks, straight on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified

Removing excavated soils to a distance exc 250m but n exc 500m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Use and waste of formwork to sides and soffits of beams, bands and the like for fair finished surfaces of concrete.

Material & Labour RCC Type B1 1:2:4 (using 20mm garded crushed stone agg) as in beams, cantilevers, bressummers, lintels and the like all as specified.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exc 200mm thick horizontal or slopping in fair finished of concrete complete all as specified and directed.

Material & labour for providing reinforced cement concrete as in slabs supported on walls, beams, columns, landings, roofs, shelves and similar items with plain faces 1:2:4 type B-1, using 20 mm graded crushed stone aggregate complete all as specified and directed.

Use and waste of formwork to chajjas and similar items including edges as in rough finished surfaces of concrete complete all as specified.

Material & Labour for RCC Type B1 1:2:4 (using 20mm graded crushed stone aggregate) for chajjas, complete all as specified and as directed.

Supply & Fixing mild steel reinforcement TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Supply & Fixing mild steel reinforcement TMT bars 6-8mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Supply & Fixing mild steel TMT bars 5mm dia and over upto 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips.

Material & Labour for moorum/red bajri filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed by Engr-in-charge

Material & Labour for broken stone or boulders Hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified.

Material and Labout for 10mm thick rendering in CM 1:3 on fair faces of brick work or concrete or plastered surfaces of ceiling finished even and smooth (without using of extra cement) complete all as specified and directed.

Material & Labour for APP based polymeric membrane minimum weighing 3.60Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with side lap not less 100mm and end lap not less than 150mm incl apply a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @ 0.30 Kg/ sqm including cleaning surfaces etc complete all as specified.

Supply & Fixing Steel ventilators with top hung shutters incl hinges steel peg stay complete all as specified and directed.

Supply & Fixing Steel windows with side hung shutters including box type hinge with steel handle, tower bolt and steel peg stay, complete with without glazing bars complete all as specified and directed.

Supply & Fixing framed work such as grills,gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders ; framed balusters; walk ways; railing and simillar work Con-forming to Fe 290 Gde E-165 complete all as specified and directed..

Supply & Fixing figured glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane 3mm thick glass complete all as specified and directed..

Supply & Fixing mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with alluminium staple and around all beading complete all as specified and as directed

Supply & Fixing solid PVC door frame of size 50x47mm made of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing Sintex Polycon and equivalent complete all as specified and directed.

Supply & Fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame work made out of MS tubes for top or bottom rail MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheets for trip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles and rail with suitable PVC sheets beading and jointed together with solvent cement supplying and fixing in the frame at site as specified in cluase No 8B.2.1 of SSR Part-II 2020 all as specified and directed.

Supply & Fixing aluminium handle, cast type anodized 150mm size complete all as specified and directed.

Supply & Fixing150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply & Fixing Butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed.

Material & Labour for cutting chases in brixk walls, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 25mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 750 ltrs capacity with and including 25mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Supply & Fixing Ball Valves Brass, 25mm dia, quarter turn, femaled threaded, screwed both ends for iron pipe for unions, complete all as specified and directed.

Supply & Fixing 15mm dia bib taps CP Brass with Capstanhead, screwed down, screwed for iron pipe of bore 15mm complete.

Supply & Fixing brass CP pillar taps fancy type for iron pipe of bore 15mm fancy type with capstan head.

Supply & Fixing in repair PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Supply & Fixing Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply & Fixing Brass chromium plated shower rose 125mm size with shower arm, including fixing to steel pipe or union complete all as specified and directed.

Supply& Fixing Tubular towel rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges with fixing arrangement complete all as specified and directed.

Supply & Fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as approved by GE.

Supply and fixing in repairs soap dish chromium plated fixed to plugs with chromium plated brass screws complete all as specified and directed. Make Prayag or equivalent as approved by GE.

Supply & Fixing Stop valves,15mm fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Material & Labour for 75 mm thick PCC (1:4:8 ) type D-2 as in sub base finished even and rough complete all as specified and as directed.

Material & Labour for 25mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) as in level course with finshining in cement concrete surface even and rough to receive screed bed complete

Material & Labour Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over with and including screed bed of 15 mm thick in CM 1:6 and pointed in white or coloured cement to match complete all as specified.

Material & Labour Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with and including back coat of screed bed or bedding layer 10mm thick in CM 1:4 and pointed in white or coloured cement to match complete all as specified.

Supply & Fixing vitreous China squatting pan, Orissa pattern incl CI trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also including setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed.

Supply & Fixing PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

Supply & Fixing vitreous china wash basin, white, flat back, size 450mm x 300mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed.

Supply & Fixing Vitreous China Urinal, Half stall type, white, including, urinal spreader, waste coupling and waste pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and Union for discharge pipe complete all as specified and as directed.

Material & Labour for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints fixed to walls including necessary clamps etc. complete all as specified and as directed.

Material & Labour for cast iron spun pipe 100mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and as directed.

Material & Labour for cast iron spun pipe 75mm dia for soil, waste or vent pipe in any lengths with or without ears, jointed with and including cement joints laid in trenches or floor complete all as specified and as directed.

Supply & Fixing CI spun pipe bends 100mm bore of any radius, diminishing piece or tappers complete all as specified and as directed.

Supply & Fixing CI spun pipe bends 75mm bore of any radius, diminishing piece or tappers complete all as specified and as directed.

Supply & Fixing CI spun pipe branch piece 100mm bore, double(eaqual or unequal), with parallel branches and fitted with oval access door complete all as specified and as directed.

Supply & Fixing CI spun pipe branch piece 75mm bore, single(eaqual or unequal),ordinary or inverted spigot or socketted type with parallel branches and fitted with oval access door complete all as specified and as directed.

Extra over CI spun pipe fittings if fitted with oval access door 100mm

Extra over CI spun pipe fittings if fitted with oval access door 75mm

Supply & Fixing CI spun fittings floor tarps of size 75mm with grating including jointing to CI pipe with lead joint all as specified and as directed fixed in repair incl making joint water tight complete all as specified and as directed.

Supply & Fixing CI spun cowls 100mm bore, complete all as specified and as directed.

Material & Labour for cement concete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 150/160mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

Material & Labour for unplasticised PVC pipe 150/160mm dia type 'B' with wall thickness 4mm (Min) of pressure rating 4 KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concret 1:2:4 type B-1 smooth finished, and reforming benching as required, for internal dia of pipe 150mm complete all as specified and directed.

Material & Labour precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 including necessary form work complete all as specified and directed. (reinforcement to be measured separately)

Material & Labour for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rouded or chamfered on edges (using 12.5mm graded stone aggregate) complete all as specifed and directed.

Material & Labour 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection incl finishing even and smooth w/o using extra cement, laid in bays including necessary form work complete all as specified and directed

Material & Labour for Forming contraction (Dummy) joints 65mm deep x 10mm wide with ceiling compound grade 'A'.

Material & Labour preparing newly plastered or unplastered surfaces of Ceiling and applying two coats of distemper oil emulsion paint complete all as specified and as directed

Material & Labour for Preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & including a coat of primer complete.

Material & Labour for 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars,window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over with and including screed bed of 15mm thick in CM 1:6 complete all as specified an directed.

Supply & Fixing for Formation Sign/symbol, Size 1 feet x 1.5 feet complete with Stainless Steel including chiselling for letters on any surface complete all as specified and directed.

Supply & Fixing for Writing letters or figures (Block, Roman, Italic or Indian) 20 cm high with Stainless Steel including chiselling for letters on any surfaces complete all as specified and directed.

E/M Portion Supply & Fixing point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed ISI marked (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size copper conductor cable multi stranded as in earth wire and connected to common earth dolly complete all as specified and directed.

All as per item No.95 herein before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board

Supply & Fixing lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply & Fixing switch piano flush type single pole, one way 6 Amp complete all as specified and directed.

Supply & Fixing socket out let 2 in1,3 pin, 6 Amp, flush type complete all as specified and directed.

Supply & Fixing ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed.

Supply & Fixing sheet metal enclusure for DBs(double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing 240Volt, 10KA, 'B' Curve miniture circuit breaker (MCB) of single pole and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply & Fixing 240Volt, 10KA, 'C' Curve miniture circuit breaker (MCB) of single pole neutral (SPN) and current carrying capacity 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit (ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 2.5Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 4 sqmm, one run of 2.5 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Supply and fixing LED lights T-5 fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours.complete all as specified and directed.. Note:- LED tube light shall be purches to get minimum 2 year warrenty of material from manufracturer.

Supply & Fixing 10W bulk head PDC aluminium housing with polycarbonate diffuser, SMD LED and heat sink integrated with housing complete all as specified and directed. Make -Havells Cat Part-HEXAFT10WLED857SSYMBOPC or equivalent cat part in make phillips/Bajaj.

Supply & Fixing propeller type AC ventilating fans 230 volts, 50 C/S heavy duty 1400 RPM, 300mm sweep (Exhaust fan) metal body and blades protected by metal guards, Bird guard for safety, two sleeves bearings, complete including the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core white 23/0.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor complete all specified and directed.

Supply and Fixing Steel water tube medium grade galvanised 20mm bore with all fittings such as socket, elbow, union, nipple etc and fixed to wall and ceilings or laid in floors complete all specified and directed.

M/S MADAN MOHAN PANT

ng associate