Repair and Renovation of Special Mobile Magistrate Room at Old Court Kulgam

Engagement of carpenter ,asst carpenters ,Jcb for repair renovation of old existing structure/ easing of doors windows incld other allied works complete

labours

carpenter

Providing,Laying, spreading and compacting stone soling of specified sizes in uniform thickness, rolling watering and compacting Including all carriages and lifts upto the site of work complete job

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (40mm nominal size)

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate (20mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and einforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): imported KD

Providing and fixing Panelled /glazed shutters for doors, windows and clerestory windows using 3.5 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.First class imported wood KD (30mm Thickness of Shutter)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : imported KD wood(30mm Thickness of Shutter)

Providing and fixing of 3.5 mm thic glass panes including beading complete job

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 30 mm Imported KD wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Imported Wood

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

12mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 coarse sand)

Providing coloured corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete 0.50 mm thick

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

P/F 12mm ply wood incld jamming of wood of different section Priming coat and diiferent colours as per engineer incharge necessary nails and fixture required complete with all carriage

P/F 18mm ply wood incld jamming of wood of different section Priming coat and diiferent colours as per engineer incharge necessary nails and fixture required complete with all carriage

P/F aluminium hardware fittings

Handles 100 mm

T Bolts 100 mm

T Bolts 150 mm

L Drop with Lock

proving and installation of electric points incld switches, sockets, wire of required dia with channels where ever required completed with all respects etc complete job as per Engineer incharge

proving and installation wall fan incld switches, sockets, wire of required dia with channels where ever required completed with all respects etc complete job as per Engineer incharge

Carriage of Materials

Stone aggregate of 10 km

Sand of 15 km