ARC of fabrication work of HT/LT line materials from raw materials and mild steel for Various Scheme under Vyara Division

WORK OF FABRICATION ITEMS FROM RAW MATERIALS OF MILD STEEL AT.VYARA DIVISION.

(TENDER NO-80 VYD/O&M/TECH/NO-80 /5033 DT.06.07.2026)

. NAME OF ITEMS UNIT RATE . AMOUNT

Fabrication of Anchor Rod from 16 SQ.mm MS Round bar

angle as per approved drawing and requirment of the

Fabrication of Eye Bolt from 16 SQ.mm MS Round bar with

2 supplying of 2 (two) nuts of suitable size as per approved No.

drawing and requirement of the company.

Fabrication of Turn Buckle from 16 SQ.mm MS Round bar

angle as per approved drawing and requirment of the

Fabrication of 9' (feet) long Top/Bottom /D.O. angle from

4 65mm × 65mm × 6mm M.S angle as per approved drawing No.

and requirment of the company.

Fabrication of 4'. 6" (feet) long Tapping / Bracing angle

5 from 65mm × 65mm × 6mm M.S angle as per approved No.

drawing and requirment of the company.

Fabrication of 2'.3" (feet) long Bracing / support angle

6 from 65mm × 65mm × 6mm M.S angle as per approved No.

drawing and requirment of the company.

Fabrication of 11 KV HT 'V' Cross Arm from 65mm × 65mm

7 × 6mm M.S angle as per approved drawing and No.

requirment of the company.

Fabrication of 11 KV HT Top fitting from 65mm × 65mm ×

8 6mm M.S angle and 50mm × 6mm M.S flat as per No.

approved drawing and requirment of the company.

Fabrication of Guy Clamp pair suitable for PSC pole from

9 50mm × 6mm M.S flat as per approved drawing and PAIR

requirment of the company.

Fabrication of Guy Clamp pair suitable for RSJ GIRDER

10 Pole from 50mm × 6mm M.S flat as per approved PAIR

drawing and requirment of the company.

Fabrication of 'U' Clamp from 50mm × 6mm M.S flat as

per approved drawing and requirment of the company.

Fabrication of 'C' Clamp suitable for PSC pole from 50mm

12 × 6mm M.S flat as per approved drawing and requirment No.

of the company.

Fabrication of ‘C’ Clamp pair suitable for RSJ GIRDER Pole

13 from 50mm × 6mm M.S flat as per approved drawing and No.

requirment of the company.

Fabrication of Three hole patti from 50mm × 6mm M.S

14 flat as per approved drawing and requirment of the No.

Fabrication of 9' (feet) long Top / Bottom channel from

15 100mm ×50mm × 50mm × 6mm M.S as per approved No.

drawing and requirment of the company.

Fabrication of 11' (feet) long Top / Bottom channel from

16 100mm ×50mm × 50mm × 6mm M.S as per approved No.

drawing and requirment of the company.

Fabrication of 9' (feet) long angle bracing from 50mm ×

17 50mm × 6mm M.S as per approved drawing and No.

requirment of the company.

Fabrication of Guy Clamp pair Suiltable for 10mtr PSC pole

18 from 50mmx 50mm M.S Angle as per Approved Drawing No.

and Specifation.

Fabrication of H.T.EXTN Suiltable for 10mtr PSC pole from

19 50mmx 50mm M.S Angle as per Approved Drawing and No.

Fabrication of 750mm LONG CHANNEL for HT AB

20 Conductor form 100mm x 50mm x6mm Channel As per No.

Approved Drawing and Specifation.

% above Or below

Rs. Twenty five lacs only.

NOTE:- GST EXTRA

DEPUTY ENGINEER(STORTE,

DGVCL,DIVISION OFFICE,VYARA