STMC works for 01 No. of Road for a length of 42.358 km under Bhadrak (R and B) Division, (Package-5).

Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes as per MORT&H specification cluse no 3002 and as per direction of the Engineer-in-charge

Removal of rank vegetation/weeds and undesirable vegetation from shoulders,embankment slopes up to ROW(bothsides) complete in all respects including breaking of clods,rough dressing and disposal of waste material and vegetation at a place outside ROW as per direction of Engineer-In-Charge and as per maintenance standards Clause no 3.1.(Frequency of cleaning will be one time in a quarter)

Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor etc complete.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-B Type IV retro reflective sheeting fixed cover 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67 a)90 cm equilateral triangle

b)90 cm circular

c)80cmx60cm Rectangular

d)90 cm high octagon

Providing for scraping cleaning the road surface applying tack coat using 3 Kg of Bitumen for 10 Sqm and laying 75mm thick BUSG in two layer 37.5mm thick each layer using 0.50 Cum of 25mm to 40mm size H.G (H.B) metal and 15.00 Kg of Bitumen for 10 sqm in each layer with 0.13 Cum of 12mm size H.g (C.H) chips as key stone for 10 Sqm spreading over and laying including heating pourring and spreading over and spreading bitumen, metal and chips

Providing, laying, spreading & compacting graded stone aggregae to Wet Mix Macadam speciication including premixing the materials with water at OMC in mechanical Mix Plant carriage by tipper and laying uniform layers with paver etc, complete.