SPECIAL REPAIR TO TOILET IN BLDG NO P 383 ADM BLOCK IN ZONE R AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: B&R works

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land complete all as specified

M&L for non skid coloured tiles of size 300x300x 6-7 mm thick fixed with neat cement slurry on flooring jointing white/ coloured cement to match over and including 15mm screed bed in cement mortar 1:6, all as specified and directed .

M&L for coloured glazed tiles of size 300x450x6 - 7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 all as specified and directed.

M&L for vitrified ceramic tiles Light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over a 15mm thick screed bed of cement mortar to all as specified and as directed.

M&L for vitrified ceramic tiles Light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm in skirting of walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over a 10mm thick back coat of cement mortar 1:4 all as specified and as directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

Taking down chowkhats or frame with shutter without taking off shutter from the frame area.Exc 1.5 Sqm to N.Exc 4.00 Sqm each all as specified.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet 10mm thick to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per sample kept with GE's Office.

S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing.

S&F aluminium alloy, anodised sliding door bolt of size 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy complete all as specified and directed.

Supply & Fixing 100mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type D-22 all as specified and directed

S&F 150mm aluminium anodized, barrel tower bolt of extruded section and fixed all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised 125mm long all as specified and directed.

S&F Anodised aluminium ventilator lover type (Minimum 115 micron anodising) including 4mm thick plan sheet aluminium section as per designation 63400 of IS 737 complete all as specified and as directed.

S&F anodised aluminium door air tight frame made of size 100mmX45mm,of sheet thickness 1.5mm with one or more rebate including jointing cleat etc for fixing anodised aluminium door shutter fully panelled ( two nos of panel of each shutter) with 5.5mm thick tinted glass shutter, rail made 80mmX45mm of sheet thickness 1.5mm ( top, bottom, middle and side rail) single/double leaf side hung type including necessary jointing cleat, anodised aluminium fillet, aluminium glazing clip with rubber gasket with aluminium fitting such as aluminium butt hinges 100mm long 3Nos on each shutter, aluminium anodised handle150mm,2 Nos D type for each shutter and locking 6 lever , one on each door, All door fitting except cleat shall be ISI marked.

S&F anodised aluminium sliding type glazed window, shutter with 4mm thick plain sheet glass fixed open track section 100X38mm having two track with members of window shutters of section 38X12mm run over fibre wheel rollers, in above item etc all as specified and directed Incl all necessary fibre wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing,clip,rubber packing, aluminium snap beading etc complete all as specified and directed.

S& F collapsible steel gates, top hung consisting of channel pickets pivoted flat bars, top and bottom runners brass handles etc as specified erected in position and securing runners with holdfasts and brackets, single or double leaf type all as directed complete and all as specified and directed.

Taking up of or down steel tubing and connections 15mm bore

All as per ser item No 18 here in before, but 25mm bore

S&F 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

S&F 25mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

S&F (SWR) gully trap 125/100mm, setting and jointing with solvent cement all as specified and directed.

S&F 15mm size angular stop cock with wall flange of Make ; Jaquar, Parryware or Equivalent

S&F 15mm size concealed stop cock of make : Jaquar,Parryware or Equivalent

S&F for fancy type Bib tap with wall flange suitable for 15mm bore iron pipe of make : Jaquar, Parryware, or Equivalent complete all as specified and directed.

S&F for stainless steel Pillar Cock 15mm bore With Base Flange of Make : Jaquar,Parryware or Equivalent

S&F stainless steel toilet holder ( any size) for best quality all as specified and directed

S&F Stainless steel towel ring oval shape of (any size) for best Quality all as specified and directed.

S&F for stainless steel soap holder (any size) for best quality all as specified and directed.

Demolition of brick or stone/boulder masonry, built in cement mortar including all quions,arches,pillers etc but excluding ashlars facing dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B" bricks straight or curved on plain to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed.

Rendering 10mm thick on brick work or concrete fair surfaces in cement mortar 1:6 finished even and smooth without using extra cement all as specified and directed.

Demolition of RCC roofs, floors (other than ground floors) beams, staircases, landing chajjas and similar suspended work all as specified and directed

Form work to soffits of suspended slabs such as roof slabs floor slab landing and similar work for rough finished surface of concrete flat complete specified and directed .

M&L for reinforced cement concrete 1:1 1/2: 3 ( Nominal mix) type A-1 (Using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns, in floor roof landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F TMT bars 10mm dia and over in reinforcement, cut to length bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild steel wire annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with gray cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing type all as specified and directed

S&F in repair for Vitreous china ceramic over counter china wash hand basin, white flat, size 550 x400 mm incl brackets waste coupling and waste pipe all as specified and directed

S&F for looking mirror 450X600mm size and all as specified and directed

S & F vitreous china wash down water closet (EWC) pan complete including seat cover for pedestal pan and jet spray and hand jet connected to stop valve of stainless steel best quality (Make of EWC : Cera/Hindware) complete all as specified and directed.

PVC connection pipe fibre reinforced 45cm long with brass check nut and PVC washers at both ends complete

M&L for PVC (SWR) floor trap with grating including jointing to waste pipe fixed with solvent cement. (Diameter of outlet in 75 mm) complete all as specified including taking out damaged floor trap in any type and position.

S &F vitreous china urinals, half stall type ,white (back or corner wall type )complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and union for discharge pipe all as specified and directed.

Dismantling of up to 100mm dia cast iron or pvc (SWR) pipes, jointed in cement mortar and taking out of trenches

Dismantling of up to 75mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches

S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed

S & F PVC (SWR) bends 110mm dia any radius all as specified and directed

S & F PVC (SWR) bends 75mm dia any radius all as specified and directed

S & F PVC (SWR) branch pieces 110mm dia, single (single Y) equal or unequal all as specified and directed.

S & F PVC (SWR) bends 110mm dia any radius and provided with access door all as specified and directed

S & F PVC (SWR) bends 75mm dia any radius and provided with access door all as specified and directed

S & F PVC (SWR) vent cowl 110mm dia any radius all as specified and directed

Schedule'A' Part-II: E&M works

Taking down carefully aluminium/ copper point wiring (light, fan, socket or power) complete (excluding sunken box) including fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and segregating serviceable fittings & set aside for reuse in the work and making good to disturbed surfaces of walls, floors, ceilings etc. complete all as specified and as directed.

Material & Labour for point wiring complete with cable PVC insulated, unsheathed, 1100V grade conforming to IS for one way SP, 5A with 1.5 Sqmm of cable of nominal area multistranded copper conductor (FRLSH) drawn through and including 20mm PVC casing capping including accessories on wall/floor/ceiling ( on surface) etc with 16G MS pressed steel terminal box with 2.8 mm thick laminated sheet cover for mounting switch, socket outlet etc complete with all accessories/fittings including PVC insulated continuous muli stranded copper earth wire (1.5 Sqmm) (FRLSH) and connected to common earth dolly complete for the following :- (a) One light /fan point controlled by one way one switch.

Material & Labour for switch piano flush type 5/6 Amps single pole one way.

Supply and fixing Ceiling rose 3 Terminal/PVC/ Polycarbonate, isolated body.

Supply and fixing LED tube light fittings box type luminaries with and including 1 x 20 watts LED tube, 2000 lumen output complete with energy savings T8, recess/surfaces mounted powder coated with connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible cable of 0.75 sqmm 3 core copper conductor from ceiling rose to light fittings complete all as specified and as directed. (Make :- Crompton, for Batten Cat No. IGP131LT8-16, for Tube Cat No. LTT8-20) or equivalent make of Havells/ Bajaj/Philips/Jaquar

Supply and fixing lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing 18 watt LED bulb, 1800 lumen output, in lamp holder complete all as specified and as directed. Make - Syska, Model- SSK-SRL 18W B22 or equivalent of Havells/ Bajaj/ Philips/ Jaquar

M/S C.S.P. ENTERPRISE

M/S SANKAR GOPE

M/S New Saha Enterprise

M/s Amrit Gope