REPAIR AND MAINT TO FENCING BOUNDRY WALLS AND DRAINS IN TRAINING FACILITIES AND NEARBY HARD STANDING AREA UNDER AGE BR II AT IMA DEHRADUN

Amount

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work and including removing debries out side IMA premises complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (except bricks) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work and including removing debries out side IMA premises complete all as specified and directed.

M&L for 15mm thick ready mix cement plaster on brick, concrete surfaces as in wall and Ceiling surface finished even & fair, finishing, curing, scaffolding including taking down of existing cement plaster etc and and including removing debries out side IMA premises complete all as specified and directed. (work to be carried upto a height of 7.5m) Make : ACC (Suraksha)/Ultratech (Readyplast)/Birla (Aerocom)/Unicrete

M&L for complete scrapping of existing treatment by meachanical sander & preparing surface of wall / ceilling and applying 2mm to 3mm thick acrylic damp proof wall care putty as per manufacturers instruction complete all as specified and directed.

M&L for Preparation of surfaces of wall / ceiling and applying two coats of weather coat exterior paint over a coat of primer and over a coat of 1mm to 1.5mm thick white cement base water proof putty complete all as specified and directed (work to be carried upto a height of 10.5m). Note : The work pertaining to periodical services shall be executed from authorized applicator as approved by GE

M&L for Preparation of old surfaces of wall / ceiling and applying one coat of weather coat exterior paint complete all as specified and directed (work to be carried upto a height of 10.5m). Note : The work shall be executed from authorized applicator as approved by GE

M&L for Preparation of old plastered surfaces of walls / ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots using mechanical sander/grinder and applying one coat of oil emulsion distemper on walls/ceiling complete all as specified and directed. Note : The work shall be executed from authorized applicator as approved by GE.

M&L for Preparation of surfaces of puttied wall / ceiling by mechanical sander/grinder and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed. Note : The work shall be executed from authorized applicator as approved by GE.

S&F in repairs Factory made heavy duty precast RCC Manhole cover confirming to IS 12592 (Part -1 & II) of size1200mm x 450 mm x 75mm of M-30 Grade of concrete and suitably reinforced with strong vibrating compaction by vibratory table including providing MS hook duly black painted, complete all as specified and directed.

S&F in repairs Factory made Precast plain / perforated RCC Drain/ manhole cover of size 900x 450 x 50 mm of M-30 grade of concrete reinforced with 8 mm dia TMT bar of Fe- 500 grade at 150 mm c/c spacing both way with strong vibrating compaction by vibratory table including providing MS hook duly black painted complete all as specified and directed.

S&F in repairs Factory made Precast plain / perforated RCC Drain/ manhole cover of size 450x 450 x 50 mm of M-30 grade of concrete reinforced with 8 mm dia TMT bar of Fe- 500 grade at 150 mm c/c spacing both way with strong vibrating compaction by vibratory table including providing MS hook duly black painted complete all as specified and directed.

M&L in repairs for Providing precast cement concrete louvres and jallies, type B-0 1:2:4 (using 12.50 graded crushed stone agg) 25mm thick (measured solid) set and jointed in cement mortar 1:4 including all mouldings complete all as specified and directed.

M&L for removing existing water tanks of any description exceeding 250 liters and not exceeding 500 liters capacity, cleaning all Scale dirt etc from tanks and from mouths of circulating pipes including washing with bleaching powder etc reconection and refixing in position with date of cleaning marking with paint complete all as specified and directed.

M&L for removing existing water tanks of any description exceeding 500 liters and not exceeding 1000 liters capacity, cleaning all Scale dirt etc from tanks and from mouths of circulating pipes including washing with bleaching powder etc reconnection and refixing in position with date of cleaning marking with paint complete all as specified and directed

M&L for 17 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including cutting chasing in brick work and half rounding of marbel in front face of self including taking down existing shelf and cutting chasing and repair for inserting marble shelfs complete all as specified and directed.

M&L for Non skid/capsule pattern full body coloured tiles 8 to 9mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the IMA premises complete all as directed. Note :- Colour as approved by GE.

S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

S&F Pre- painted colour galvalume aluminium Zinc coating GI based tile profile corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall, fixed with self tapping screws etc fixed in repairs complete all as directed.

S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall etc fixed in repairs including dismantling of complete all as directed.

S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based pre profiled (matching with roof sheet) plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, gutter fixed in repairs complete all as directed by Engr-in-charge.

S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed one end to wall with screw/fasteners with washers and wall plug at the distance of 300 mm and another end to corrugated sheet fixed with self tapping screws and gaps between wall to sheet shall be sealed with silicone etc fixed in repairs complete all as directed by Engr-in-charge.

Dismantling existing timber scantling in any position.complete all as specified and directed.

S&F Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.(Fe-410-W(Gde E- 250) quality B)

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with 15/20 mm dia PTMT ball valve with all accessories & fittings including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with 15/20 mm dia PTMT ball valve with all accessories & fittings including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

Demolition of cement concrete in ground floor and paving nexc 15cm thickness (below or above ground level) and including removal debries out side IMA premises.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone agg) as in foundation, filling, mass concrete and sub base of floor complete all as specified and directed

M&L for factory made 300x300x25mm heavy duty Chequered cement concrete tile with rubberised mould and of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. Make:- Tulip Infrastructure, Jain tiles Haldwani, NTC Panchkula

M&L for factory made Rubberised precast prepolished coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. Make:- Tulip Infrastructure, Jain tiles Haldwani, NTC Panchkula

M&L for factory made Rubberised precast prepolished coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. Make:- Tulip Infrastructure, Jain tiles Haldwani, NTC Panchkula

M&L for factory made heavy duty precast prepolished coloured cement concrete cobble stones paver block of size 100x100mm and 80 mm thickness of M-35 grade of fiber reinforced concrete (FRC) with approved colour, design and pattern, thickness & size / shape made by table vibratory method using rubber mould with strong vibratory compaction over 20 mm thick 1:4 Screed bed or bedding layer of mortar including dismantling of existing damaged flooring etc complete, all as specified and directed. Make:- Tulip Infrastructure, Jain tiles Haldwani, NTC Panchkula

M&L for 75mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork complete all as specified and directed.

M&L in repair for 40mm thick PCC type B1 1:2:4 (using 20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth with 3mm thick glass strips using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) as in coping/ benching including weathering, slightly rounded or chamfered angles and throating etc including necessary form work incl demolition of existing cement concrete of any description complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 20mm graded crushed stone aggregate) as in surface channels and drains including Desludging/ cleaning of open drain of any depth by mechanically means andremoval of uck outside IMA premises complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Dismantling post or post struts (wood steel or RCC) any section, including taking out embedded portion and making good disturbed ground in natural ground.

S & F mild steel joints angle channel or tee section and fix independently in concrete as fencing post and similar works congorming to Fe 290 Gde E- 165

S & F mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed to be fuitte 3rd with washers and one hexagonal or square nut, exc. 22.5 cm but n exc. 30 cm long dia of shank 11 to 15mm.

S&F in repair PVC coated MS galvanised chain link fencing of weight not less than 4.0 kg/sqm, PVC coating of 1.5mm and mesh size of 50 x 50mm of any type of standard rail straining bolts etc aperture and dia as decided by Engineer-in-charge.

S&F in repairs MS round bars 10mm dia & over cut to length bent to shape required incl cranking bending spirally for hoping for colm and backing ends and binding with & include MS wire (a headed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410W (grade E-250) quality A or Fe 290 (grade E- 165)

M&L preparation of cement concrete ground surface by brooming,washing as per requirement of synthetic layer and supplying & layer greenset system synthetic layer for basket ball ground, tennis Court as per specification of Indian/ International basket ball & tennis court federation consisting of layers as under : (a). Fibre Mesh : One layer Pasted with adhesive for concrete sealer over One layer of Primer. (b). Resurfacer : one coat of Acrylic Synthetic (KDF) Resurfacer 367-30 for filling and smoothing asphalt or concrete surfaces in preparation for Acrylic ITF approved court system and also fills the surface chips, voids and conceals repairs while providing a smooth surface of colour coating. (c). Precoat. Two layers of Acrylic Synthetic (KDF) based textured topcoat, ideal for colour coating courts and other sport pavement surfaces. (d). Overline : 100% Acrylic synthetic (KDF) based high hiding line paints with line marking. Notes: (i)Slope of 1inch in every 10ft on short side of the court. (ii)Minor Broom Finish Base with good surface to ensure no water logging. (iii)The rubber granules/crumb/powder should be pre-mixed by the manufacturer before importing. This ensures there is no human error / installing error while mixing of material. (iv)The manufacturer should have minimum 3 systems classified by International Basket ball/Tennis Federation. All certificates shall be uploaded and attached with the tender documents. (v)The validity of these certificates should be minimum 36 months to ensure latest product is being supplied. (vi)Item shall be executed directly through authorized OEM of manufacturer only and manufacturer has to give the guarantee for at least 03 years. (vii) The OEM shall deploy the applicator manpower only.

M&L for preparation of cement concrete ground surface by brooming, washing and scrubing with wire brush to remove algae, fungus and moss growth then apply a self priming coat of acrylic waterproof floor paint after diluting the emulsion with 30-40% water and after 6-7 hours apply 02 coats of acrylic waterproof floor coat emulsion for outdoor application after thinning with water to obtain brushable consistency and glossy finish etc all as directed by Engr-in-charge. Make: Indigo paints, Asian Paints, Berger paints, Nerolac paints.

M&L for 6mm thick asbestos cement plain building board, fixed to timber and iron frame work with screw including dismantling of existing board complete all as specified and directed.

M&L for obliterating old writing of any description, n exc 01 sqm with black paint in the form of diamond shape of size not exc 30x30cm and writing letters or figures (Block, Roman Italic or Indian), stops, commas, short lines, dashes, hyphens, brackets etc minimum of 10 cm height (total letters not exc 06 Nos) colour as decided by Engr -in charge complete all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding).

Aggrawal Builders and Furnishers

Amit Traders

M/S PUNDIR BUILDERS

M/S S P BUILDERS

sath sahib associates

JS CONSTRUCTION COMPANY

Sanjay Enterprises