Setting up of Bridges division office at fourth floor PWD Complex, Kozhikodeand providing additional facilities to NH North Circle office Kozhikode

Amount

detailed estimate

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.23.2 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm

15.13.2 : Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area beyond 3 sq. metres

15.57 : Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-ChargeDismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

14.59.1 : Polishing on wood work with ready made wax polish of approved brand and manufacture:Old work

od46386/2020_2021 :  Providing and fixing shelf of 4.2x2.9 x.60 m made with 19 mm thick marine plywood of approved brand with veneer both side decorative lamination over visible area including providing locks ,handles, hinges and all other fittings cost of materials and labour charges etc complete. Note:- measurement taken shutter facing surface only

od46797/2020_2021 : Finishing witH Deluxe Multi surface paint system for interiors and exteriors as per manufactures specifications: painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ .90 ltr/10 sqm of approved brand and manufacture.

od46803/2020_2021 : supplying and applying Melamine mat polishing of good quality approved brand on top of plywood by firstly applying chalk powder throughout for closing pores and sandpapering to make good andeven surface and applying polishing (two or more coat)

21.1.1.2 : For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.1 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

od46780/2020_2021 : Fixing the aluminium partitions/door with departmental materials as per the drawing, the rate is inclusive of fixing of glazing, particle board supplied by department in required position, using necessary screws and snap beadings etc. complete.

od46740/2020_2021 : Supplying and fixing electro plated aluminium framed shelves ,vertical members using aluminium alloy extrusion and covering with 19 mm thick plywood and 4mm ACP sheet,Lcleats,rubber beading,steel screws,including cost and conveyance of all materials to site and all lab v our charges,fabrication charges etc. complete as directed by departmental officers at site. Note:-measurment taken shutter facing surface only

od46384/2020_2021 : Engaging man mazdoor for shifting files and office furniture etc complete

Santhosh Kumar K.V.

Bidder Name

Santhosh Kumar K.V.

K V MANOJ KUMAR