DISMANTLING EXISTING OLD STEEL TUBULAR POLE AND PROVIDING LED STREET LIGHT WITH FRP POLE IN VALMIKIVAS BEHIND VEER SAVARKAR SHOPING COMPLEX AND VALMIKIVAS AREA OPP. DWARKA BUS STATION AT DWARKA , DIST- DEV BHOOMI DWARKA.(UNDER SJMMSVY GRANT YEAR 2025-26) WITH INCLUDING 5 YEARS OF O&M

Name of work : DISMANTLING EXISTING OLD STEEL TUBULAR POLE AND PROVIDING LED STREET LIGHT WITH

FRP POLE IN VALMIKIVAS BEHIEND VEER SAVARKAR SHOPING COMPLEX AND VALMIKIVAS AREA OPP. DWARKA

BUS STATION AT DWARKA , DIST- DEV BHOOMI DWARKA.(UNDER SJMMSVY GRANT YEAR 2025-26) with

Including 5 Years of O&M

BILL OF QUANTITIES

Item. No. Description of Item Quantities Unit Amount

1 Removing Exesting Electric Pole with Dismantling of RCC/ Masonry Foundation including 195.00 1966.47 Ea.

Removing First Street Light , cable and any other assessor ALSO SHIFTING all materials

in suggest by the nagar palika. all shifting and placing charge are include with rate.

dismantling foundation of pole and Extra Derbies are shifting by contractor in suggest

by department no extra pay for any Machinery.

2 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, 12.00 56.56 Mtr.

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -

227 erected in existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required size of copper lugs,

nuts and bolts if required.(e) One wire 6.00 sq. mm.

3 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to 1365.00 101 Mtr.

be erected as directed of following size.(A) 2 core 2.5 Sq. mm

Item. No. Description of Item Quantities Unit Amount

4 Supplying and erecting LED street light / Flood light fittings with High power White LEDs 195.00 3345.12 Ea.

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)(A) Street Light

(IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with

over-voltage protection. (i) 48 watts- Cat-lll (Note:- If require, ERDA testing will carry

out,testing charges will be deducted from bill. And deducted security deposite (2.5% of

Estimate cost) will be released after completion of replacement period of 5 years.)

5 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper 0.25 1961.42 Mtr.

Busbars with four equal Nos. of electrolyte bus having current density not more than

1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour

insulating tape for phase sequence of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.(A) Suitable for 100 Amp. Capacity.

6 providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and 195.00 270.68 Ea.

having breaking capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

7 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 4.00 668.62 Ea.

10KA breaking capacity & confirms to IS :8828 in existing box having following

capacity.(b)40 Amp.Cat.III

8 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 2.00 794.87 Kgs.

Item. No. Description of Item Quantities Unit Amount

9 Supplying & erecting earth pit of minimum bore dia.150mm size approved make 5.00 4591.46 Ea.

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved make OEM has to submit

test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time Necessary test report must be

submitted. (a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

10 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid 1000.00 126.25 Mtr.

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.(B) 4 core 6 Sq. mm.

11 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth 1000.00 357.54 Mtr.

for laying any size of cable or locating the fault all over the run and back filling the same

and making the surface as normal ground..(B) If additional machineries like hammer

driller or JCB use [Add] ( SOR-2021-22 I. no. 4-5-2-(B))

12 Providing & laying approved make Double walled corrugated pipes (DWC) of 1000.00 62.62 Mtr.

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of cable. below ground / road

surface for enclosing cable.(A)50 mm outer dia.

Item. No. Description of Item Quantities Unit Amount

13 Disconnecting the cable connection and Providing straight joint with PVC mould using 195.00 1083.73 Mtr.

heat shrink /cast resin type epoxy compound Insulating material and making the joint

complete using necessary in line connectors, hardener, earth continuity connection,

spacers etc. and reconnecting the same & ensure the joint resistance within the limits

as per IS. (A) up to 25 Sq mm Cable

14 Supply of approved make FRP Pole having following specifications: FRP Light Pole 195.00 17611.37 Ea.

made by CNC filament winding machine using thermoset resin polyester/epoxy resin

system) having minimum 62% glass content. The pole should be in one piece and

tapered round in shape, having smooth finish and should be totally free from corrosion

as well as non conductive & shock proof Pole should be provided with FRP Anchor Base

and it should be heavy duty, or MS Material duly painted with Epoxy paint.Pole should

be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented. A

highly weather resistant polyurethane coating shall be applied to the pole after applying

suitable primer system that ensures proper adhesion of the paint. Minimum coating

thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than

10% of the length of pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability features of poles as

per standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable

termination box with necessary accessories . The size of pole and type of installation

with foundation as per manufacturer details and site requirement are as below . (4) 'B'

class (Heavy Duty) pole suitable for direct grouting for single or a double arm.[E] Overall

Length of 7.0 meter, Average thickness : 8mm, Top/Bottom Outside Dia. 76/193mm

+/-2.Weight of Pole 30.0 Kg approx. (Burial Depth 1000 mm)

15 Providing FRP arm bracket of having 2 sets of suitable SS304 hardware for fixing the 195.00 2551.26 Ea.

brackets & spread of 1.2 Mtr(Suitable for 89 to 114 mm pole top dia(A) Single arm

Item. No. Description of Item Quantities Unit Amount

16 Supplying & erecting IP 55 grade following size section pillar fabricated from joint less 5.00 3423.9 Ea.

M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to be

buried in ground to have appropriate erection to work uniform until erected with

cement concrete foundation and 45 cms high bricks work finishing with plaster etc.

hinged double door internally supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one

is welded and other with nut and bolt for erecting bakelite sheet. Painting the Section

Pillar inside and out side with three tank powder coated paint. section pillar roof

should be without joint with water leakage proof & tested as per IP 55 test & followed

by IS 2147 of 1962 (B) 75 X 60 X 45 cm section pillar fabricated from 16 Guage MS Sheet

with angle iron legs 45 cms long made from 35 X 35 X 5 mm thick MS angle.

17 Supplying and erecting HYLAM sheet on existing angle iron frame.for following 2.25 2311.89 Sq.Mtr.

thickness.(f)12mm.

18 Supplying & erecting approved make Digital time switch having lithium cell 6 years 5.00 3168.37 Ea.

operative and operate battery backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup

time 1 minimum & LCD display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as directed.

19 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. 195.00 368.65 Ea.

galvanised iron pipe with coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

20 For using salt and charcoal / coke as required for pipe type earthing. 195.00 171.7 Ea.

21 Supplying & erecting power contactor ,AC3 duty for time switch complete erected as 5.00 2782.55 Ea.

per direction Cat III [D] 4 pole 440V 40 Amp.

I / Weam / are willing to carryout the work at…………..…………. % above/ below percent (Should Be written in figures and words)

of the estimated rate mentioned above Amount of my / our tender works out as under

Item. No. Description of Item Quantities Unit Amount

(*Please strike out whichever is not applicable).

*Estimatedamount put to tender *Estimatedamount put to tender

Deduct…….……% below Add……..…% Above

In words………………….. In words………………………..

Note 1:- The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer – In – Charge for which no extra

payment shall bemade

Note 2:- The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:- GST and Income tax TDS will be deducted at a source while making payments of bills.

Note 4:- In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement Consumption/16/C

Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Note 5:- GST WILL BE PAID EXTRA AS PER TENDER CONDITION