SPL REPAIRS TO BLDG P97 AND ADDN/ALTN TO TOILET AND PROVN OF PAVER BLOCK TO BLDG P1 AT AHMEDABAD

Amount

Demolition of Brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.

Demilition of cement concrete of any description and in any position not otherwise specially provided for complete

Dismantling timber scantling 40Sqcm and over in section in any position in unframed work as in rafters, purlins etc complete

Dismantling wrought iron or mild steel work of any description not oth-erwise provided for complete.

Dismantling asbestos cement (corrugated or semi corrugated, etc) sheets in roof covering complete.

Dismantling wall and ceiling boards any thickness including cover fillets complete.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar internal dia of pipe in 100mm complete

Excavation in trenches n.exc 1.5 M wide & n.exc 1.5 M in depth in soft and loose soil for foundation etc n.exc 10 Sqm on plan and getting out complete.

Removing excavated material n.exc 50m depositing where directed at a level n. exc 1.5 m above the starting point complete

Surface dressing in soft/loose soil n exc 15 cm deep trimming of natural ground (removing vegetation/shurbs/ brushwood. Undergrowth and carring away rubbish to a distance of 50 metre complete.

M&L for sand filling under floors or in foundations including watering and consolidation complete.

M&L for PCC (1:2:4) type B-0 using 20mm graded crushed stone agg as in coping /benching in man hole etc,finished even and smooth using extra cement incl necessary form work complete

M&L for precast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in appex stone/kerb stone with plain fair faces including chamfers, weathering throting etc and set in cement mortar 1:4 complete with joints to math size and shape as approved complete

Supply only integral water proofing compound complete

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete.

Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for conceled water pipe etc. and making good cutting not exc 10Cm girth on Brick walls complete.

M&L 18-20mm thick Granite (of any type) work (tablee rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade complete.

Taking down and refixing in samer opening chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete.

Taking down and refixing in same opening chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete.

Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutterwith particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete

S&F solid PVC door, cup board frame size 50mmx47mm made out of 5mm Prelaminated PVC sheet reinforced with MS square tube ingle side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as per specification and as per drawing shown on ser page No 150 of SSR Part II (for item 884) complete.

S&F for solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete

S&F 150mm long Aluminium anodised barrel tower bolts complete.

S&F 125 mm long Aluminium anodised barrel tower bolts complete.

S&F 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete

S&F sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete

S&F 150mm size aluminium anodised door handles complete

S&F in repairs 25 mm dia fancy type drapary curtain rods with and including suitable fancy type brackets and knobs to both ends as required fixed in repair complete.

S&F in repair tubular towel rail 20mm dia D type and 60cm long including brackets fancy type brass chromium plated complete.

S&F rolled mild steel in joist, angle, channel as in purlins, rafters cleats etc conforming to Fe-410- W (Gde-E-250) quality A complete.

M&L in repair of 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete

S&F in repairs 20 mm thick both side pre polished granite ( of any type) tiles machine cut in vertical at partition of urinal embeded in wall, jointed with CM 1:4 ans pointed with white cement with admixture of pigment to match the shade of granite stone including rounding to edges of stone slabe complete.

M&L PCC type C-2 Mix 1:3:6 (40mm graded stone aggregate), 75mm thick in plinth protection/path finishing the surface even and smooth without using extra cement with joints filled with bitumen grade 85/ 25 and sand in equal proportions by weight complete.

M&L 75mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete.

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling complete.

Roughening the surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust and brushing neat cement slurry with 3.0 kg of cement per Sqm complete

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete.

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete.

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete.

All as per item No 23 above but on vertical surfaces incl 10mm thick backing coat of tiles in CM 1:4 complete.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in dado / skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete

M&L in repairs providing machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade incl sand cusioning complete.

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete.

M&L for rendering on other than fair faces of brick work in two layers i.e., 10 mm thick in CM 1:6 and top layer of 5 mm thick in CM 1:4 mixed with water proofing compound in top layer @3% by the weight of cement or as per manufacturer's instructionS&Finishing the surface fair and even without using extra cement complete.

M&L 10mm thick rendering in cement mortar 1:6 on internal fair face of brick work or concrete surface complete.

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with wall care putty avarage 1.5mm thk and a coat of primer complete.

M&L for prepartion of new plastered surfaces on walls and applying two coats cement based paint over one coat of Primer on walls complete.

M&L complete removal of existing treatement and applying two coats of oil bound distemper with white wall care putty avaraging 1.5mm thk and a coat of alkali resistance primer on surfaces of walls complete.

M&L for complete removal of existing treatment and applying two coats cement based paint on over one coat of alkali resistance primer on walls complete.

M&L for preparation of old plastered and un-plasterd surfaces on ceiling applying one coat of white wash complete

M&L Preparation of old or previously treated steel surfaces of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete.

Taking up or down of 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete.

Taking up or down of 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete.

S&F 15mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete concealed to walls and ceilings or laid in floors complete.

S&F 20mm bore tubes, `medium grade', galvanised, with all fittings and fixed complete concealed to walls and ceilings or laid in floors complete.

S&F in repair low density polyethylene of pressure rating 6kg/sqcm pipe 50mm bore in any length laid in trenches or floor complete.

Dismantling of water tanks exc 500 & n exc 1000 ltr capacity & removing to store complete.

S&F rotational moulded PVC water storage tank cylinderical, vertical with closed top of 750 ltrs capacity, hoisted and fixed in position with and including PTMT float valve 20mm dia and making connections for inlet and outlet complete.

S&F in repair bib taps(long body) 15mm bore of fancy type cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete.

S&F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete

S&F in repair PVC connection 600mm long of dia 15mm complete complete.

S&F in repair 75 mm bore PVC (SWR ) PIPE in any length fixed to walls or floor with and including rubber ring joint complete.

S&F in repair 110 mm bore PVC (SWR ) pipe in any length fixed to walls and floor with and including rubber ring joint and MS clamps complete.

S&F in repairs PVC(SWR) bends 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete

S&F in repairs PVC(SWR) bends 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete

M&L in repair PVC ( SWR) gully trap 125/110 mm setting and jointing with solvent cement complete

S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete.

S&F plastic water closet seat cover white closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete

S&F Vitreous China urinals, half stall type (back or corner wall type) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe fittings incl flush complete.

S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding three track , powder coated aluminium sections of approved make, with or without sash bars, suitable for 5 mm thick glazing and Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangementsetc, frame of window should be not less than 1.5 mm thick section complete Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

S&F aluminium anodised powder coated ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and one portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary opening for exhaust fan if reqd and necessary channel frame work with rubber gasket and aluminium beading etc complete.

M&L for grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with suitable aluminium frame of size 37x19x2mm complete.

S&F powder coated anodised Aluminium door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock, with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete

S&F stainless steel butt hinges medium weight 100mm long complete.

Taking down and refixing of aluminum partition in same position including builder hardware if any comolete.

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest) 4mm thick of size 595 x 595 mm fixing with screws/clips all as per manufacturers instructions and direction complete.

S&F in repair aluminium powder coated fixed partition of aluminium frame as per following specifications : (a) Aluminium partition frame & middle rail not less than - 63.80 x 38.10 x 1.28 mm section. (b) 9 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed up to height not less than 0.90 m in bottom panel. (b) 5 mm thick glass pane- Fixed in top panel with jointing clips, glazing clips, rubber packing, screws etc complete. NOTE: - The rate included complete aluminium section with S&F of particle board and glass as specified above.

S&F in repair 15mm bore angle cock with flage & similar to Cat part No 8310 of Make Prayag complete

S&F in repair health faucet with one meter tube and hook & similar to Cat part No BEA-86 of Make-Prayag complete

S&F in repair CP toilet paper holder & similar to Cat part No BA-88 of Make-Prayag complete.

S&F table top wash hand basin of min size 500x500x130 round shape & similar to cat part No-FSS- WHT-29901 of Make Jaquar complete

S& F in repair 15mm bore pillar tap swan neck & similar to Cat part No 8314 of Make Prayag complete.

S&F flat back urinal with integrated wash basin and sensor tap & similar to Cera Cat No. S4025101 complete

S&F in repair soap dish of 1mm thick stainless steel box type fixed with screws of size 150mmX150mmX100mm complete.

S&F decorative type Mirror of 5 to 6 mm thick with beveled /grind and fixed with studs including 8 to 9 mm thick PVC solid sheet backing and PVC beading/border all around of size appropriate complete.

S&F PVC floor trap with grating including jointing waste pipe in runlead 100mm dia fixed in jointing with solvent cement complete.

S&F 40mm dia PVC waste pipe flexible 750mm long including nut washer cup bracket complete

S&F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws Complete. (Note : Corrugation shape and colour of sheet shall be as approved)

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.60mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete

S&F in repair towel ring & similar to Cat part No BA-21 of Make-Prayag complete.

Taking down carefully copper/aluminium point wiring (light/Fan socket or power) with fittings such as switch, sockets Ceiling rose pendent holders regulators etc. & Removing old/UNSV material from site and making good to the old disturbed surface complete.

M&L Modular Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm,and earth continuity conductor 1.5 sqmm (Phase - Red,yellow,Blue, Neutral - Black, Earth - Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed modular box with suitable top cover of same make switches,sockets,fan regulators complete for One light point controlled by one switch complete.

All as per Item No 98 above but for One fan point/Exhaust controlled by one switch.

All as per Item No 98 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.

All as per Item No 98 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.

All as per Item No 98 above but for One bell point controlled by one bell push.

All as per Item No 98 above but for one 16 amp socket outlet controlled by one switch on independent board using cable size 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4 sqmm (Green) making good the wall surfaces with matching colour on wall Complete.

S&F modular switch one way 6 amp 1 module complete

S&F modular switch one way 16 amp 1 module complete

S&F modular bell push, 6 amp, 1 module complete

S&F door bell, AC, 240 volts, single pole complete.

S&F modular socket 6/16 - 2/3 pin combined 2 module complete

S&F modular socket 6 amp 2/3 pin combined 2 module complete

S&F modular hum free electronic step fan regulator, 100 watt 2 module complete

S&F angle holder, insulated polycabonate body with back plate complete.

S&F Ceiling rose 6 amp, 3 plates polycarbonate body complete.

S&F LED Lamp 12 watt 230 volts complete.

S&F in repairs sheet metal enclosure MCB distribution board, double door with IP43 -IK 09 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing surface complete

S&F in repairs MCB distribution board SPN, 240 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete.

M&L 6 to 32 Amps MCB SP ( ISI Marked) 50 C/S 10 KA 'C' sereis complete.

S&F MCB 6 to 32 Amp SPN 50 C/S 10 KA 'C' sereis complete

S&F Aluminium Batten LED 20 watt tube light fiiting with decorative type fitting 4 feet long with Light Linear with its bright light output at 100 lumen/watt give ultra wide light distribution batten type including all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core 6500K ( fittings shall be fitted on two plastic square/round block) complete. Note : power factor should not be less than 0.90.Sqmm

S&F in replacement Recess/suspended slim LED panel light with powder coated rim 36 watt of size 2x2 feet high efficiency designer recessed mirror optic luminary with ceiling cut out size 36 watt including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete.

S&F in replacement bldg light LED Bldg light fittings on Bldg of height not exceeding 7.5 mtrs, comprising of epoxy powder coated housing, enclosed with glass cover in frame, for efficiency not less than 95 lumens/Watt, and minimum wattage capacity of 20 Watt complete.

S&F in replacement integrated LED bulk head light fitting 1X10 watts, connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete.

S&F in replacement existing unsv sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast, bipin holder, connector block etc all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core complete.

S&F sheet metal enclosure single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete.

S&F Ceiling fan AC sinlge phase 230/240 volts of size 1200 mm sweep BEE 5 Star rated (BLDC) complete including blade, down rod etc including connecting to ceiling rose complete. Note : Old unserviceable shall be deposited to AGE E/M store yard through RV.

S&F Ventilation fan AC sinlge phase 230/240 volts of size 225 mm sweep having plastic body with louvre including connecting to ceiling rose complete. Note : Old unserviceable shall be deposited to AGE E/M store yard through RV.

M&L in replacement submain wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in and including concealed PVC conduit and making good to the disturbed wall surfaces to match with existing surface complete

M&L in replacement submain wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in and including concealed PVC conduit and making good the disturbed wall surfaces to match with existing specification complete.

M&L Earthing with galvanized steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level )with top edge of the plate not less than 1.5 Mtr below normal ground level connecting with galvanized iron GI earth wire 4mm dia by means of bolt nut check nuts and washers of galvanized iron and provision of GI tubing medium grade (ISI marked)of size 15mm for protection of GI earth wire upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I complete including testing on completion.

Supply, laying and testing of LT UG cable, XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance (exc 1.0 km total distance), beyond the lead included in the rates, including loading, unloading and stacking at the destination complete.

chhaba construction

DMA PROJECTS

r s corporation