REPAIR AND MAINTENANCE OF SOLAR WATER HEATING SYSTEM HOT WATER GENERATOR PLANT WATER DISINSFECTION WATER TREATMENT CHEMICALS INCLUDING CONNECTED WORKS AT VARIOUS WATER SUPPLY INSTALLATION UNDER GE IMA DEHRADUN

Amount

Strip opening and descalling/gaswelding of water collector of Solar panel 1500 Ltrs/day capacity over rooftop of 3 rd floor or fixed in ground, fins/tubes from inside, (vertical type) cleaning with concentrate acid in fix ratio and repair /copper welding (soldering) of panel including replacement of rubber washer 2 Nos of thickness 3 mm, and arresting of detecting possible leakage reassembling and reinstallation at over OTM buildings with OEM approved manufacturer complete all as specified and directed.

S&F in replacement of Toughened/Texture glass of 3.2 mm thick having transmission more than 85 % including coonected rubber/nut botl/nickle cladding etc in the existing solar panel complete all as directed.

S&F heating element for solar water heating system of cap 3 KW.

S&F thermostat control for electrical back up for solar water heater as per existing.

S&F EPDM rubber gasket for solar collector.

M&L for insulation for GI pipe with glass wool 30mm thick with and including applying bituminous compound and aluminium cladding of sizes 20 mm dia.

M&L for insulation for GI pipe with glass wool 30mm thick with and including applying bituminous compound and aluminium cladding of sizes 25 mm dia.

Day to day maintenance and inspection of chlorine dosing plant at various water supply installation inside the complex ,alongwith replacement of deffective parts of dosing plant i.e injector assembly, connecting pipes and valve of each plant including strip opening of chloronome plant and replacement of all defective parts, washers by employing one skilled mechanic to achieve satisfactory residual chlorine result at user end from 09:00 hrs to 17:00 hrs during every working day. Note :-(i) Non attending complaint of chloronome plant is subject to a recovery of Rs 2500.00 per plant per day will be recovered from running payment. (ii) Supply only of spare parts shall be measured and paid for separately under respective items here-in-after.

Supply only Orthotoline Solution in 500 Ml Bottle Note:- Consumable in water supply installation having batch No.with manufacturing date should not exceed more than 90 days.

Supply and fix in replacement,high pressure transparent type Suction/Discharge PVC pipe 3/8 '' dia outer of chloronome plant, as per OEM complete all as specified and as directed.

Taking down defective electric motor of dosing motor 1 HP cap and supply and fix in replacement of dosing motor 1 HP cap squirrel cage type single phase 230 volt 50 Hz cap re-installation at site complete and testing complete all as specified and as directed by Engineer-in-Charge. .

M&L for taking down defective electric motor of dosing motor 1 HP cap disconnecting delivery pipe line repair/overhauling 1 HP, AC 230 volts opening into parts cutting of burnt winding, cleaning, slots, balancing of rotor, cleaning polishing and rewinding with same gauge of PVC insulated copper wire, replacement of impeller pressure switch and cleaning including testing complete all as specified and directed .

Supply only spare parts for Dosing cum feeding pump of chloronome plant, gear type of cap 40 Gallon/per day Make:- Declibac/Perls Filter and potter and watts to be incorporated in the work:-

Rotor assembly with bearing brackets and tollerance rings

coil assembly 250V 50 Hz

Single head feed rate control with shaft

Pump Head ( Ferrules 1/4'' and duckbill included)

Roller assebly set of 4

Pump Tube (Set of Five)

Injection Check Valve 3/8" (Set of Five)

Weighted suction line strainer 3/8"

Ferrule 1/4" (set of 24)

Check valve for Duckbill (Set of 5)

PCB as per existing type and size

PCB Plate as per existing type and size

Diafram as per existing type and size

Ajitator as per existing type and size

connecting nut 3/8" mail & female Note : Make of spare parts mentioned in 13.01 to 13.15 above shall be Declibac or Pearls filter as per site requirement.

Supply and pouring of Calcium Hypo Chlorite 65-70% chlorine content in granular form disinfectant for water treatment packed in 45 Kg Drum in the service tank of chlorine dosing plant . Make: sree Rayalaseema Hi- srength Hypo Ltd or E-in-C Approved. Note:-Consumable in water supply installation having batch No.with manufacturing date should not exceed more than 90 days complete with manufacturers test certificate.

Supply only copper sulphate for water treatment as approved by GE. Note:-Consumable in water supply installation having batch No.with manufacturing date should not exceed more than 90 days.

Supply only Alum crystal type in swimming pool for agitation and water treatment as approved by GE. Note:-Consumable in water supply installation having batch No.with manufacturing date should not exceed more than 90 days.

Testing of water from NABL approved testing lab for 27 standard parameters from Pump House ,bore well in different locations at under GE IMA Dehradun complete all as specified and directed .

M&L in repair of VALVE, SOLENOID 1/2" BSP of Boiler Plant as per existing type and size

M&L in repair of RECTIFIER-110-240V,AC / 180 DC, SKB 25,SIMICRON of Boiler Plant as per existing type and size

M&L in repair of CAP RUBBER for photocell of Boiler Plant as per existing type and size

M&L in repair of THERMOMETER 0-600 DEG,100 MM DIAL of Boiler Plant as per existing type and size

M&L in repair of HOSE METALLIC BRAIDED 3/8" x 40" LG of Boiler Plant as per existing type and size

M&L in repair of HOSE METALLIC BRAIDED 3/8" x 50" LG of Boiler Plant as per existing type and size

M&L in repair of BURNER ROD OBT 50- 352 MM LONG of Boiler Plant as per existing type and size

M&L in repair of HOOTER ROUND of Boiler Plant as per existing type and size

M&L in repair of SEALS SET of Boiler Plant as per existing type and size

M&L in repair of THERMOMETER 0-600 DEG,100 MM DIAL of Boiler Plant as per existing type and size

M&L in repair of PRESSURE GAUGE , 0 TO 40 KG 68 MM, 1/4" BSP BOTTOM CONNECTION of Boiler Plant as per existing type and size

M&L in repair of NOZZLE BYPASS ASSEMBLY40 GPH 2 MM ORIFICE of Boiler Plant as per existing type and size

M&L in repair of CONTINUOUS CURRENT MAGNET 180 V,DC of Boiler Plant as per existing type and size

M&L in repair of ELECTRODE 800 MM LONG of Boiler Plant as per existing type and size

M&L in repair of ELECTRODE CAP WITH HT CABLE of Boiler Plant as per existing type and size

M&L in repair of NOZZLE HOLDER of Boiler Plant as per existing type and size

M&L in repair of SEQUENCE CONTROLLER LAL 2.25 WITHOUT BASE PLATE of Boiler Plant as per existing type and size

M&L in repair of PHOTORESISTOR QRB 3 of Boiler Plant as per existing type and size

Supply only PH Correction chemical for softener plant

Supply only Sodium Chloride for softener plant

The service charges for the service visit for checking of hot water generator/ thermic fluid heater

S&F of First Aid Box of size 30x15x5 cm made out of GI sheet 2.0 mm thick including all standard medical treatment equiptment compleate all as specified

Supply only Chlorine Testing Kit with coloured sample complete with all testing fitments and OT solution in rexine finish box complete all as specified and as directed.

Supply only metal testing kit in the drinking water with necessary fitments and testing solution in rexine finish box complete all as specified and as directed.

S & F Isolate/de-energize the supply to the LT Panel Board/feeder pillar box of different rating capacities, 415 Volts/230 Volts, opening the doors/covers of the cubicle enclosure for carrying out the servicing/maintenance/repairs of the Panel Board, switch gear, metering etc and re-fixing the same in place after repairs including testing and commissioning of the panel board comprising of the following items :- (i) Cleaning the inside switch gear chambers for removing dust, carbon and rusted surfaces including cleaning with blower and apply insulating varnish. (ii) Check the condition of the insulators including cleaning for and replacement of insulators if required. (iii) Tightening up of all bus bar connections, cable connections, replace bolt, nuts wherever required.

Disconnecting and taking out old existing worn out control wiring connections incl cable lugs of LT panel board of 4 wire system and supply and connect with new cable PVC insulated, stranded copper conductor 2.5 sqmm incl new copper lugs and nuts, bolts, washers complete all as specified and directed.

Disconnecting and taking out old existing worn out cable lugs, nuts, bolts, washers etc from LT panel board of 4 wire system (incomming and outgoing) and supply and connecting with new aluminium lugs and nuts, bolts, washers etc complete all as specified and directed.

Taking out old existing worn out rubber gasket from shutters of LT panel board single door /double doors or openable on both sides and supply and fix new rubber gasket complete all as specified and directed.

Materials and labour for replacement of old rusted bolts with nut hexagonal including one flat and one spring washer of any size complete all as specifed and directed

M&L for brick with sub class B brick straight or curved on plain exc 6 mm mean radious built in cement mortar 1:4 complete all as directed.

M&L for cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in copping/support both including necessary form work etc complete all as directed

M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate as in copping/support both including necessary form work etc complete all as directed

M&L for rendering 15mm thick on fair face of brick work in cement mortar 1:4 finished aven and smooth complete all as specified and directed.

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for laying of CI pipes/GI pipes and getting out in soft /loose soil incl. , trimming the sides and forming bottom surfaces to required level complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, incl. spreading, leveling, watering & well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removal of surplus soil out side IMA premises and depositing where direct at a level not exc. 1.5 m above the starting point complete all as specified.

M&L for painting of various coloured old/New CI/GI pipe line of various sizes at water supply installation of syentheic enamel paint after removing/ scratching old painted surface incl preparation of surface complete all as specified and directed

VIJAY ENTERPRISES (BID ID -3089227)

KRISHANA ELECTRIC WORKS (BID ID -3076168)

M/S K K ENTERPRISES (BID ID -3089347)

RAMSONS DEVELOPERS (BID ID -3090766)