Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.6 LAccepted-AOC 6 GURU GOBIND SINGH NAGAR DHAKOLI DHAKOLI PATIALA PUNJAB 140602 | PATIALA | PUNJAB | 140602 | L1 | Accepted-AOC AOC amt is derived after deduction amt of sch of credit | |
| 2 | L2₹11.8 L+₹1.1 L (10.1%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹12.2 L+₹1.5 L (13.8%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹12.5 L+₹1.7 L (16.3%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹12.6 L+₹1.8 L (16.8%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹14.3 L
EMD Value
₹28,600
Closing Date
11 Mar 2020, 6:00 pmClosed
GE KARGIL
Office complex of GE KARGIL
As per BOQ
2020_MES_316711_1
GE/K-67/2019-20
Open Tender
Civil Works
Item Rate
180 days
KARGIL
As per NIT
7 documents required · 7 mandatory
₹500
GE KARGIL
₹28,600
Yes
1 Apr 2020
27 Jan 2020
13 Mar 2020
27 Jan 2020
11 Mar 2020
27 Feb 2020
Amount
Demolition of Unreinforced cement concrete of any description and in any position including disposal of old materials to a distance exceeding 500mtr but not exceeding 1.0 Km, complete all as specified and directed by Engineer-in-charge.
Taking down chowkats or frame shutter(without taking off shutter from the frame) but exc 1.5 sqm but n.exc 4 Sqm each, complete all as specified and directed by Engr-in-Charge.
M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over including 15 mm thick screed bead in CM 1:6, complete all as specified and directed by Engr-in-Charge.
M & L for 50mm thick, plain cement concrete, type C-2, 1:3:6, (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping, complete all as specified and directed by Engr-in-Charge.
S & F in repair 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and directed by Engr-in-Charge.
S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg/Sqm including necessary jointing cleats, glazing clips, ruber neoprene packing, 200mm handles 02 Nos in each door , hinges 3 nos for each leaf,tower bolt 150mm long 2 nos, sliding door bolt 300 mm, anodised aluminium snap beading, screws etc, complete all as specified and directed by Engr-in-Charge.
Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc. , complete all as specified and directed by Engr-in-Charge..
Point wiring with multi-stranded copper conductor PVC insulated and unsheathed cable in PVC casing and capping, 1.5 Sqmm with all fittings/accessories and including 1.5 Sqmm PVC insulated copper earth wire connected to common earth including closed recessed wooden terminal Boxes of suitable size made of 2nd class hard wood for mounting switches, sockets etc with 3mm thick laminated sheet cover for one light point or bell/buzzer point controlled by one switch, complete all as specified and directed by Engr-in-Charge..
All as per Srl item No 1.08 here in before but for one 3 pin socket outlet 5 Amps on independent board.
All as per Srl item No 1.08 here in before but using 2.5 sqmm for one 3 pin socket outlet 15 Amps on independent board.
S&F Switch piano 5 Amps, single pole one way flush type, complete all as specified and directed by Engr-in-Charge.
S&F Switch socket combination 2 in 1, and 3 and 2 pin 5/6 Amps, Flush type, complete all as specified and directed by Engr-in-Charge.
S&F Switch socket combination 2 in 1, 5 and 15 Amps, Flush type, complete all as specified and directed by Engr-in-Charge.
S&F Ceiling rose surface bakelite 65x50mm, two to three terminals, complete all as specified and directed by Engr-in-Charge.
S&F exhaust fan complete with plastic body , heavy duty , 240 V single phase of size 300 mm sweep incl making hole etc and fixation with 04 nos fully threaded bolt grouted in wall , nut and proding , wire mesh from out side complete with connection, complete all as specified. and directed by Engr-in-Charge
Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required, complete all as specified and directed by Engr-in-Charge.
Sheet metal enclosure for DB's Single door, single pole and neutral, 240V, 4 way with 200 Amp rated bus bar including blanking plates where required, complete all as specified and directed by Engr-in-Charge.
S&F MCCB 4 Pole 415 volts grade 63 Amps rating and 16 KA rupturing capacity suitable for fixing in DB complete all as specified and directed.
S&F MCB, single pole and neutral, 32 Amp, 240V, 10KA, complete all as specified and directed by Engr-in-Charge.
S&F MCB, single pole, 5 to 32 Amp, 240V, 10KA, complete all as specified and directed by Engr-in-Charge.
Sub main wiring with two single core 4 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and 2.5 Sqmm as continous earthing drawing and including PVC casing and caping of suitable size with all acessories, complete all as specified and directed by Engr-in-Charge.
Sub main wiring with two single core 6 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and 4 Sqmm as continous earthing drawing and including PVC casing and caping of suitable size with all acessories, complete all as specified and directed by Engr-in-Charge.
Sub main wiring with two single core 10 sqmm multistranded copper conductor cable, PVC insulated cable 1100 volts grade and 6 Sqmm as continous earthing drawing and including PVC casing and caping of suitable size with all acessories, complete all as specified and directed by Engr-in-Charge.
Supply and fixing LED 18 Watt Tubelight fitting decorative ultra slim square profile linear with extruded polycarbonate environment friendly Make Havells Cat part LHEXBTP7IN1W018, complete all as specified and directed by Engr-in-Charge.
Amount of Sch 'A' Part - II (Credit Schedule) Rs. 11469.00 (minus) as listed in Schedule of credit shall be deducted from total BOQ during AOC.
M/S LIAQAT ALI KHAN
CHAMRAN TRADING NAD CONSTRUCTION KARGIL
M/S MOHD HUSSAIN
M/S kashmir fair deal services
M/S B K ENTERPRISES
ABASS ENTERPRISE
M/S TRADE LINK
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .