Repair of Deptt tanker bearing Regd no jk21-0270 under MH 2215 non plan(Tanker service)

Amount

Complete change of Engine Oil of vehicle & dewatering pump and Transmission oil after flushing old used oils. Providing and fitting of oil filter, by pass fuel filter, air filter and safety air filter, air cleaner rubber, fan belt, hose pipe set, engine oil, diff. oil, gear oil. Complete job including labour and material cost.

Repairs to Radiator and intercooler. P/F of spares / material in place of defective/ worn-out parts of vehicle by way of dismantling of radiator assy. with providing / fitting of new parts i.e. radiator mounting - 04 nos, new water body -01 no., hose pipe set -01 set, coolant - 06 ltrs. testing of leakage, servicing of radiator and intercooler. The job includes cost of material and labour charges Complete job including cost of material and labour charges.

Dismantling of all the four-leaf spring assy. Segregation of leaves. Providing and fitting of main leaf rear 1 no. Main leaf front 1 no. Aux. leaves 2 no. 4th leaf 1 no., 6th leaf rear 1 no., Leaf Spring Bush 1 set, U bolt front and rear 4 nos., center bolt front and rear 4 nos., Leaf Spring pin 2 nos. front shocker 2 nos. clamp 8 nos. Re-tensioning of leaves before fitting. Greasing of all the pins. Complete job including labour and material cost.

Checking / Repair of all the four wheels of vehicle after dismantling of wheels. Segregation of components, washing properly all the comp. in K. Oil. P& F of front wheel brg. Inner - 1 no. front wheel brg. Outer -2 no. All oil seals, front and rear brake lining set, brake shoe springs, shoe hold down kit 2 nos. tie rod kit 1 no. rear wheel brg. 1 no. king pin kit assembly - 1 set. Greasing of all the wheels after providing brg. grease, adjustment of brakes by bleeding the brake system. Complete job including labour and material cost.

Removal of water tanker from the vehicle by crane after cutting of worn-out nuts and bolts patching at cracked portion of chassis. Repair of water tank inner and outer side by patching. Checking/setting the alignment of the chassis. Providing and fitting of cabin’s Hood pads. Denting and welding of front portion. Providing and fitting of bumper assembly of vehicle, repairing of doors and providing and fitting of new door glasses with rubber. Complete job including labour and material cost.

Fabrication of both the rear mud guards of vehicle out of MS Angle and heavy gauge MS Sheet. Fitting of mud guard on the vehicle with the help of MS stiffeners and high-quality welding. Complete job including labour and material cost

Fabrication of seats and backs after removing of all the Old / worn out seats and repair to battery box and seats / backs after providing and fitting of ply board coir, foam, rexene and cloth etc. Complete job including cost of labour and material cost.

Repair to electrical system of vehicle after removing worn out and burnt wiring with fitting of new LT wiring. P&F of tail lamp assemblies – 2 nos, Head light assembly -1 no., indicator assemblies – 2 nos., ignition switch – 1 no, fuse boxes with fuses, servicing of self-starter, alternator and providing and fitting of new battery as per specifications. Complete job including labour and material cost.

Dismantling of dewatering pump and repairing by replacement of piston, gasket set, main & big end bearings, pump nozzle & plunger set, spring, hose pipe set, then assembling & fitting on the vehicle.

Denting, welding and patching of show, bonnet, mud guards, front bumper, body tank and chassis, U-Bolts replacement and tightening, P/Fitting mud guard flaps, P/F of new front wind screen with rubber beading.

Repairs to clutch system of vehicle by way of dismantling the clutch system, removing of old damaged worn-out parts. P/F of clutch plate - 01 No., pressure plate - 01 No., clutch release bearing 01 No. clutch release fork - 01 set, fly wheel ring-01 No. allied spares like finger sets and then assembling. Complete job includes cost of material, labour charges and all types of taxes.

Labour charges for complete Painting of vehicle by way of scrapping its old paint and then painting of complete body, hood, tailboard with two coats of red oxide first and then two coats of décor paint and two coats on chassis and rims of four wheels with black paint. The job includes including letter writing, servicing greasing also. Complete Job including cost of material and labour charges.

Providing and fitting of front wind screen of vehicle with the help of gas welding. Job includes cost of rubber, adhesive and other required material and labour charges.

M/S GANPATI ELECTRICAL AND MECHNICAL WORKS (BID ID -2281918)