SMART PERIODICAL SERVICES TO OFFRS/JCO/OR MD ACCN UNDER AGE B/R-II AT MIL STN YOL

Material and Labour for waterproofing of exterior walls, including complete removal of existing plaster, raking out joints and applying two coats of acrylic polymer modified high performance coating (Smartcare Ultra Block 2k). The treatment shall be done from ground level including providing 15mm thick cement plaster in Cement mortar 1:4 finished even and smooth complete all as specified and directed by Engr-in-Charge. Note: The above specification of work to be executed only by applicator authorised by origininal equipment manufacturer Make: "ASIAN PAINTS/BERGER/NEROLAC"

Exterior Painting work including complete removal of existing treatment till top surface of existing plaster or newly plastered surface and crack filling with crack seal upto 3mm where required, making good/smooth the surface with wall putty and silicon additives, sanding these surface for removal of loose particles and applying one coat of waterproof primer on walls and chajjas with 10% dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal properties, complete all as specified. Note: The above specification of work shall be executed only by applicator authorised of origininal paint manufacturer Make: "ASIAN PAINTS/BERGER/NEROLAC"

Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/ down ward facia/soffits and fins of RCC chajjas /beams/columns/balconies etc. Supply and fixing by means of nailing, wire netting of galvanised wire 1.40 mm dia and mesh size 20 mm, brushing neat cement slurry with 3.00 kg of cement/sqm and Material & Labour for 20 mm thick cement plaster rendering in two layers of 10 mm each (top/final layer shall be rendered after final setting of under layer) in cement mortar 1:3 on concrete surfaces including necessary scaffolding at a height upto 7.00 mtrs. etc complete all as specified and directed.

Preparation of old painted wooden surfaces of any description and otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by Engr-in-Charge.

Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement :4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on stone masonry surfaces, surface finished even and smooth without using extra cement, all as specified.

M & L for rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or on concrete surfaces, finished even and smooth with using using extra cement complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 including dismantling of old tiles of any description complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections from wall / ceiling or laid floors including cleaning for refixing all as specified and directed.