SPECIAL REPAIR TO OR MD ACCN BLOCK E-2/1 TO E-2/8 AND CERTAIN REVENUE AND MINOR WORKS OF E/M NATURE AT K AREA UNDER GE CHANDIGARH

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5 sqm each and removing from site complete all as specified and directed.

All as item No 1 above but area exc. 1.50sqm & not exc 4.00 sqm .

S&F 125 x 60mm pressed steel frames for doors,windows with one or more rebates incl necessary fixing lugs,hinges lock, strike plate etc,complete all as specified and directed.

S&F 105x60mm pressed steel frames for doors,windows with one or more rebates incl necessary fixing lugs,hinges lock, strike plate etc complete all as specified and directed.

M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate, as for back filling the chowkats, as in coping, bed plates including necessary form work and weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-charge

M&L for providing cement concrete 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) in blocks for fixing hold fasts & pressed steel frames for doors including necessary form work complete all as specified and directed

S&F 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type with both faces are covered with decorative face veneer with lipping/frame to match, all as specified & directed by Engr-in-Charge.

S&F 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F in repairs for 18/19 mm thick medium density fiber board and fixed with screws in cup board shutters/ shelves and kitchen cabinets all as specified & directed.

M&L for 1st class softwood beads, straight (any size) for edging of MDF boards complete all as specified.

S&F solid PVC door frame of size 50mmx47mm made out 5mm plain colour PVC sheet reinforced with MS square tube made as per specification and drawing.

M&L for Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed. Note for item No 13 & 14 :- Glass / wire gauge shall be measured and paid separately.

S&F 3.00 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

All as item No.15 above but frosted.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

M&L mild steel work in framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165

S&F 150 mm size MS door spring including roller and roller plate by means of welding or screwing down complete all as directed.

S&F for PVC butt hinge 100 mm x 75 mm Cat No- 222 Make Prayag or equivalent as approved by GE .

S&F Aluminium anodised hasp and staple 100 mm , safety type, brass with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed .

S&F door stopper 100 mm of aluminium alloy body with rubber bottom complete all as specified and directed.Make

S&F aluminium handles, cast type, anodised of size 150 mm all as specified & directed.

S&F Aluminium anodised, barrel tower bolts of extruded section 200 long complete all as specified and directed .

S&F aluminium alloy, anodised, sliding door bolt 300mm long with hasp, stapple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and directed .

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wooden surfaces exc 10cm girth or girth incl preparation of new wooden surfaces complete all as specified and directed.

M&L for preparation of new steel or iron surfaces exc 10cm girth or girth applying two coats of synthetic enamel paint complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins arches pillars complete all as specified and directed.

M&L for Brickwork with fly ash modular bricks in cement mortar, straight or curved on plan exc 6m mean radius, built in in CM 1:6 all as specified.

M & L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in cement mortar 1:4 in walls ,complete all as specified and directed by Engr-in-Charge.

S & F of Stainless steel Kitchen Rack 750mm x 900mm x 250mm with adequate shelves and sections Heavy gauge wall mounted with fitting screws, complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete in any position at any height (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for Reinforced cement concrete 1:2:4 , type B-1(using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, shelves and the like complete all as specified and directed.

Repairing the edges of concrete chajjas, facias, slabs, columns & the like by providing PCC (1:2:4) type B-0 including all necessary form work and/or provision of rendering 15 mm thick (average thickness) in cement mortar (1:3), after applying a coat of cement slurry @ 3 kg/ Sq. m of surface, finished even and fair, surface area not exceeding 450 mm wide, in patches including taking down swoolen/damaged plaster or concrete complete all as specified.

M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished of concrete flat surfaces complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia & over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and building with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 20mm granite (of any type) workthick granite stone slab(table rubbed and polished)in steps, jambs, pillars, windowcills, cooking platformsand like in cement mortar (1:4) including pointingin white cement (1:2) usingmarble dust with admixtureof pigment to matchwith shade of granite incl 15mm thick screed bed in CM 1:4, complete all as specified.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 as on brick walls finished the surface fair & even smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 as on brick walls finished the surface fair & even smooth without using extra cement all as specified.

M&L for 10mm thick rendering in cement 1:3 on fair faces of concrete surface with finished surface even and smooth without using extra cement in ceiling complete all as specified.

Dismantling of floor hearth or wall tiles including cement mortar but not backing complete all as specified and directed.

M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc.

M&L for coloured non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm (Premium quality), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) , complete all as specified and directed .

All as per ser item No 44 but in vertical surfaces such as skirting over and including 10 mm thick rendering in CM (1:3) , complete all as specified and directed .

M&L for coloured non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) , complete all as specified and directed .

M & L for coloured ceramic glazed ceramic tiles in vertical surface 450X 300X 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade/colour of tiles,over and including 10 mm thick rendering in CM (1:3) , complete all as specified and directed .

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid,bedded and pointed in any mortar complete all as specified

M&L for 20-25 mm thick machine cut kota stone slab flooring over 15 mm thick cement screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed .

All as per item No.49 above but in skirting /dado etc over 10 mm thick rendering in cement mortar (1:4) complete all as specified.

Taking down AC rain water pipe any size or pattern incl all fittings heads, shoes, bends. Swan necks, etc including cleaning for refixing or removing to store.

Dismantling of cast iron pipes 75/100 mm fixed in any position complete all as specified and directed .

S&F PVC (SWR) 110 mm bore pipes single socketed, in any lengths with rubber ring joints, fixed to wall with PVC clamp complete all as specified and directed.

S&F PVC (SWR) 75 mm bore pipes single socketed, in any lengths with rubber ring joints, fixed to wall with PVC clamp complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bend of any radius with acess door complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bend of any radius with acess door complete all as specified and directed.

S & F in repairs 110mm PVC (SWR) branch piece, single (single Y) equal or unequal with oval access door complete all as specified and directed .

S & F in repairs 75mm PVC (SWR) branch piece, single (single Y) equal or unequal with oval access door complete all as specified and directed .

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door fixed in repair complete all as specified.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door fixed in repair complete all as specified.

S&F in repair PVC (SWR) vent cowl, complete all as specified.

S & F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed .

Cutting chases through brick walls pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps , cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing.(Girth exc 10 cm)

Taking up or down 15mm bore steel water tubing and connection including cleaning for refixing or removal to store all as specified.

S&F for 16mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl all connected fittings (elbow, socket, reducers etc.), complete all as specified and directed .

Taking up or down 20mm bore steel water tubing and connection including cleaning for refixing or removal to store all as specified.

S&F for 20mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl all connected fittings (elbow, socket, reducers etc.), complete all as specified and directed .

Dismantling wrought iron or mild steel work (incl connected wooden posts in stair cases) of any description not otherwise provided for

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes channels, plates etc., including welding, grinding buffing, polishing and making curvature (where ever buffing, polishing and making curvature (where everrequired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories etc., of required size, on the top of floor or & stainless steel dash fasteners, stainless steel bolts the side of waist slab with suitable arrangement complete all as specified and directed.

Demolition of cement concrete as in ground floors and in paving n. exc 15cm thick above ground floors complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6 ) type C-2 using 20 mm graded stone aggregate as in plinth protection laid in panels finish the top surfaces even and smooth without using extra cement

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) P or S type white with seat cover white (exluding fixing bolts, flushing cistern and flush pipe all as specified.

S&F in repairs Vitreous China wash basin white flat back of size 550x400mm with CP waste coupling & pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs 10 litres capacity PVC low level flushing cistern complete with all fittings complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm dia bib tap, chromium plated brass, fancy type with crutch or butterfly handle, screwed down complete all as specified and directed.

S&F in repairs 15mm dia CP Center hole mixer (for hot and cold water), screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore CP angle cock/ Concealed Stop valves fancy type,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L in repairs brass chromium plated shower rose 125mm size with or without swivel joints with shower arm 15 mm size, 195mm long with bend of 45 degree with flange , including fixing to steel pipe or union complete all as specified and directed.

S&F S&F in repairs chromium plated towel rail 60 cm long 20mm dia with flanges complete all as specified and directed.

S & F in repair stainless steel sink, 1.00mm thick for kitchen overall size 495mm x 420mm with bowl size 410mm x330mm x 160mm including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, waste coupling, PVC waste pipe, washers, connecting union etc complete all as specified and directed.

S&F in replacement PVC connection 15mm size with PTMT Nuts of length 450mm complete all as specified and directed

Dismantling of PVC water storage tanks capacity 500 to 1000 Ltrs.

S&F rotational moulded polyethylene (tripple Layer) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position white in colour all as specified in SSR Part-I, complete all as specified and directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge

M&L for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

All as item No.86 above but two coats on old wall surfaces.

M & L for applying two coats of oil bound distemper over 1-2mm thick wall putty including a coat of alkali resistant priming paint incl preparation of new plastered surfaces of wall complete all as specified and directed.

All as above item No.88 here-in-before but on old surfaces of walls including complete removal of existing treatment.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified.

M&L for preparation of old plastered surfaces and applying two coats of white wash on ceiling surfaces complete all as specified.

M&L for applying two coats of weather coat (Apex) over two primer coats of dump shealth on newly plastered surfaces of wall complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of weather coat (Apex) over two primer coats of dump shealth to old plastered walls as per manufacturer instruction including properly fillings the cracks with putty and applied by approved applicator complete all asspecified and directed

Demolition of lime/cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including chaina mozaic, WC etc complete all as specified and as directed.

M&L 25mm thick cement concrete as in screed bed in cement concrete type B0 1:2:4 using 12.5mm graded stone aggregate as in floor, finished fair and even (toilet & bathroom sunken portion) or any where as required, complete all as specified and as directed.

M&L providig protection layer applying 15 mm thick cement plaster in cement mortar 1:4 (cement :coarse sand) admixing Dr Fixit pidiproof LW @ 200 ml per 50 kg cement bag all as specified & directed directed. Make : Pidilite,Sikka,Fosroc or equivalent.

Providing and laying water proofing treatment of sunken portion of WCs, bathroom etc by applying cement slurry mixed with Acrylic based polymer modified cementitous composite compound coating of make as approved by GE. First layer of slurry of cement @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound s @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours Second layer of slurry of cement @ 0.242 kg / sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.200 micron thick polythene film pasted with the help of adhesives shall be provided over treatment.

M&L cement concrete 1:7:12 using 40mm graded brick aggregate in sunken floor all as specified and directed.

S&F 32mm dia GI spout pipe 600 mm long in PCC 1:2:4 complete all as specified and directed.

M&L for 75 mm thick Cement concrete type D- 2,1:4:8 (20mm graded aggregate) as in sub base of floors/path etc. complete all as specified and directed.

S&F in repair Chromium plated brass jet spray with tube 1.5 mtr pipe complete all as specified and directed.

Dismantling the entire roof covering including brick tiles, mud puska , mud plaster and water proofing treatment any number of layers or thickness etc of any description upto RCC roof slab and cleaning the surface including flashings and junction of parapets, etc with wire brushes and water to the entire satisfaction of Engineer-in-charge , complete all as specified and as directed.

M&L for Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate average thickness 50mm as in roof padding, complete all as specified and as directed.

M&L for rendering 10mm thick in cm 1 : 3 mixed with liquid water proofing compound as per manufacturers instructions on concrete/brick surfaces finished fair faces complete all as directed (WPC measured and paid separately) complete all as specified and as directed.

Supply only water proofing compound ISI marked complete all as specified. Make: Pidiproof WL (Dr Fixit) or equivalent ISI marked make as approved by GE.

Providing roof treatment as under : - (a) Applying bitumenous primer @ 0.30 litres per sqm over cleaned and dry roof surface including parapet (b) Material and labour for providing and laying 3mm thick APP modified polyester reinforced water proofing membrane with minimum weight of 3.60 kg/sqm , as specified. The APP membrane shall be laid using torch-on application with minimum 10 cm side overlap and 15 cm end overlap. The APP memberane shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet.

M&L for 20mm thick grey coloured PCC tiles 20cm x 20cm, machine pressed laid over & including 20mm thick screed or bedding layer in cement mortar 1:4 mixed with and including waterproofing compound (Pidiproof LW@20ml per 50 Kg bag) and joints grouted & pointed flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed.

M&L for framed work as in doors or gates of angle of any section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittngs (exclussive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified.

M&L Chequered cement concrete tiles 30cmx30cmx25cm thick with gre cement and pigment, over 15 mm thick screed in CM 1:6 set jointed and pointed in neat cement slurry in floors.

M&L cement concrete Type D2 1:4:8 (20mm graded aggregate) 100 mm thick as sub base and mass complete all as specified and directed,

S& F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. omplete all as specified and directed.

S&F in repair glass corner shelf, one set comprises of three pieces of corner shelf fancy type (small to large) 250 x 250mm, 200 x 200mm, 150 x 150mm) with all fittings,complete all as specified.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws,complete all as specified.

M&L for point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and unsheathed cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified for theOne light point controlled by one switch/one fan point controlled by one switch & fan regulator.

All as per item no. 114 above but One socket outlet three pin, 5 Amps on the same board.

All as per item no. 114 above but One socket outlet three pin, 5 Amps, independent.

All as per item no. 114 above but One light point controlled by one bell push.

All as per item no. 114 above but One light point controlled by two switch.

M&L for point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified.

S&F Modular metal flush terminal boxes with lumina plate and frame suitable for 1 module complete all as specified and directed. Make : Make :SSK/Legrand/Anchor

S&F Modular metal flush terminal boxes with lumina plate and frame suitable for 3 module complete all as specified and directed. Make :SSK/Legrand/Anchor

S&F Modular metal flush terminal boxes with lumina plate and frame suitable for 4-5 module complete all as specified and directed. Make :SSK/Legrand/Anchor.

S&F Modular metal flush terminal boxes with lumina plate and frame suitable for 6 module complete all as specified and directed. Make :SSK/Legrand/Anchor.

S&F Modular metal flush terminal boxes with lumina plate and frame suitable for 8 module complete all as specified and directed. Make :SSK/Legrand/Anchor

S&F Switch modular type single pole one module, two way, 6 Amps complete all as speciifed.Make :SSK/Legrand/Anchor

S&F Switch modular type single pole one module, 6 Amps complete all as speciifed.Make :SSK/Legrand/Anchor

S&F Switch modular type single pole one module, 16 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

S&F Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6 Amps complete all as speciifed. Make : SSK/Legrand/Anchor

S&F Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module,16 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

S&F Modular bell push single pole one module, 6 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

S&F Modular blank plate one module complete all as speciifed.

S&F Modular fan step regulator 120 watts for 1200/1400 sweep ceiling fan 2 module complete all as specified.

S&F Ceiling rose 3 pin, 230 volts PVC polycarbonate insulated body complete all as specified. Make : SSK/CONA/ANCHOR.

S&F Bell ding dong AC 230 volts PVC polycarbonate insulated body complete all as specified. Make : CONA/ANCHOR/LEGRAND.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. all as specified.

Sub main wiring in replacement (with approved colour coding as per IS) with single core 2 run of 6 Sqmm cable size FRLS PVC insulated multistranded copper conductor cable 1.1 KV grade (main cable two runs of main cable) alongwith one run of single core 6Sqmm FRLS PVC insulated flexible stranded copper Conductor 1.1 KV grade of earth for earthing drawn in suitable PVC conduit/ concealed conduits including Cutting chases in existing wall for laying of PVC conduits including making good disturbed surfaces with painting of wall matching with exisiting colour after concealing the conduit in wall all as specified.

Taking down carefully opper/aluminium sub main wiring complete, including existing batten/conduit etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified.

S&F MCB DB, TPN, 4 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, vertical, double door type suitable for fixing MCBs including connecting etc. complete all as specified and as directed.

S&F MCB DB, SPN, 12 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, vertical, double door type suitable for fixing MCBs including connecting etc. complete all as specified and as directed.

Supply and fix MCB SPN, 'C' series. 10 KA, 240 Volts 63 Amps capacity.

Supply and fix MCB SP, 'C' series. 10 KA, 240 Volts, 6-32 Amps capacity.

Supply and fix MCB TPN of capacity 63Amp , 16 KA , 415V , IP-43, IK-09 complete all as specified and directed.

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified and directed.

Excavation in trenches in hard/dense soil not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth and not exceeding 10sqmm on plan and getting out complete all as specified.

Returning,filling in including spreding, levelling, watering and well ramming in layers not exceeding 25 cm thick each excavated soil in trenches after the pipes have been laid and tested completed as in soft/loose soil, complete all as specified.

Removing of surplus soil/excavated material to a distance not exceeding 50meter and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

Supply and laying burnt bricks sub class "B" old size for cable protection laid flat lengthsise perpenducualr to the axis of cable complete all as specified and direted by Engineer-in-Charge.

Sand cushioning with clean dry sand to cables with layer of sand 8cm before laying of cable and 15cm thick after laying of cable complete all as specified. Note : For payment purpose punned thickness of 18cm shall be measured against spread thickness of 23cm as mentioned in para 19.75 of SSR part-I

Taking down existing control board (Meter Box) and supply and fixing sheet metal board made of 1.6mm thick metal sheet and painting 2 Coats with synthic enamel paint over a coat of primer including copper bus bar and fixed with wall for fixing meter complete with wiring, fitting and accessories, locking arrangements with handle (minimum size of box 65cmx75cm and adequate depth for the following equipments, internal wiring and termination of external cable, lugs and glands and conduits as required) comprising of following. (a) Incoming 100Amp 4 pole MCCB 25 KA-01 Nos. (b) Bus bar 200 Amp Aluminium (c) 10Amp DP MCB-01 No (Outgoing for stair case and garage) (d) 63Amp DP MCB-04 Nos (for meters) (e) Fixing only arrangement for electronic type energy meters single phase 240Volt 40Amps 50HZ -04Nos. MAKE: Indo asian/ M/S Power System and controls

Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009) complete all as specified and directed by Engineer-in-Charge. Note : The unit rate includes for protecton pipe 15mm and GI earth strip 4mm from top of earth plate upto 7.50 metre above ground level.

Supply and fix in repairs Electric water storage Heater (vertical type Geysers) 25 Ltrs BEE 5 STAR, 230 volts AC single phase with and including grouting with high tensile rag bolt, nut & washer etc as directed as per site requirement .Geysers to have glass lines tank, fero glass coated container,PUF insulation, glass coated heating element, 8 BAR rated pressurer, thermostat cut off etc.including cutting holes and making good the disturbed surface complete all as specified and as directed Make : Model no-Venus celo 25CV 25 Ltr BEE star rating-5 star and equivalent,Havells/Venus/Bajaj

S&F switch Piano flush type 15 Amps 230 volt, (ISI marked) complete all as specified(Make - Anchor/SSK/ cona)

S & F multi socket 2 in 1, 3 pin 5 Amps and 3 pin 15 Amps 230 volt, (ISI marked), complete all as specified Make : Anchor/SSK/ cona

S&F GI pipes 15 mm bore ISI marked medium grade with all fittings complete fixed on floor / wall with and including clamps etc complete all as specified and directed .

M&L for cutting & screwing existing steel tubing 20/15mm dia bore size for alternations or additions required for connection with inlet pipe of Geyser complete all as directed at site.

S&F PVC connection 450mm long for cold / hot water heavy duty made out of double layer at Nylon & wire fabric at pressure 6Kg / CM both side, CP brass 15mm bore coupling or nuts.

S&F Angle stop valve 15mm bore heavy duty fancy type chromium plated with long shank and cup concealed in wall complete all as directed.

S&F Stop valves, cast copper alloy 20 mm bore, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed of 15mm dia fancy type complete all as directed.

Supply, Erection, Testing and Commissioning of 16 Mtr high galvanized mast light with 9 Nos lantern 200 watts (flood light ) LED symmetrically fitted and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 guage and double drum winch with luminaire mounting arm, pully assembly operated manually as well as electrically morrised , aviation obstruction light, lightning arrester spike including RCC foundation complete Note: (i) Cost of mast is including pole,flood light fitting,RCC foundation (ii) Diemention of High Mast Light height of 16 meter High Mast Pole with 360mm bottom A/F, 150mm Top A/F with 2.5sqmm 5 core copper cable, rope grade AISI316 breaking load capacity 2350Kg.

Excavation in trenchs .exc. 1.5 mtr in depth but not exceeding 3 mtr in depth and getting out in any type of soil complete all as specified.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 Sq mm 3.5 core.

Supply and lay GI tubing light grade in trenches for protection of cable for 40 mm dia complete all as specified and directed .

Supply and fix 4 Pole MCCB 63 Amp 50 Hz 415 V with rupturing capacity 16 KA with suitable sheet enclosure for fixing complete all as specified and directed .

M&L for earthing complete with galvanized steel earth plate, electrode 60cm x 60cm x 6.0mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to using galvanised iron strip 25×4mm as earthing lead as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, connected to earthing test point, earth plate electrode surrounded by mixer of common salt and charcoal dust, including 20mm dia GI watering pipe ‘medium grade’, funnel with wire mesh, earthing chamber with cement concrete (1:2:4) type B-1, RCC chamber cover 80mm thick (1: 1 ½ : 3) type B1, excavation & earth work all as shown in electrical plate No 5 of SSR (Part-I) and testing on completion, complete all as specified and directed.

S& F time switch 415 volt three phase of 20 amp rating with contactor fitted inside steel box complete all as specified and directed .

M/s Nuway Constructors India Pvt. Ltd.

M/S MATLOOB AHMED