NIT NO. 1135/PWD(BMC), DTD. 06.11.2025

Supplying swaged and welded steel tubular pole of following specifications as per IS 2317: 1980 9 Mtr. Length, 108Kg, 410-SP-27

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling upthe excavated earth pit with shifted soil and ramming properly

Supply & Fixing of Sintex water proof type looping box on newly erected pole size 240 x130x 95 mm depth having hinged front cover & kit kat fuse unit 1no N.L on insulator 1no 4way backlite connector for 2nos compression brass gland for upto 3 core 16 sq.mm pvc /alu cable and having line with rubber gasket front cover with brass machine screw ect. Earthing terminal with lug on steel tubular pole near base including supply & fixing of Clamps with bolts & nut etc complete in all respect as per direct ion of E.I.C

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe Ref: PWD schedule page- G1 item 2(a)

Supply and delevary of195/200 W LED type flood light Luminaries with single dia ceramic base high power LED,PDC housing and intregrated flood optics for wide angle distrubition with IP-66 ingrase proction, external surge proction and epency 120 LM/ Watt confurming to latest assredition of LM 79 and LM-80 report and latetest NABL assredition. The inbuilt LED driver should be house with fittings. LED driver should be D50 certificied. LED driver and housing should be from the same manufacturer. LED should be warranty for 5 years and as per direction of EIC make: Philips/Crompton/ Bajaj/Havels or equivalant.

Fixing only Floodlight fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

Supply and fixing Iron clamp, Nutbolt clamp MS 3/3 clamp, and lablur charges.

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC)of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. a) 2 x 22/0.3 (1.5 sqmm)

Supply of 1.1 KV grade 4 core 10 sqmm XLPE insulated and PVC sheathed Al conductor armoured cable as per IS 7098 (Part-I) 1988 with upto date amendments. Make Gloster/Nicco/Havels/Polycab/Mescab or equivalent.

Laying of one cable up to 35 sqmm in under ground trench 460 mm wide x 760mm average depth with bricks proctions on the top of the cable with 8 nos bricks per Mtr. Including filling the sape between the bricks and cable and also the trench with shifted soil laveling up and restoring surface duly rammmed.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables 4 Core up to 16 Sq mm

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. (a) Up to 9 Mtr. Long pole (i) 1st coat of aluminium paint over 1 coat of RO priming.