SPECIAL REPAIRS TO BUILDING No P201 AT NAD BHEEMUNIPATNAM

Amount

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars, etc., and precast concrete articles and removing rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thickness(below or above ground level) and removing rubbish off the premises complete all as specified and as directed.

Demolition of RCC Jally,trellis work ( Jafri) including taking as under of battens in trellis and removing rubbish off the premises complete all as specified and as directed.

Excavation in trenches, not exc 1.5 m wide & not exc 1.5 m in depth; for foundation, paths,laying of cables etc, and getting out in soft / loose soil complete all as specified.

Excavation in trenches, not exc 1.5 m wide & not exc 1.5 m in depth; for foundation, laying of cables etc,and getting out in hard /dense soil complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified.

Removing excavated soil to a distance n.exc. 50 m and depositing where directed at a level not exceeding 1.5 m above the ground level complete all as specified.

M & L Sand filling as cushion bed for laying paver blocks including watering and consolidation complete all as specified.

M&L PCC (1:4:8) type D2(using 40mm graded stone aggregate) as in foundation filling in mass concrete complete all as specified.

M&L for precast cement concrete (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in kerb stone, window or door cills, lintles, bressumers, steps, quoin blocks (for use with masonry) string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling) corbles, brackets etc., (of any section indicated) with plain fair faces, including chamfers, weatherings, throating, etc., and setting in cement mortar 1:4 complete with joints to match complete all as specified.

M&L Brickwork with using flyash bricks straight or curved on plan exc 6m mean radius, built in cement morter 1:6 complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm and not exc 4.0 sqm complete all as specified.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified.

S&F Second class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified.

S&F 35 mm thick Flush shutters solid core construction,with block board core and plywood face panels with both face is covered with decorative face veneer with lipping/frame to match complete all as specified.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified

S & F 125 mm size cold rolled mild steel (medium weight) butt hinges complete all as specified.

S & F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified.

S & F 150 mm long aluminium alloy handles, anodised,extruded, fabricated type, complete all as specified.

S&F 300 mm long, aluminium alloy,anodised sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

S & F Powder coated aluminium anodised frame for doors,windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified.

S & F Powder coated aluminium anodised window and ventilator shutters,sliding type without sash bars, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, (minimum thickness of powder coating 50 micron) complete all as specified.

S&F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified.

S&F Frameless glass door of size 2.0m x 2.60m with 02 Nos of openable shutters of size 1.00 m x 2.60 m each using 12 mm thick factory toughened plain sheet glass using the following stainless steel fittings of polished chrome finish (satin stainless steel finish for handles) including acid finish for the entire surface of the door with white acid and including cutting necessary holes and cut outs complete all as specified and as directed by the Engineer-in-charge. (i) Corner lock patches with EPC and trike plate XL-C-4011A: 2 Nos. (1No of each openable shutter) (ii) Floor springs with 90 degrees open (EN4) : 2Nos (1No. for each openable shutter) (iii) Top patches XL-C-4012: 2 Nos (1 No. for each openable shutter) (iv) Bottom patches XL-C-4013 : 2 Nos. (1 No. for each openable shutter) (v) Top pivots XL-C-4014: 2 Nos. (1 for each openable shutter) (vi) 450mm long H-Type handles 25mm dia, of grade SS 304, XL-C-3003A:2 Nos. (1set for each openable shutter)

S&F 12 mm thick toughened glass door of size 1.30mx2.00m with openable one leaf fixed panes of size 0.30x2.00 m each using 12 mm thick factory toughened plain sheet glass using the following stainless steel fittings of polished chrome finish (Satin stainless steel finish for handles) including acid finish for the entire surface of the door with white acid leaving tagline of approx 300mmx300mm size using suitable stencil,etc on openable shutter and including cutting necessary holes and cut outs complete all as specified and as directed by the Engineer-in-Charge. (i) Corner lock patches with EPC and trike plate XL-C-4011A: 1 No. (ii) Floor springs with 90 degree open (EN4) : 1No. (iii) Top patches XL-C-4012: 2 No. (iv) Bottom patches XL-C-4013 : 1 No. (v) Top pivots XL-C-4014 : 1 No. (vi) 450mm long H-Type handles 25mm dia, of grade SS 304, XL-C-3003A:1set for openable shutter. (vii) Central connectors XL-C-40064:8 Nos (4 Nos for eachopenable shutter).

S&F 12 mm thick toughened glass door of size 1.00mx2.10m with openable one leaf shutter using the following stainless steel fittings of polished chrome finish (Satin stainless steel finish for handles) including acid finish for the entire surface of the door with white acid leaving tagline of approx 300mmx300mm size using suitable stencil,etc on openable shutter and including cutting necessary holes and cut outs complete all as specified and as directed by the Engineer-in-Charge. (i) Corner lock patches with EPC and trike plate XL-C-4011A: 1 No. (ii) Floor springs with 90 degree open (EN4) : 1No. (iii) Top patches XL-C-4012: 1 No. (iv) Bottom patches XL-C-4013 : 1 No. (v) Top pivots XL-C-4014 - 1 No. (vi) 450mm long H-Type handles 25mm dia, of grade SS 304, XL-C-3003A:1set for openable shutter

Dismantling wall and ceiling boards (fibre,pulp,insulation,etc) or insulation boards /slabs/blankets,of any thickness including cover fillets,etc complete all as specified and directed.

M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, size of the grid 605x605 mm complete all as specified.

S&F Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.

M&L 12 mm thick Gypsum board for ceiling and applying two coats of distemper oil emulsion over one coat of primer over a coat of 3 mm thick wall care putty complete all as specified.

Dismantling floor, hearth or wall tilling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for Non - skid/joint free ceramic tiles coloured 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified.

M&L for Non - skid/joint free ceramic tiles coloured 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for Non - skid/joint free ceramic tiles coloured 350x250x7mm thick or 450x350x7mm thick as in vertical surface such as dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.specified.

M&L screed bed or backing coat of mortar 10 mm thick in cement mortar 1:4 for fixing tiles in vertical surfaces such as skirting/dado,etc complete all as specified.

M&L Designer/Chequred cement concrete tiles of size 300X300mmx20 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.specified.

M&L Screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified.

M&L for 75 mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in path, plinth protection or hardstanding finished surface even and smooth without using extra cement complete all as specified.

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment , complete all as specified and directed

M&L for 20 mm thick granite tiles of any type,machine cut as in flooring including laid over 15mm thick CM(1:4) cement screed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and polishing complete all as specified.

M&L for 20 mm thick granite tiles of any type,machine cut as in steps, jambs, pillars, window cills,cooking platforms,etc including laid over 15mm thick CM(1:4) cement screed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and polishing complete all as specified.

Taking down cement plaster on brick or stone wall etc including ranking out joints hacking for keys scrubbing down with water etc complete all as specified.

M&L for rendering 10mm thick in cement mortar 1:6 on internal wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for rendering two coats, first coat 10mm thick in cement mortar 1:6 and 2nd coat 5mm thick in cement mortar 1:4 with water proofing compound on external wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified. (Note : Supply only approved water proofing compound shall be measured and paid separately under relevant item)

Supply only water proofing compound complete all as specified.

M&L Preparation of new plastered surfaces of walls and applying two coats of plastic emulsion paint over a coat of primer over a coat of 3 mm thick wall care putty complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying two coats of weather proof exterior acrylic emulsion paint over a coat of primer as per manufacturers instructions,complete all as specified and directed.

M&L for Removing old existing treatment on surface of ceilings and applying two coats of white wash complete all as specified.

M&L Removing old existing treatment completely on walls and and applying two coats of distemper oil emulsion over one coat of primer over a coat of 3 mm thick wall care putty complete all as specified.

M&L Removing old existing treatment completely on walls and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.

M&L Removing old existing treatment completely on walls and applying two coats of weather proof exterior acrylic emulsion paint over a coat of primer as per manufacturers instructions,complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified.

M&L 4 mm thick Aluminium composite panel cladding coated with PVDF paint laid on circular columns all as per manufacturers instructions complete all as directed by Eng-in-charge.

M&L Appying Texture painting over a coat of primer over two coats of putty ( one coat of 3 mm thick wall care putty and finally one coat of thin layer putty) all as per manufacturers instructions complete all as directed by Eng-in-charge.

Taking down 25 mm bore steel tubing and connections including cleaning for removal to store complete all as specified.

All as per Item No.57 above but 20 mm bore complete all as specified.

All as per Item No.57 above but 15 mm bore complete all as specified.

S&F 15 mm internal dia 3- layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittingsfixed in walls,floors,ceilings,etc complete all as specified.

All as per Item No.60 above but 20 mm bore complete all as specified.

All as per Item No.60 above but 25 mm bore complete all as specified.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary clamps as fixed in repairs complete all as specified.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary clamps as fixed in repairs complete all as specified.

S&F 40 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary clamps complete all as specified.

M & L for 75 mm PVC (SWR) multiple floor trap with grating including jointing with solvent cement jointed to waste pipe complete all as specified.

M & L for 110 mm PVC (SWR) gully trap with grating including jointing with solvent cement jointed to waste pipe as fixed in repairs complete all as specified.

S&F Vitreous China wash down water closet pan (pedestal pattern) with P or S trap including provision of fixing bolts and plastic seat cover white,with hanging device including 32 mm dia PVC flushing pipe, and connection to drain, etc as fixed in repairs,complete all as specified.

S&F 10 litres capacity, PVC valveless syphonic action type flusing cistern low level, white, with inlet, ball valve, float and handle as fixed in repairs complete all as specified.

S&F Vitreous china urinals,half stall type white(excluding flushing cistern,flush pipe and waste pipe) including providing and fixing plugs,bedding urinal against walls in CM(1:2) securing urinal to plugs with and 60mm long brass screws,pointing around urinal back in cement, complete all as specified.

S & F PVC flexible connection of 15 mm dia and 450mm long with brass check nut and union,etc as fixed in repairs complete all as specified.

S&F 15 mm dia stop valve,fancy type cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle with long shank and cup (concealed type) screwed both ends for iron pipe or for unions as fixed in repairs complete all as specified.

S&F PVC water tanks 750 ltrs capacity rotational moulded (cylindrical vertical with closed top) triple layered, hoisted and fixed in position complete all as specified and directed.

S&F 25 mm dia PP-R ball valves (brass insert) as per requirement of the site complete all as specified.

S&F 25 mm dia PP-R Gate valves (brass insert) as per requirement of the site complete all as specified.

Taking down carefully copper / aluminium point wiring surface/concealed [light, fan, socket, ceiling or power] complete including fittings, switches, ceiling roses, pendents, regulators, sockets, holders stair case light etc., and making good the disturbed surfaces complete all as specified.

M&L Point wiring concealed with 1.5 Sqmm (Nominal area) PVC insulated, sheathed cable FRLSH grade with copper conductors, single core, multi stranded 1100 Volts, ISI marked (IS 694) (For Phase, neutral ) drawn through and including 20mm dia PVC rigid conduit ISI marked, (IS 9537 Part III) Heavy grade with conduit accessories including concealed steel terminal boxes fabricated out of 2mm thick MS sheet, fitted with 3mm thick masonite or approved laminated sheet top cover for fixing switches, sockets etc, including 1.5 sq mm FRLS multistranded copper conductor cable as continuous earth wire complete and connecting the earth wire to common earth dolly for one LED light point controlled by one way one switch complete all as specified.

All as per Item No.78 above but one ceiling/exhaust fan point controlled by one way one switch.

All as per Item No.78 above but one 3 pin socket outlet 5 Amps with socket controlled by one way one switch independently with 1.50 sqmm multistranded board.

All as per Item No.78 above but one bell point controlled by independent board one way one bell push switch.

M&L Point wiring concealed with 2.5 Sqmm (Nominal area) PVC insulated sheathed cable FRLSH grade with copper conductors, single core, multi stranded 1100 Volts, ISI marked (IS 694) (For Phase, neutral ) drawn through and including 20mm dia PVC rigid conduit ISI marked, (IS 9537 Part III) Heavy grade with conduit accessories including concealed steel terminal boxes fabricated out of 2mm thick MS sheet, fitted with 3mm thick masonite or approved laminated sheet top cover for fixing switches, sockets etc, including 2.5 sq mm FRLS multistranded copper conductor cable as continuous earth wire complete and connecting the earth wire to common earth dolly for one 15 Amps power socket complete all as specified.

M&L for sub main wiring concealed with two runs of 1.50 sq. mm multistranded copper conductor cable FRLSH grade 1100 volt and one run of 1.50 Sq.mm multistranded copper conductor cable FRLSH grade 1100 volt drawn through and including PVC rigid conduit heavy grade 25 mm dia complete all as specified. Note: Three runs of 1.50 Sq.mm cable and one run of PVC conduit will be measured as one unit.

M&L for sub main wiring concealed with two runs of 2.50 sq. mm multistranded copper conductor cable FRLSH grade 1100 volt and one run of 2.50 Sq.mm multistranded copper conductor cable FRLSH grade 1100 volt drawn through and including PVC rigid conduit heavy grade 25 mm dia complete all as specified. Note: Three runs of 2.50 Sq.mm cable and one run of PVC conduit will be measured as one unit.

M&L for sub main wiring concealed with two runs of 4.00 sq. mm multistranded copper conductor cable FRLSH grade 1100 volt and one run of 4.00 Sq.mm multistranded copper conductor cable FRLSH grade 1100 volt drawn through and including PVC rigid conduit heavy grade 25 mm dia complete all as specified. Note: Three runs of 4.00 Sq.mm cable and one run of PVC conduit will be measured as one unit.

M&L for sub main wiring concealed with two runs of 6.00 sq. mm multistranded copper conductor cable FRLSH grade 1100 volt and one run of 6.00 Sq.mm multistranded copper conductor cable FRLSH grade 1100 volt drawn through and including PVC rigid conduit heavy grade 25 mm dia complete all as specified. Note: Three runs of 6.00 Sq.mm cable and one run of PVC conduit will be measured as one unit.

M&L for sub main wiring concealed with four runs of 10.00 sq. mm multistranded copper conductor cable FRLSH grade 1100 volt and two runs of 6.00 Sq.mm multistranded copper conductor cable FRLSH grade 1100 volt drawn through and including PVC rigid conduit heavy grade 25 mm dia complete all as specified. Note: Six runs of 6.00 Sq.mm cable and one run of PVC conduit will be measured as one unit.

S & F switch paino flush type single pole one way, 6 Amps, 230 Volts,50Hz complete all as specified.

S & F switch bell push flush type single pole one way, 6 Amps, 230 Volts,50Hz complete all as specified.

S & F Switch socket combination with indication lamp,2 in 1,3 pin, 5/16 Amps, 240V, 50 Hz, flush type, multipurpose, complete all as specified.

S & F Switch socket combination with indication lamp,2 in 1,3 pin, 5 Amps,240V,50 Hz, flush type, multipurpose, complete all as specified.

S&F Ceiling rose surface bakelite 65x50mm 2/3 terminals, 230 volts,50Hz, complete all as specified.

S&F Stepped type,single module electronic type fan regulator, AC, 240 Volts,120 W,50Hz, complete all as specified.

S&F Sheet metal enclosure SPN, with a two pin earth plug and socket,240V,50 Hz,with one MCB SP,20 Amps,complete all as specified.

S&F Ding dong bell single pole,230 Volts, 50Hz, complete all as specified.

S & F MCB DB,TPN, sheet metal enclosure, double door type, 4 way,AC,415 V with 200 Amps rated bus bar vertical/horizontal type with flush on wall including taking down old MCB DB complete all as specified and directed by Eng-in-charge.

S & F MCB DB,SPN, sheet metal enclosure, double door type, 8 way,AC,240 V with 200 Amps rated bus bar vertical/horizontal type with flush on wall including taking down old MCB DB complete all as specified and directed by Eng-in-charge.

S & F MCB TPN 100 Amps, 415 Volts , B series complete all as specified and directed by Eng-in-charge.

S & F MCB TPN 63 Amps, 415 Volts , B series complete all as specified and directed by Eng-in-charge.

S & F MCB DP 40 Amps, B Series,230 Volts , complete all as specified and directed by Eng-in-charge.

S & F MCB DP 32 Amps, B Series,230 Volts , complete all as specified and directed by Eng-in-charge.

S & F MCB SP 6 to 40 Amps, B Series,230 Volts , complete all as specified and directed by Eng-in-charge.

M & L for natural river sand as cushioning of cables, including spreading and punning down complete all as specified and directed by Engineer in charge. Note : punned thickness shall be measured for payment purpose

M&L Common burnt clay building bricks,sub class B of size 230x115x75 mm for cable protection complete all as specified.

M & L for GI Pipe 40 mm bore ( light grade) with all fittings laid in wall/road crossing/fixed to poles for protection of cable complete all as specified.

Supply, lay, test & commissioning of FRLS LT UG XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 3.5 core, 70 sq mm, complete all as specified and directed.

Supply, lay, test & commissioning of FRLS LT UG XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 2 core, 6 sq mm, complete all as specified and directed.

S&F Retro fit 20 Watt,linear LED,T8 tubular lamps with extruded aluminium body,PC diffuser and inbuilt driver along with LED batten suitable for T8 LED lamps,230V,50Hz,twith all accessories complete all as specified and directed. Make : Crompton cat part No.for Retro fit LED T8 tubular lamp LT T8-20 and Cat part No for LED batten for T8 tube DMLN1LT8-16 or equivalent model in Havells/ Bajaj/Philips/.Surya Roshni

S & F LED recessed mounted,1x4 slim panel 36 Watts,,230 V,50Hz, complete all as specified. Make : Pattern AURA II cat part No. LCPL-36-CDL (1X4) of Crompton or equivalent model in Havells/Philips/Bajaj.

S & F LED recessed mounted round,flat panel 12 Watts,,230 V,50Hz, complete all as specified. Make : Pattern Pearl cat part No. LSCRM-12W-CDL of Crompton or equivalent model in Havells/Philips/Bajaj.

S&F LED bulk head fitting,10W, 230V, 50Hz,IP-65 ptotection,with all accessories suitable for indoor and out door application including taking down existing light fitting complete all as specified and directed. Make : Model No. sun rise,cat part No.LBHE-10-CDL of Crompton or equivalent model in Bajaj/Philips/Surya Roshini/C&S/ Havells

S & F LED surface mounted light fitting,1x14 Watts,2 feet ,230 V,50Hz, complete all as specified. Make : Model Linnet cat part No.LCI-14-CDL, Crompton or equivalent model in Havells/Philips/Bajaj.

S & F Mirror light LED light fitting,7 Watt,one feet,230 V,50 Hz complete all as specified. Make : Model Linnet cat part No.LCI-07-CDL, Crompton or equivalent model in Havells/Philips/Bajaj.

S& F Building security light fitting,LED street light 30 Watt with bracket,complete with all accessories complete all as specified and directed. Make : Model ASTRA, cat part No.LSTS-25 CDL of Crompton or equivalent model in Havells/ Bajaj/Philips/.Surya Roshni

S&F Post lantern fitting,LED,40W, 240V, 50Hz,with all accessories fixing on existing poles complete all as specified and directed. Make : Model No. MAPLE,cat part No.LPTO-40-CDL of of crompton or equivalent model in Bajaj/Philips/Surya Roshini/C&S/Havells.

M&L 1.50 meter long GI Pipe 40 mm bore ( medium grade) with 2 Nos 90 degree beds as house service bracket including taking down unserviceable bracket,complete all as specified.

S&F HOT mouled (FRP) junction box for street light pole with locking arrangement with IP 65 protection of size 155 x 100 x 60 with 32 Amps 4 way heavy duty terminal block with 10 Amp MCB SP and two number of cable entry gland of standard size with 2 Nos suitable stainless steel bracket to fix the pole complete all as specified.

Taking down carefully Ceiling Fans / Exhaust Fans/wall mounted fans, ceiling cable ends,dismantling blades,removing fan and blades for taking to store and refixing back to its original position after repairs and making good and matching the existing colour to the disturbed surfaces of walls/ floors,etc complete all as specified.

M&L Rewinding the ceiling fan of any sweep and size with same guage of copper and existing model and type including replacement of bearings, shaft,rubber bush,capacitor,etc and painting of body and blades with writing MES No. on body complete all as directed by Eng-in-charge.

M&L Rewinding the Exhaust fan of any sweep and size with same guage of copper and existing model and type including replacement of bearings, shaft, rubber bush,capacitor,etc and painting of body and blades with writing MES No. on body complete all as directed by Eng-in-charge

M&L Rewinding the Wall mounted fan of any sweep and size with same guage of copper and existing model and type including replacement of bearings, shaft, rubber bush,capacitor,etc and painting of body and blades with writing MES No. on body complete all as directed by Eng-in-charge

M&L Earthing complete with CI pipe 80 mm dia 7.5 m with flanged ends centrifugally cast,class "A" joints with suitable stainless steel bolts,nuts and sufficient slot up to 7.00 m length buried directly and preferably vertically in ground with top flanged end 0.5 m above GL,welded/connected with 32x6 mm copper conductor by means of bolts, nuts, check nuts and washers of galvanised iron including PCC 1:3:6 type C1 chamber and RCC 1:2:4 type B1 cover 40 mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI light grade pipe for earth lead protection, 20 mm dia GI light grade pipe for watering, water funnel, testing point etc and connected to earthing test point including drilling of 400 mm dia bore in any strata of soil to lower the CI pipe complete all as specified and directed by Eng-in-charge and testing on completion.

N V S S K N SIVA PRASAD