Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.5 LAccepted-AOC 27 CHITRAKOOT ENCLAVE NEAR ANURAG NURSARY DEHRADUN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC Acceptance of Contract | |
| 2 | L2₹30.7 L+₹93,750 (3.15%)Rejected-AOC INDEX NO E 72 HQ CWE HILLS VILL PO MEHUWALA MAPHI NEAR RAJKIYA INTER COLLEGE DEHRADUN UK | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-AOC OK | |
| 3 | L3₹31.0 L+₹1.2 L (4.02%)Rejected-AOC 1 259 CHUKKUWALA DEHRADUN UK | DEHRADUN | DEHRADUN | UTTARAKHAND | L3 | Rejected-AOC OK | |
| 4 | L4₹31.7 L+₹1.9 L (6.30%)Rejected-AOC 381 2 SATYA VIHAR MANDIR MARG VIJAY PARK DEHRADUN 248001 UK | DEHRADUN | UTTARAKHAND | 248001 | L4 | Rejected-AOC OK | |
| 5 | L5₹32.6 L+₹2.8 L (9.31%)Rejected-AOC WING NO 7 2 10 PREMNAGAR DEHRADUN UK | L5 | Rejected-AOC OK |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
4 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
REPAIR TO TOILETS SHAFTS CHAJJAS AND ROOF OF TAB UNDER AGE BR I AT IMA DEHRADUN
2024_MES_647122_1
GE/IMA/T-16 of 2024-2025 9403/E8
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE IMA Dehradun
Refer NIT
6 documents required · 6 mandatory
₹500
Yes
GE IMA Dehradun
₹80,000
Yes
1 Jul 2024
19 Mar 2024
6 May 2024
20 Mar 2024
4 May 2024
20 Apr 2024
Amount
S & F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated tile profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.
S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet.
S&F rolled mild steel section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed. Make:- Tata, Jindal, Appolo
Refixing of Prepainted colour galvalume aluminium Zinc coating GI based corrugated tile profile or corrugated steel sheet or plain sheet of ridge/ valley gutter etc of any thickness and any colour as in roof covering, fixed with self tapping screws etc including filling old holes with silicon and sealed with bituminious flash tap of STP/ Pidilite/ Sika or as approved including dismantling existing sheet, complete all as specified and directed. Note :- Work shall be executed upto triple storied building.
Repairs of Prepainted colour galvalume aluminium Zinc coating GI based corrugated tile profile or corrugated steel sheet or plain sheet of ridge/ valley gutter etc of any thickness and any colour as in roof covering, fixed with self tapping screws etc including filling of screws & holes with silicon and sealed with bituminious flash tap of STP/ Pidilite/ Sika or as approved in existing roof sheets including providing necessary self tapping screws or bitumenious washer if any, all as per site requirement, complete all as specified and directed. Note :- Work shall be executed in roof upto triple storied building.
Preparation of surface cleaning, drying, making it sound & free from surface contaminants, removal of dust, laitance, grease, oil, curing compounds from release agents & other foreign particles, by wire brushing, grinding etc, incl removal of all old sealent and other treatments (if any) and Supply and apply of material for repairing the edges of the joints (in case of weak concrete at joint edge) and also configuring joint width ( in case of expension joints with irregular width more than the width of the specified combiflex tape width) with epoxy repair mortar as per manufacturers instructions, complete all as specified and directed. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator of STP Ltd/ Sika/Pidilite. 2. The work shall be carried out upto triple storied bldg height.
M&L for applying epoxy based membrane adhesive on both sides of joints, before and after fixing of flexible FPO based membrane, all complete as per manufacturers instructions, complete all as specified and directed. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator of STP Ltd/ Sika/ Pidilite. 2. The work shall be carried out upto triple storied bldg height.
Supply material and apply 2mm thick and 300mm to 350mm wide flexible FPO based membrane SG system chemical based modified flexible polyolefin (FPO) with advanced adhesion, classification to EN 13501-1, service temperature -300C (min) to + 400C (max) in wet condition and -300C degree ( minimum) to plus 600C(maximum) in dry condition and the Tensile strength > 12N/mm2, Tear strength >40 N/mm, Elongation at break >600% ( as per EN 12311-2), as per manufacturers instructions, complete all as specified and directed. Make- STP Ltd/ Sika/ Pidilite. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator of STP Ltd/ Sika/ Pidilite. 2. The work shall be carried out upto triple storied bldg height.
Cutting of groove in brick or concrete walls 50mmx 50mm including cleaning, making dust free and applying epoxy based membrane adhesive on all sides of groove including fixing of APP membrane 1 metre wide and 3mm thick over crumple joint as per site requirement and filling the groove in cement mortar 1:3 with smooth finish, all as directed by Engr-in-Charge.
M&L for filling of existing cracked crumple, including cleaning out, washing for making dust free surface before filling as per manufacturers instructions, finished the suface properly, all complete as specified and directed.
M&L for filling of wall and floor tile joints with epoxy based tile grout on existing walls, floor or any surfaces, including cleaning out, washing for making dust free surface before filling as per manufacturers instructions, finished the suface properly, all complete as specified and directed.
M&L for Repairs to roof in patches not exc 5.00 Sqm each patch as in wall parapet chajjas, crumple joints, wall & roof junction etc for roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of cold applied bituminous oil based primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen VG- 30 grade @ 1.00 Kg/Sqm after a interval of minimum 8 hours of priming and layilg of APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method after a interval of minimum 8 hoursof hot bitumen coating by authorised applicator of manufacturer of Pidilite/Sikka, laid as per the manufactures instructions with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment, cleaning off all foreign matter by wire brushing, cleaning off surface with water and removal of spoil etc including removal of debris from site beyond IMA campus,complete all as specified nand directed. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator as approved. 2. Work shall be executed upto triple storied building. 3. The work shall be carried out in stages and each stage shall be passed by Engr-in-Charge and GE.
M&L for roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of cold applied bituminous oil based primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen VG- 30 grade @ 1.00 Kg/Sqm after a interval of minimum 8 hours of priming and laying of APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method after a interval of minimum 8 hoursof hot bitumen coating by authorised applicator of manufacturer of STP/SIKKA/PIDILITE laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign matter by wire brushing, cleaning off surface with water and removal of spoil etc including removal of debris from site beyond IMA campus complete all as specified nand directed. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator as approved. 2. Work shall be executed upto triple storied building. 3. The work shall be carried out in stages and each stage shall be passed by Engr-in-Charge and GE.
M & L in repairs water proofing treatment on roof slab including picking,sweeping cleaning and washing down with water to remove dust & providing water proffing described as under :- (a) Surface prepration with polymer modified mortar,GP grout mortar & treating of construction joint ,filling of honey combs. (Cement : Sand (crasher stone dust): multipurpose polymer of asian /sikka/Berger (b) cleaning the surface and applying ( Resin & Hardner ) Epoxy Primer Sikka /Asian/Berger ) on the cleaned surface fort bonding of rubbished polyurethane based coating with the existing concrete surface.(c) Supplying,providing & applying water proofing treatment to Terrace area rubberised polyutherene based coating,single component highly elastomeric seamless cold applied modified PU coating or equivalent product of sikka/Berger/Asian) including all necessary surface prepration,coving using multipurpose polymer,water pont test etc.complete as per manufacturer's specifications and aapplication methodology.The same coating shall be applied in two coats achieving a total thickness of 1.0mm thick.The coating shall have dual combination of 250% elongation,complete all as specified and directed. Make:Sikka/Berger/Asian Paint LTd,as recommended by Engr-In-charge and as approved by GE. Note:-(a) Work shall be executed by autrhorised applicator of manufacturer as per manufacturer's instructions and upto roof height of triple storied building (B) 03 years manufacturer's guarntee shall be given by the contractor.Work will be executed in smart assurance system complete all as specified and directed.
M&L for 20mm thick plaster in ready mix plastering over roof mixed with (Water proofing compound) (Liquid) as per manufacturers instructions including brushing neat cement slurry @ 3 Kg/Sqm over old RCC roof including taking down existing plaster on roof complete all as specified and as directed. Note : Water proofing compound (liquid) shall be measured and paid seperately.
Repais to Toilet shafts well by taking down cement plaster of any description on brick wall or concrete surfaces, built in cement mortar including raking out joints, hacking for key , scrubbing down with water etc upto 15 metres height in narraow space and rendering 12 mm thick using ready mixed cement mortar, mixed with liquid WPC as per manufacturers instructions, surfaces finish even and smooth without using extra cement, over water proofing coating of 2K, all complete as specified and directed. Note :- 1. Water proofing coating of 2K and WPC liquid compound shall be measured and paid seperately in respective items of BOQ. 2. Rates are included for arrangement of scafolding, ladders, supports & safety measure items and narrarow space working situations etc upto roof level height of triple storied bldgs.
M&L for Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius built in cement mortar (1:4) as in half brick wall, including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.
M&L in repair for Urinals star white color size of 375 x 390 x 590 mm snow white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed by Engr-in-Charge. Make :- Cera Cat No.- S4020112, Jaquar, Kohler
S&F in repair vitreous china wash down water closet pan (padestal pattern), white including plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device. Complete all as specified.
S&F in repair Vitreous china WHB Star white oval type counter top WHB 63 x 50 cm fixed in repair complete all as directed. Make :- Cera (Ist quality), Jaquar, Kohler
S&F CP Health Faucet with 1.2 M. long flexible tube chrome braided with wall hook Make- Cera cat part No. F 8030111AB or Jaquar Cat No. ALD587, Kajaria Kerovit CAT No. KA580020
S&F Chromium plated Angle valve 15mm dia (angle cock) cast fixed in repair complete all as directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Kohler
S&F Two way chromium plated angle cock 15mm dia with wall flange fixed in repair complete all as directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Kohler
S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as directed.
S&F 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Kohler
S&F CP pillar tap long extended body for table top with aerator including all fitting and fixtures.Make Cera Platinum series or equivalent all specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Kohler
S&F Chromium plated waste coupling with fly nuts 32mm dia suitable for wash hand basin, fixed in repairs, complete all as directed.
S&F CP Bottle Trap with Fully Casted Body 32 mm with 190 mm and 125 mm Long Connecting Pipes & Wall Flange fixed in repair complete all as directed Make: Jaquar, Cera, Kohler
Supply and fixed in repair PVC waste pipe 32 MM dia plain flexible pipe suitable for wash hand basin as direted.
S&F PVC connections 15mm size with PTMT nuts of length 450mm, all complete as directed .
S&F PVC connections 15mm size with PTMT nuts of length 600mm, all complete as directed .
S&F Chromium plated towel rail 600mm size fixed in repair complete all as directed.Make: Cera Meridian(SS 304) Cat No. F5015103C4,Jaquar Continental Cat No. ACN 1111SM, Kajaria Kerovit Cat No. KA 930001
S&F Chromium Plated steel soap dish fixed in repair complete all as directed Make: Cera Meridian(SS 304) Cat No. F5015160C,Jaquar Continental Cat No. ACN 1131N, Kajaria Kerovit Cat No. KA 930003
S&F Chromium Plated steel toilet paper holder fixed in repair complete all as directed. Make: Cera Meridian(SS 304) Cat No. F5015110C4,Jaquar Continental Cat No. ACN 1153S, Kajaria Kerovit Cat No. KA 980009
S&F Chromium Plated Spreader for Urinal fixed in Repair Complete all as directed.Make: Cera/Jaquar/Kohler
S&F, 100mm dia chromium plated grating with/without hole fixed in repair complete all as directed.
Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. Make:- Astral, Prayag, Supreme
Supply and Fixing, CPVC Brass thread Elbow complete all as specified & directed.
Supply and Fixing, CPVC Brass Thread Tee complete all as specified & directed.
Supply and Fixing, CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified & directed.
Supply and Fixing, CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified & directed.
M&L, for cutting into brick or concrete wall for inserting rain water pipe or spout of 110mm dia bore including PVC pipe 110mm dia upto 1.00 meter length, making leakproof surfaces by filling and jointing the cutting with monotop plaster and sealed with epoxy based patch repair water proof putty of Sika/ STP/ Asian etc as approved, all complete as specified and directed.
Supply and apply solvent free, moisture insensitive epoxy resin-based patch repair putty on pipe penetration surfaces including cutting a minimum 25 to 40mm wide groove around the mouth of 100 to 200 mm bore rain water pipe and cleaning, washing with water, making dust free surface, filling the cavities in the sides at mouth of pipe section with suitable free flowing Grout Material of Sika/ STP/ Fosroc/ Dr Fixit as approved, to a thickness of minimum 20mm on pipe and concrete joint, as per manufacturer's specifications/ instructions, finishing smooth the pipe mouth for proper flow of rain water, all complete as specified and directed. Note :-The work shall be carried out upto triple storey bldg height.
M & L for replacement of Granite stone slab 20mm thick , of any colour (of any type) machine cut (table rubbed & polished), as in WHB platforms, shelves and like, bedded in slope with and including 18mm average thickness of screed bed in cement mortar (1:6) and jointed with grey cement slurry, and pointed with white with admixture of pigment to match with shade of granite stone including moulding of exposed edges and dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.
S&F Mild steel TMT bars 8mm dia and over, bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc in fair finish surface.
M&L for RCC 1:2:4 type B1 (Using 20mm graded crushed stone aggregate) in Slabs supported on walls, beams and columns, floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L, for Oval shaped cutting into Granite/marble in WHB platform for inserting/ fixing oval type WHB including grinding, rounding edges, polishing for new WHB or refixing the old WHB, in repairs, all as required to complete the job, all as directed.
S&F in repair 12mm thick frosted toughened glass for urinal partitions,door shutter etc and like including cutting,polishing,rounding corners and bevelling all around and making holes etc as required including stainless steel brackets/corners for fixing complete all as specified and directed
S& F Factory made 30 mm thick single extruded WPC (Wood Polymer Composite) solid Moulded Flush Door Shutter Spray Painted with solvent based colour of required size with 2.4 or 6 rised panel design on front side with 10mm deep mould on single side with grain texture of comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately
S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window& other frames/ chowkhats of size65 x 125mm comprising of virginPVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheathusk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headedSS screwshaving minimum frame density of 750 kg/cun, screwwithdrawn strength of 2200N (face)&1100N (edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with and including MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete all as per direction of Engineer-In-Charge.
S&F Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as directed
S&F 150mm long aluminium anodized handle cast complete all as directed.
S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.
S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.
M&L for Glazed ceramic coloured tiles of size 400 mm x 350mm x 6mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in tile grout to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in tile grout to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer with ready mix mortar, complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.
M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4, type B-1 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of existing old cement concrete floors etc complete all as directed.
M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as levelling course in sub floors below tile etc complete
M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius built in cement mortar (1:4) as in half brick wall, including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.
Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 100 mm internal dia of pipe complete all as specified and directed.
M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.
M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.
S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed.
S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.
S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.
S&F PVC(SWR) floor trap plain with grating including jointing with solvent cement 75mm bore outlet fixed in Repair
S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.
S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.
S&F Stack clamps made out of 25mm X 5 mm flat iron and 16mm dia round iron stays, for fixing 100 mm bore pipe including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed
M/s RK ENTERPRISES
Sharda Enterprises
Aron Water Proofing and Pest Control
M/S S P BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .