Repair/Maintenance of certain OTM Accn of 501 FSEG under AGE B/R-II of GE Dehradun

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed.

Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and fair (without using extra cement) complete all as specified and directed.

Material and labour for 10mm thick rendering on brick work or concrete surface in cement mortar 1:3 surface finished even and smooth as in ceiling complete all as specified and directed.

Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of distemper oil emulsion over and including applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed.

Material and labour for two coats of exterior grade 1st quality weather coat paints over a coat of alkali resistant priming paint over and including applying of 1-2 mm thick wall care putty finish wall surface even and smooth including preparation of new plaster external surfaces of wall etc complete all as specified and directed.

Material and labour for preparation of newly plastered surface of ceiling and applying three coat of white wash complete all as specified and directed.

Material and labour for complete removal of existing treatment of walls including corners and applying two coats of distemper oil emulsion over and including applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed.

Material and labour for complete removal of existing treatment of walls including corners and applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including applying of 1-2 mm thick wall care putty finish wall surface even and smooth complete all as specified and directed.

Material and labour for complete removal of existing treatment on ceiling and applying three coats of white wash on ceiling, off sets, pillar etc complete all as specified and directed.

Material and labour for applying two coats of Synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

Material and labour for preparation of old painted surfaces of wood of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on new or previously untreated steel surfaces of any description over 10 cm width or girth including preparation of steel surfaces complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on old painted steel surfaces/concrete surface of any description including preparation of surface complete all as specified and directed.

Material and labour for vitrified ceramic coloured tiles 8-9 mm thick dark shed (square/rectangular) polished area of each tiles not exceeding 0.72 sqm, in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

All as per item No 17 here in above but as in skirting over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Material and labour for glazed ceramic colour tiles size 300 mm x 450 mm/ 300 mm x 600mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for non skid/mat finish ceramic colour tiles of size 300 mm x 300 mm and 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6-7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

All as per item No 21 here in above but as in skirting over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Demolition of Cement concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 40mm thick PCC (1:2:4) type B1 (using 20mm grade aggregate) as in flooring finishing the surfaces even & smooth without using extra cement complete all as specified and directed.

Material and labour for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.

Material and labour for factory made pre polished rubber moulded vibromatic coloured Chequred cement concrete colour tiles of size 30 cm x 30 cm and 22 to 25mm thick, set jointed and pointed in neat cement slurry with grey cement and colour pigment to match over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified and directed.

Material and labour for heavy duty endura ceramic coloured tiles 9-10 mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for Sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed by the Engr-in-Charge.

Material and labour for providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and set in cement mortar 1:4 complete with joints to match complete all as specfied and directed.

Material and labour in repair granite 18-20mm thick of Zet Black/Telephonic Black ( table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like with approved adhesive incl pointing in coloured grout to match with shade of granite including moulding complete all as specified and directed.

Taking down chowkhats or frames with shutter exc 1.5 sqm and n.exc 4 sqm each (without taking off shutters from the frame) and removing from the site complete all as specified and directed.

All as per ser Item No 32 here-in-above but n.exc 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm and n.exc 2.0 sqm each and removing from the site complete all as specified and directed.

Supply and fix factory made 100 % solid wood plastic composite (WPC) door frame 125x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed by Engr-in-Charge.

Supply and fix 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed by Engr-in-Charge.

Supply and fix 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed.

Supply and fix Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails/ beads complete all as specified and directed.

Supply and fix 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening, as per specification and drawing complete all as specified and directed.

Supply and fix Factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed.

Supply and fix MS Butt Hinges medium weight, cold rolled mild steel 100 mm fixed to steel/wooden shutters complete all as specified and directed.

Supply and fix mild steel barrel tower bolts 150 mm size, stove enamelled black, with bright bolt complete all as specified and directed.

Supply and fix mild steel pressed handles 150 mm size stove enamelled black complete all as specified and directed.

Supply and fix mild steel sliding door bolts 'bolt type' 250 mm size stove enamelled black with and including 6 nuts and bolts complete all as specified and directed.

Supply and fix in repair 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed by the Engineer-in-Charge.

Supply and fix in repair 18 mm thick PVC board both side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed by the Engineer-in-Charge.

Supply and fix magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

Supply and fix Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed complete all as specified and directed.

Supply and fix 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed complete all as specified and directed.

Supply and fix in repairs cast iron body hydraulic door closers universal type designation No 3 suitable for door shutters of 851 to 1000 mm wide complete all as specified and directed.

Supply and fix in repair 20 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and directed.

Supply and fix for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an ecofriedly colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Dismantling of timber scantlings 40 sq cm and over in section in any position in unframed work complete all as specified and directed.

Supply and fix MS rolled sections / tubular pipes etc. as in main and cross beams, Jack rafters, balconies and railings, purlins where connected to common rafters and running rails etc. confirming to Fe-290(Grade E-165), complete all as specified and directed by Engr-in-Charge.

Supply and fix Framed work such as grills, gratings, etc. or hand rails with ends of bars (angle, hollow section) shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fix in repairs Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, cover black, closed pattern with flat bottom and mild steel chormium plated or aluminised hinging device complete all as specified and directed.

Supply and fix in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

Supply and fix in repair 10 ltr capacity PVC low level flushing cistern valveless, syphonic action type, white, with inlet, ball valve, float and handle including brackets and fixed complete all as specified and directed.

Supply and fix in repair vitreous china single piece WC of size 385 x 720 x 710 mm with UF sift close slim seat cover, hinges, fixing accessories and dual flushing cistern (floor or wall hung) complete all as specified and directed.

Supply and fix in repair Vitreous China wash hand basin, white, flat back, size 550 x 400 mm including waste coupling and waste pipe up to floor trap and fixed complete all as specified and directed.

Supply and fix in repairs 15 mm bore (with or without swan neck) Pillar cocks chromium plated brass with capstain head screwed down high pressure complete all as specified and directed.

Supply and Fixing in repairs 15 mm dia angle cock/ angle valve/ stop valves chromium plated with capstain head screwed down high pressure complete all as specified and directed.

Supply and Fixing in repairs bib cock brass chromium plated 15 mm dia with capastan head, screwed down high pressure complete all as specified and directed.

Supply and fix in repairs health faucet mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply and fix in repair Looking Mirror 5 mm thick glass of size 600 x 450 mm fixed on commercial ply wood 6 mm thick with PVC/wooden moulding beading fixed to wooden plugs with chromium plated brass screws and cup washers and fixed complete all as specified and directed.

Supply and fix in repair CP brass wall mixer with provision of over head shower complete with 15mm long bend pipe complete all as specified.

Supply and fix in repair centre hole basin mixer 15 mm dia, Brass Chromium plated complete all as specified and directed.

Supply and fix in repair sink mixer 15 mm dia, Brass Chromium plated complete all as specified and directed.

Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore including dismantling of old tubing complete all as specified and directed.

Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore including dismantling of old tubing complete all as specified and directed.

Taking down CI/AC/PVC pipes incl fittings upto 110mm dia and removing from site complete all as specified and directed.

Supply and fix PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls or laid in trenches or floors complete all as specified and directed.

Supply and fix PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls or laid in trenches or floors complete all as specified and directed.

Supply and fix PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed.

Supply and fix PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed.

Supply and fix PVC (SWR) junction single Tee equal or unequal 110 mm dia complete all as specified and directed.

Supply and fix PVC (SWR) junction single Tee equal or unequal 75 mm dia complete all as specified and directed.

Supply & fix in repair glass corner shelf suitable size made of 5 mm thick toughened glass with CP railing complete all as specified.

Supply & fix in repair front glass shelf assembly consisting of 5.5 mm thick toughened glass with CP railing and brass brackets of size 500x125 mm, complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

Supply and fix in repair PTMT Ball valves 20 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete all as specified and directed.

Supply and fixing in repair heavy duty thread type PVC water tank cover with fixing frame fixed on PVC tank with 4 Nos of screws for 500/1000 ltrs tank complete all as specified and directed by the Engr-in-Charge.

Material and labour for 20-25 mm thick machine cut Kota stone slab as in flooring/skirting over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges incl 20 mm thick screed bedding layer of CM 1:4 complete all as specified and directed.

Material and labour for providing mirror polishing on existing terrazzo/kota/udaipur green stone / marble, flooring/skirting by cutting/ grinding and polishing complete all as directed.

Supply and fix in repair hollow/solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed.

Material and labour in repair for providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width complete all as specified and directed.

Taking out & removing existing roof treatment of any description completely upto concrete surface including racking out joints, hacking for key,sweeping clean and scrubbing down with water etc to remove dust etc, complete all as specified and directed.

Material and labour for brushing neat cement slurry @ 3 Kg of cement per Sqm on cleaned roof/wall surface complete all as specified and directed.

Material and labour for rendering 10 mm thick in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement in roof surface , complete all as specified and as directed.(Note- WPC shall be measured and paid separetely.)

Supply only integral water proofing compound as per manufacturers instructions ,complete all as specified and directed.

Material and labour for Water proofing roof treatment with Polymeric water proofing membrane of weight not less than 3Kg/sqm and minimum 3mm thick, five layers with center core as 90 micron high molesuvre, high density polythene film sand witched between two layers of polymeric (Static polythene based) between laminated on both sides with 20 micron HMDPF film over a coat of hot blown bitumen with 85/25 grade @ 1.20 Kg/Sqm after priming the surface with bituminous emulsion @ 0.30 Litre/Sqm on plastered surface. Water proofing membrane should be laid with over laps 150 mm at ends and 75 mm for sides and shall be bounded uniformity by LPG torch flame over the polymeric water proofing membranes apply semi hot blown bitumen 85/25 grade @ 1.20 Kg/ sqm dusted sand over the coat of the coat @0.5 Kg/Sqm, and applying aluminium reflective paint over it complete all as specified and as per manufacturers instructions.

Supply & fix in replacement for powder coated Aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with glass 5mm thick, fixed with glazing clips, aluminium grill with mesh size 75 mm and aluminium bar 6 mm XPM type, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc, complete all as specified and directed by Engr-in-charge. Shutter Top & bottom size:- 37.50 x 15.00 x 1.60 mm Shutter inner lock size:- 37.50 x 15.00 x 1.60 mm Shutter side (Handle) size:- 37.50 x 15.00 x 1.36 mm Chowkhat bottom size:- 50.30 x 26.00 x 1.20 mm Chowkhat top & sides size:- 50.30 x 26.00 x 1.00 mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata Note: Iron grill with frame to be fixed with window (measured and paid separately)

Supply & fix for powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 83.00 x 44.45 x 1.54 mm including 5 mm thick glass/ACP Sheet complete with aluminium grill with mesh size 75 mm and aluminium bar 6 mm XPM type, rubber packing/aluminum beading etc, complete all as specified and directed. Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata Note: Iron grill with frame to be fixed with window (measured and paid separately)

Supply and fixing in replacement for Anodised aluminium powder coated window shutters with frame, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws and aluminium tower bolts etc. with 5mm thick tined coloured glass complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement for Anodised aluminum powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having two Disc or D type handle, two aluminum tower bolt 200 mm size, one brass mortice lock of 6 lever with key and one hydraulic door closure, shutter to be partly glaze with 5mm thick tinted coloured glass in upper panel and partly pannelled with 12mm thick both side pre-laminated particle board in lower panel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed. Chowkhat Frame:- 101.60 x 44.45 x 1.54 mm Shutter Vertical style:- 83.00 x 44.45 x 1.54 mm Shutter Middle Rail:- 83.00 x 44.45 x 1.54 mm Shutter Top Rail and bottom Rail:- 114.30 x 44.45 x 1.54 mm Make: (i) Anodised aluminum section: Jindal / Hindalko / Indalco (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

Taking out old damaged SGSW pipes from existing lines including necessary excavation in trenches and getting out in any type of soil, supply, laying and jointing of new SGSW pipe type 'A' 150mm dia in any length including packing under and haunching against the sides of pipes in PCC (1:4:8) type D-2 and returning, filling in disposal of surplus soil to a distance n exc 50m complete all as specified and directed by the Engr-in-Charge..

Supply and fixing in repair Pre-painted PGI 0.45mm thick galvalume sheet sunshade (area nexc 2.50 Sqm) including all necessary bolts, cleats and painted frame structure (made of 25 mm square hollow section) and including demolition of existing RCC chajja of any type if necessary, and making good surfaces in CM 1:4 with painting as required complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as specified and directed.

Material and labour point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in and including concealed rigid PVC conduit medium grade including accessories incl cutting chases etc along with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch .

All as per Item No 104 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 104 mentioned here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 104 mentioned here-in- before but One bell/buzzer point controlled by bell push complete all as specified and directed.

All as per Item No 104 mentioned here-in- before but One light point controlled with switch 2 way complete all as specified and directed.

All as per Item No 104 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 2.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

Material and labour point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in existing steel/PVC conduit with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch.

All as per Item No 110 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete all as specified and directed.

All as per Item No 110 mentioned here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete all as specified and directed.

All as per Item No 110 mentioned here-in- before but One bell/buzzer point controlled by bell push complete all as specified and directed.

All as per Item No 110 mentioned here-in- before but one two way point controlled with switch 2 way complete all as specified and directed.

All as per Item No 110 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete all as specified and directed.

Supply and fix in repair Switch piano flush type single pole one way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix in repair Switch piano flush type single pole two way 230 Volts 6 Amp complete all as specified and directed.

Supply and fix in repair Socket outlet 3 pin , 230 Volts 5/6 Amps multipurpose 5 pin complete all as specified and directed.

Supply and fix in repair bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed.

Supply and fixing in repair Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type ISI marked with valid CML No complete all as specified and directed.

Supply and fixing in repair switch piano flush type, single pole, one way, 230 Volts 15/16 Amps marked with valid CML No. complete all as specified and directed.

Supply and fix in repair stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts complete all as specified and directed.

Supply and fix in repair anglurar Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing in repair ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

Supply and fix in repair calling bell type AC 230 Volt single pole complete all as specified and directed.

Supply and fix in repair LED tube light fitting batten type all in one single phase 18/20 W with lamp 6500/4000 K complete pre-wired all accessories complete all as specified and directed.

Supply and fixing in repair LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete all as specified and directed.

Supply and fixing in repair for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 6 Sq mm as current carrying conductor and one run of 6 Sq mm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified incl taking down old u/s sub main. Note:- Three runs of wire and one run of pipe shall be measured as one meter only for payment purpose.

Supply and fix in repair Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 63/100 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete all as specified and directed. Note:- DB and MCCB/MCB shall be of same make

Material and labour for Distribution board TPN DB 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar complete all as specified and directed.

Supply and fix in repair MCCB 415 Volts, 160 Amps, rating 4 Pole (triple pole and neutral), adjustable Thermal Magnetic release (Service Breaking Capacity 16KA (Ics=100%Icu)-05 Nos complete all as specified and directed.

Supply and fix , MCB TPN 40 to 63 Amps, 240 Volts having braking capacity 10 KA complete all as specified and directed.

Supply and fix in repair Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection. Note:- DB and MCCB/MCB shall be of same make

Supply and fix in replacement MCB combo box with steel enclosure with one single pole MCB 20 Amp 10 KA C series suitable for AC/geyser etc complete all as specified and directed. Make :- Havells Model cat part No DHDMCSN0151020 or Legrand/C&S/ABB.

Supply and fix in repair SP 6 to 32 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fix in repair SPN 25 to 63 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

BHARAT CONSTRUCTION

Alankar Traders

ANANYA CONSTRUCTION CO.

Asian Builder

VERDHMAN ASSOCIATES

AYUSH CONSTRUCTION COMPANY