PROVN OF CHAIN LINK SECURITY FENCING FOR VET HOSP AND CERTAIN REV WORK AT SUNDERBANI UNDER GE NORTH AKHNOOR

Amount

Excavation in post holes ( or similar holes) in any type of soil, each not exc 0.50 cum, getting out, removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified.

Mild steel work conforming to Fe 290 Gde E-165 as in posts and struts etc in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work complete all as specified and as directed by Engineer-in-Charge.

Cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified.

Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified.

Mild steel flat iron work as in bands supports or stay for rain water ventilating pipes, including bolts if required hooks heay for large gates hook and pintel hinges plain angle cleats confirming to FE-290 Gde E-165 all as specified and directed.

Chain link fencing of oblong wire mesh size 100x100mm with weight not exc 4 Kg/Sqm all as directed (Note - Dia of main bar 4mm and cross bar 4mm)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts etc including provission of binding wire and fixing with MS angle iron fencing posts complete all as directed.

Mild steel 10mm dia bars as in posts and struts in fencing including cutting top to shape as direct, drilling holes, notiching for wire etc incl welding, (for securing wire mash etc) incl all necessary drilling bolting or reveting,etc and similar work conforming to Fe290 complete all as specified.

Mild steel screw bolt(machine made) with hexagonal or square heads at one end screwed the other or screwed both ends each screwed end to be fittedwith washers and one hexagonal or square nut exc 5 cm and n exc 10 cm long (11 to 15 mm dia.) complete all as specified

Galvanised 2 strand, steel barbed wire 2.24 mm dia, barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to mild steel fencing posts, any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel nibs, pins complete all as specified and as directed. Note : Each line of barbed wire to be measured seperately.

Preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and apply two coats of Synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

PCC 1:2:4 type B-1, using 20 mm graded as in walls orretaining walls any thickness size or shape including pilasters, buttresses columns pillars boundary pillars and posts (including caps and bases) bed block all as specified.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil as directed by Engineer-in-Charge.

Cement concrete 1:5:10 type E-2 (using 40 mm graded crushed stone aggregates) as in foundation filling and mass concrete complete, all as specified.

Precast cement concrete interlocking tiles/paver block confirming to IS 15658-2006 machine pressed of approved shape and size in M-35 grade and 60mm thick with gray cement and pigment laid and bedded on 25mm thcik sand cushioning all as specified and directed by Engr-in-charge.

PCC type C-I 1:3:6 (using 20mm graded aggregate ) as in coping Kerbs water troughs and the like including weathering slightly rounded or chamfered angles and throating as directed by Engr-in-charge.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in for any type of soil, all as specified.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, all as specified.

Brick work with Sub Class ‘B’ burnt bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete, all as specified.

25mm thick cement concrete type B-1 using 1:2:4 using 20mm graded aggregate as in sub flor complete all as spd.

Machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade or the slab including rubbing and polishing complete including 15 mm thick in CM 1:6 screed for laying Kota Stone complete all as spd.

Ditto all as per item No. 22 but as in riser of steps ,skirting, dado and pillar including 10 mm thick in CM 1:4 rendring for Kota Stone complete all as spd.

Non skid ceramic tiles 7 to 8 mm thick(square/ rectangular) Grade B IIa area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, coloured as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in cement and sand mortar 1:4 complete all as spd.

Glazed ceramic tile 300 x 200 x 07mm thick (coloured) conforming to IS:13712 of 1993 on vertical surfaces such as dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick screed bed in cement and sand mortar 1:4, complete al as spd.

Reinforced cement concrete M-25 (Design Mix) (using 20 mm graded aggregate) as in plinth band foundation including rafts, footing foundation beams plinth beams, bases for columns etc basement slabs under reamed piles and mass concrete complete all as specified.

Reinforced cement concrete M-25 (Design Mix) (using 20 mm graded aggregate) as in slab supported on walls, beams and columns in floors roofs landings balconies canopies deck slab and in the shelves and the like complete all as specified.

TMT reinforcement bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer -in-Charge.

Ditto all as per item No. 28 but 6 to 8mm dia.

Formwork to rough finished surface of finished concrete sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including rough finished surafaces of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc all as specified & directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces.

Formwork to edges of concrete in floors and slab n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 05cm but n exc 10cm wide, complete all as specified.

Rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces as in ceiling, including finishing the surface even and smooth without using extra cement complete all as specified.

Rendering 10 mm thick in cement and sand mortar 1:4 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

Preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 as specified and as directed by Engineer-in-Charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 as specified and as directed by Engineer-in-Charge.

Steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and as directed by Engineer-in-Charge.

Glazing with figured glass (Frosted), pin head type, 3mm thick, and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.

Aluminium handles anodised of size 150 mm long ISI marked complete all as specified and as directed by Engineer-in-Charge.

300 mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete.

200 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed by Engineer-in-Charge.

PVC floor traps dia meter of outlet 75 mm with grating including jointing to waste pipe with solvent cement complete all as specified.

Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified.

Vitreous china bowl urinal flat back, size 465 x 355 x 265 mm, white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement martar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing against urinal back in cement all as specified and as directed.

Vitreous China squatting pan “Orissa pattern” size 580x440 mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc, complete all as specified and as directed by Engineer-in-Charge.

Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) white as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonice pipe etc. complete with fixing bolts and chromium plated flush pipe, 32mm dia, plastic water closet seat cover and best quality of chromium plated jet complete set, complete as directed.

Vitreous china wash basin, white, flat back, size 550x400mm including chromium plated brass waste fittings steel chain and rubber plug, including waste pipe porcelain stopper, a pair of CI brackets, complete all as specified and as directed by Engineer-in-Charge. Notes : - (i) The wash- basins shall be ISI marked, Ist quality. (ii) Waste pipe shall be of 32mm bore, low density polyethylene pipe (LDPE) of pressure rating 6 Kg-f/cm2 and of the required length to suit the site requirement all as required and ordered. (iii) The rate quoted shall be deemed to including cutting holes for new brackets and supplying and fixing new WHB with new fittings and new C.I. brackets and also P.C.C. blocks of P.C.C. 1:2:4 type B-1 using 20 mm graded stone aggregate of size 10cm x 7.5cmx15cm for fixing brackets.

PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets and PVC bend pipe 90 cm long 32mm dia, complete all as specified and as directed by Engineer-in-Charge.

Salt glazed stoneware gully trap square or round mouthed type 'P' of size 150x150 complete all as specified.

Salt glazed stoneware (SGSW) grade 'A' drain pipes 150mm bore laid and jointed on concrete bed, complete including testing etc. all as specified.

Dismantling water tanks exc 250 ltr but n.exc 500 ltrs capacity and removing to store complete.

Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge.

Ditto all as per item No 56 but 1000 litres capacity.

Taking up or down steel tubing and connections 15mm bore, complete all as specifed & directed.

Taking up or down steel tubing and connections 20mm bore, complete all as specifed & directed.

15mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

Fixing only 15mm GI tubing and connection in new or old position(walls, ceiling and floors etc) including all fittings all as specified and directed.

20mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

Fixing only 20mm GI tubing and connection in new or old position(walls, ceiling and floors etc) including all fittings all as specified and directed.

Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed in repairs complete all as specified

Stop valves, cast copper alloy, 15mm bore, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.

Steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 (vertical posts-100mm bore, purlins and rafters-80mm bore) complete all as specified & directed.

Roller sections as in main and cross beams hip and jeck rafters purlins where connected to common rafters and running rails and guides or framing for cladding conf to Fe-290-(gde-E-165) all as spd and directed.

Pre-painted galvalume aluminum zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in as in ridges, hips, valley gutters, drip and straight flashings, fixed with self tapping screws, complete all as specified & directed.

Mild steel flat irom wind tie hold fasts clamps etc similar small articles conforming to Fe-290 Gde-E-165

Cutting holes in stone masonry walls built in cement morter for inserting hold fasts etc and making good dismantled portion in CM 1:3 or PCC1:2:4 type B-1 as required depth of embedded portion of hold fast exc half brick but n.excone brick complete all as directed by Engr-in-charge.

Preparing new surfaces, plastered or unplastered walls and applying two coats of cement base paints over one coat of primer all as specified and directed.

Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n exc 1.5 Sqm each ,complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm and n.exc 4.00 Sqm each ,complete all as specified.

Demolition of stone/brick masonary built in cement/ cement lime mortar complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level.

Supply only integral water proofing compound.

50mm thick PCC in 1:2:4 type B-1 with using 20mm graded stone aggregate in floor all as spd.

Taking down carefully, copper / aluminium conductor unserviceable / perished point wiring (any type) for light/ fan/ light socket or power socket etc complete with fittings such as switches, sockets, ceiling roses, pendant holders, bracket holder, light fittings, regulators etc, including making good to disturbed surfaces of wall/floor etc, complete, all as specified & directed.

Point wiring with multi stranded FRLS PVC insulated unsheathed copper conductor cable single core of 1.5 Sqmm drawn into and including PVC concealed conduit 'ISI marked' of 20mm dia medium grade as required, fixed in concealed surface of wall/ceiling including cutting chases as required, terminated in MS sunken box suitable for housing of switches, socket, regulator etc, covered with 3mm thick bakelite 'hylam' laminated sheet cover complete with all accessories including single core FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm for earth continuity conductor (green colour) and connected to earth dolly for one light/fan point controlled by one way switch, complete all as specified & directed.

All as per Srl item No. 81 here-in-before but for one 3/5 pin 5 Amps socket outlet on independent board.

All as per Srl Item No 81 here-in-before but for one socket outlet 05 Amps on the same board

Point wiring with multi stranded FRLS PVC insulated unsheathed copper conductor cable single core of 2.5 Sqmm drawn drawn into and including PVC concealed conduit 'ISI marked' of 20mm dia medium grade as required, fixed in concealed surface of wall/ceiling including cutting chases as required, terminated in MS sunken box suitable for housing of switches, socket, regulator etc, covered with 3mm thick bakelite 'hylam' laminated sheet cover complete with all accessories including single core FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm for earth continuity conductor (green colour) and connected to earth dolly for one 3/5 pin socket outlet 15 Amps independent, complete all as specified & directed. Notes for Srl Item No. 81 to 84 (i) Unit rate includes for cutting chases whereever required and sinking for boxes, making good to walls / floors etc., complete, including white wash / colour wash as directed. (ii) Uniform coding of wiring i.e red / yellow / blue for phase black for neutral and green for earth is to be maintained.

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified & directed.

Switch piano flush type 6 Amps 240 Volt, single pole one way, complete all as specified & directed.

Switch piano flush type 16 Amps 240 Volt, single pole one way, complete all as specified & directed.

Socket outlet two in one, 5 pin type, 5 & 15 Amp, flush type universal, complete all as specified & directed.

Socket outlet two in one, 5 pin type, 5 Amp, flush type universal, complete all as specified & directed.

Sheet metal enclosure for flush/surface mounting distribution board, factory made and tested complete protection class IP-36, suitable for mounting MCBs, single pole & neutral, 240 volts with 100 amps rated copper bus bar & neutral link earthing stud, 8 way, complete all as specified & directed.

Ditto all as per item No 90 but 4 way.

Ceiling rose surface type, bakelite 65mmx50mm, 3 terminals, complete all as specified & directed.

XLPE insulated, armoured heavy duty electric cable (heavy duty) with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 2 core connected with suitable cable gland and aluminium lugs, laid in trenches or passing through pipes including testing, complete all as specified and directed. (Earth work, brick protection and sand cushioning shall be measured and paid for separately)

Ditto all as per item No 93 but size 10 Sqmm 2 core.

Galvanised iron tube 32mm bore light grade (ISI marked) for cable protection to poles/under floor/under roads/alongwith walls complete including sealing of pipe ends with approved sealing compound, complete all as specified and directed.

Sand cushioning to under ground cable, laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete punned to 18cm, complete all as specified and directed. Note:- Punned thickness of sand will be measured and paid.

Brick well burnt locally available sub class 'B' laid over sand cushioning for mechanical cable protection in trenches with width of brick perpendicular to the length of cable, complete all as specified & directed.

Single phase exhaust fan double ball bearing heavy duty motor with protective bird guard of size 300mm sweep, 230 Volt 50Hz fixed on wall by grouting nuts, bolts and washer of suitable size including connecting up with three core flexible copper stranded conductor cables from fan to ceiling rose complete all as specified and directed by Eng-in-charge.

Surface & wall mounted, LED tube light fitting, 20W, glare free, smooth light distribution, 230v, box type, epoxy powder coated CRCA sheet housing with reflector cover channel, aesthetic looking end cap and HPF LED driver with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified & directed. Make. Havells, Cat Part No. ENDURALINEARNEOBS20WLED 865SPCWH or equivalent in Philips/ Crompton/ Bajaj/ Wipro/ Syska Led/ GE Lighting/ Surya

Energy saving 10W LED bulk head luminaires, IP-65, oval shape, surface mounted with all other accessories prewired and making connections with copper flexible twisted twin cord of appropriate gauge and length,230v, 50Hz including taking down old unserviceable fitting including taking down old unserviceable fittings, complete all as specified & directed. Make. Havells, Cat Part No.RUGBYNEONFT10WLED760SSYMBOPC or equivalent in Philips/ Crompton/ Bajaj/ Wipro/ Syska Led/ GE Lighting/ Surya

LED lamp in white colour of 12 watt, base Cap B-22, complete all as specified & directed.

MCB, single pole & neutral, 6 to 32 Amp, AC, 10 KA repturing capacity, 240 Volt, 'C' series, complete all as specified & directed.

MCB, single pole, 6 to 32 Amp, AC, 10 KA repturing capacity, 240 Volt, 'B' series, complete all as specified & directed.

Earthing of galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr depth below normal ground level) with top edge of earth not less than 1.5 mtr below normal ground level, surrounded on all sides by 150mm thick charcoal & common salt starting from ground below earth plate upto 150mm above GI plate in alternate layers connected to and including earth lead wire 4.0mm (8SWG) by means of steel bolts, nuts, check nuts and washers, test point made of GI strip 40x8mm, 10cm long PCC 1:2:4, type B-1 in pit with precast RCC 1:2:4 type B-1 in cover reinforced with XPM not less than 4 Kg per Sqm with 15mm bore GI light grade protection pipe, 20mm bore GI medium grade watering pipe with funnel including charcoal, dust, salt, all as shown in electrical plate No 3 of SSR Part-I (2009) complete with necessary earth work in any type of soil, removal to a distance not exceeding 50 mtr, including testing on completion, complete all as specified & directed. Note : (a) The cost of earth work, PCC pit of size shown in electrical plate No.3, funnel, watering pipe, wire mesh, charcoal, dust, common salt, 20mm bore medium grade watering pipe & 15mm bore light grade GI pipe as protection to earth lead wire etc shall be deemed included in the unit rate for earthing. (b) After completion, during testing, if the earth resistance equal or less 2 ohms is not obtained, earthing will be regenerated at no extra cost till the desired earth resistance is obtained.

M/s Mool Raj Romesh Chander

ASIA ENTERPRISES