COMPREHENSIVE REPAIRS TO PLUMBING FITTINGS SANITARY FITTINGS REPAIRS TO OLD TANKS AND FITMENTS INCLUDING OTHER MISC BR WORKS AT VARIOUS LOCATION OF BARAMULLA UNDER GE 969 EWS

Amount

Demoliton of cement concrete (un-reiforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

M&L for 25 mm thick PCC type B1 (1:2:4) using 20 mm graded agg as in flooring, complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type C-2 using 40 mm graded aggregate as in sub base, complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection finished even and smooth w/o using extra cement, complete all as specified and as directed.

M&L for non skid coloured printed ceramic tile 8 to 10 mm thick ( Square/rectangular/in joint less) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L Sand filling under floors or in foundations, including watering and consolidation, complete all as specified and as directed.

M&L Machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pegment, complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm thick screed bed in CM (1:4) for laying floor finishes, complete all as specified and as directed.

Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of the permishes, complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface 600x300x8-10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4) complete all as specified and as directed.

Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar, complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6), complete all as specified and as directed.

M&L Walling of random rubble masonry uncoursed built in CM (1:6), complete all as specified and as directed.

Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc.

M&L ror rendering 15 mm thick plastering on brick work or concrete surface in CM (1:6) and rendering is to be finished even and smooth w/o using extra cement, complete all as specified and directed.

Preparation of newly plastered surfaces walls and applying two coat of OBD, complete all as specified and as directed.

M&L for complete removal of existing treatment of surfaces and applying two coat of oil bound distempering with emulsion on walls over a coat of Chalk whiting, on plastered surfaces, preparatory to distempering, complete all as specified and as directed.

S&F in repair 2nd class softwood in scantling clean swan timber framed and fixed to the position including dismantling, complete all as specified and as directed.

Dismantling timber scantlings in fillets, rails,posts rafters,purlins etc under 40 sqcm in section unframed work, complete all as specified and as directed.

M&L for plain fillets square rectangular or triangular in section using 2nd class soft wood clean sawn secured with nails exc 13 but n. exc 25 sqcm in section complete all as specified and as directed.

M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean sawn secured with nails exc 3 but n.exc 6 sqcm in section, complete all as specified and as directed.

Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets any thickness inlcuding cover fillets, complete all as specified and as directed.

S&F 5 mm thick insulation consisting of PVC Insulated Panels as in wall having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall including L/U shape edge profile and base/support for fixing in wall surfaces complete all as specified and directed. Note : Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium)

S&F 5 mm thick insulation consisting of PVC Insulated Panels as in ceiling having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted in ceiling including L/U shape edge profile and base/support for fixing complete all as specified and directed. Note : Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium)

M&L 6 mm thick Plywood on wall panellingg, grade BWP,type BB, fixed with nails to timber frame work complete all as specified and as directed.

M&L 6 mm thick Plywood in ceiling, grade BWP,type BB, fixed with nails to timber frame work, complete all as specified and as directed.

M&L of 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) in ceiling, fixed with nails to timber frame work, complete all as specified and as directed.

M&L of 6 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) on wall, fixed with nails to timber frame work, complete all as specified and as directed.

S&F 2nd class soft wood 15 mm thick and 100 mm wide plane one side with edges tounged and groove or rebated joint as in wall panelling fixed with nail complete all as specified and as directed.

S&F 2nd class soft wood 15 mm thick and 100 mm wide plane one side with edges tounged and groove joint as in ceiling panelling complete all as specified and as directed.

S&F wooden wall panelling / ceiling with tongued & grooved joint laminated over high quality DHF 8 to 10mm thick including fixed to timber frame work including using thermacol in flooring,complete all as specified and as directed.

M&L for french polishing on surfaces of any descreption, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with one or more coats, complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coataing GI based profile steel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw incl dismantling, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling, complete all as specified and as directed.

S&F galvanised,corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with coach screw and washers in roofs, walls etc incl dismantling, complete all as specified and as directed.

S&F 0.80 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings(length and girth as fixed) with grade of zinc coating 120 gm incl dismantling, complete all as specified and as directed.

M&L two coat of synthetic enamel paint over a coat of red oxide including preparation of new steel Surfaces of any description, over 10 cm in width or girth,not otherwise described, complete all as specified and as directed.

M&L one coat of synthetic enamel paint including preparation of old steel Surfaces of any description, over 10 cm in width or girth,not otherwise described complete all as specified and as directed.

Taking down of Shutters of any description n exc 1 sqm each, complete all as specified and as directed.

Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each, complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 sqm, complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 Sqm, complete all as specified and as directed.

S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.

S&F Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed.

S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b), complete all as specified and as directed.

S&F Door closer hydraulically regulated cost iron body designation No 1 universasl type suitable for door shuutters up to 700 mm in width and of weeight not more than 35 kgs, complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed, complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F Aluminium handles 100 mm , cast type, anodised, complete all as specified and as directed.

S&F Aluminium handles 150 mm , cast type anodised, complete all as specified and as directed.

S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring.Complete all as specified and as directed.

S&F in repairs brass chromium plated Towel Rack 600mm long complete all as specified and directed. Make - Jaquar Cat Part No CAN-1181N or equivalent in Cera, Hindware complete all as specified and as directed.

S&F in repairs brass chromium plated Tumbler holder complete all as specified and directed. Make - Jaquar Cat Part No CAN-1141N or equivalent in Cera, Hindware complete all as specified and as directed.

S&F in repair table mounted china ware wash hand basin. Make - Jaquar Cat Part No JDS-WHT-540 or equivalent in Cera, Hindware complete all as specified and as directed.

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutter and glazing fixed with and incl 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips, frame made with aluminium box sec complete all as under :- (a) Door Frame - 100mmx44mmx1.48mm thick (b) Shutter - Middle & Lock rail - 150mmx44mmx1.48mm thick (c) Shutter - Bottam Rail - 150mmx44mmx1.48mm thick (d) Shutter - Top rail - 85mmx44mmx1.48mm thick (e) Aluminium beading / clip - 0.7mm thick (f) Aluminium Handle `D' Type 150mm long, aluminium twoer bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 lever, aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty (Make : Sandhu ISI market or its equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

S&F aluminium alloy powder coated aluminium sliding windows three track with movable shutters (slinding on minium two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50mm thick glass & stainless steel wire mesh fixed with neoprane rubber gasket with aluminium beading clips, frame made with aluminium section as appended below :- (a) Window Frame - 75mmx35mmx1.48mm thick (b) Top/Bottom rail and style/rail of shutter - 38mmx19mmx1.48mm thick and over (c) Aluminium beading /clips - 0.7mm thick (d) Stainless Steel wire cloth 0.45mm nominal dia of wire and average width of aperatuyre 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium fire staples complete. (e) Aluminium fittings such aluminium suitable handle with auto interlocking closing. (f) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F in repair vetreous half stall urinal sensor type, flat back, white, with grating and union for discharge pipe incl waste coupling, PVC waste pipe, urinal spreader, PVC connection, fixed with all accessories complete all as specified and as directed.

S&F in repairs venetian blind (zebra blind) coloured strip 75mm top 5mm thick powder coated aluminium rod ends at brackets are moulded type etc complete all as specified and as directed.

M&L two coats of synthetic enamel paint over and incl a coat of pink primer including preparation of surface on new wooden sruface over 10 cm width or girth . Complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed.

S&F Softwood 2nd class Plan one side with butt joints eaves boards 20 mm thick, complete all as specified and as directed.

M&L softwood 2nd class Weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed.

S&F 25 mm thick 2nd class soft wood Planed one side & edges tongued and grooved or rebated, with nails in flooring and skirting, complete all as specified and as directed.

M&L for preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic varnish all as specified. Complete all as specified and station policy or directed by engr-in-charge.

M&L two coats of synthetic enamel paint including preparation of surface on old wooden sruface over 10 cm width or girth complete all as specified and as directed.

Taking down and replaced with 15 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed to walls/ceilings, complete all as specified and as directed.

Taking down and replacement 20 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors, complete all as specified and as directed.

Taking down and replacement 25 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors , complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed.

M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 ltrs to 500 Ltrs complete all as specified and as directed.

S & F in repairs 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle fancy type, screwed both ends for iron pipe or for unions and fixed , chromium plated, complete all as specified and as directed.

S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe, complete all as specified and as directed.

S&F in repairs for 15 mm bore in repair bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule, complete all as specified and as directed.

S&F in repair stop valves fancy type chromium plated screwed down high presure , with crutch or butterfly handle, cscrewed both ends for iron pipe or for unions 15 mm bore, complete all as specified and as directed.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern ) incl flush pipe 60 cm long, complete all as specified and as directed.

S&F in repair vitreous chine wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl braxkets with waste fittings and connection pipe etc including pedestal, complete all as specified and as directed.

S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed, complete all as specified and as directed.

Supply and Installation of Modular kitchen with ten-dom box and 1 paintery and G profile handels hydraulic accessories frame work to be done in 18mm HDHMR both side laminate water resistant brand (ELDERWUD) complete all as specified and as directed.

S&F PVC connection pipe 15 mm size with PTMT nuts of length 450mm fixed to GI tubbing, complete all as specified and as directed.

S&F Sheet glass thickness 4 mm, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane including hacking out old brioken glass, complete all as specified and as directed.

S&F Sheet glass thickness 4 mm,ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 cm long between flages complete all as specified and as directed.

S&F in repairs corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard complete all as specified and as directed.

S&F in repairs Brass CP wall mixer 15 mm for mixing hot & cold water screwed down for iron pipeand fixed, complete all as specified and as directed.

S&F in repairs curtain rod, mild steel, chromium plated fixing with stainless steel brackets and funnels stops, rollers etc, complete all as specified and as directed.

S&F in repairs Rat tail mild steel (helical) door spring 300 mm long fix/welded with chowkat, complete all as specified and as directed.

S&F in repairs Single piece WC with UF soft closet, seat cover , hinges, fixing acessories including flushing cistern sizee (370x690x795mm) including S trap 300mm, health faucet and jet spray complete all as specified and as directed.

S&F in repairs CP health flucet (ABC) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl making connection and fixed in position completed in all respected as specified, complete all as specified and as directed.

S&F in repairs CP jet spray with flexible tube 1.5 mtr long complete all as specified and as directed.

S&F in repair PP-R gate valves 32mm dia (brass insert) as per requirement of the site, complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.

S&F in repairs Vitreous China Urinal, Half stall type, white including flushing cistern, flush pipe and waste pipe, complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs 20 mm Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples, complete all as specified and as directed.

S&F in repairs Brass CP basin mixer 15 mm for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

S&F in PVC (SWR) junction single T equal or unequal 110 mm dia, complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm dia fixed complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

S&F in PVC (SWR) junction single T equal or unequal 75 mm dia, complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm dia fixed, complete all as specified and as directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified.

S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant rade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady the frame complete as specified by the manufacturer and as per directions of Engineer-in-charge.

S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

M&L Creosote preparing surfaces of wood and wood based materials, and wood based materials, new or old, of any description and girth, not otherwise described and treated with, complete all as specified and as directed.

Note:- Schedule of credit Rs. 79,120.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S HAJI MOHD ASHRAF SUMJI

M/S DAR ELECTRICALS

HAYAT TRADING CORPORATION

M/S GHULAM RASOOL LONE