Construction of Govt Sen Sec School Building at Devdhar in Tehsil Chachiot Distt Mandi SH C/o Building portion WS and SI Septic tank soak pit and harvesting system

Amount

Cutting in earth work all kinds of soils and disposal of excavated earth upto a lead of any metres such as pick work , jumper work, pick work,pick jumper blasting work, blasting work in soft and hard rock conglomrate rock or saturated soil and its intermediate classification of soil including chiseling/wedging out of rocks (where blasting is prohibited) and pumping or bailing out of watering/dewatering upto any lift stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in layers when required into plinth sides of foundations consolidation each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in charge within any leads including carriage of materials with in all leads, lifts and other incidentals.

Earth work in excavation for structure as per drawing and technical specification clause 305.1 i/c setting out construction of shoring and bracing removal of stumps and other deletarious material and disposal up to any lead dressing of sides and bottom and back filling in trenches with excavated suitable material ordinary soil. with in all leads and lilfts and carriage of materials and other incidental complete. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Excavation in foundation, trenches etc. in earth work in all kinds of soil such as pick work, Jumper work, blasting work in soft and hard rock, conglomerated rock or saturated soil and its intermediate classification of soil, chieseling work and wedging out rock (where blasting is prohibited) and pumping or bailing out watering/dewatering upto any lift, stacking the excavated soil upto any lead from the edge of excavation and then returning the stacked soil in layer when required into plinth, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals .

Excavation in drain and channels etc. in earth work in all kinds of soils such as pick work, jumper work, pick jumper work , pick jumper blasting work , blasting work in soil and hard rock conglomerate rock or saturated soil and its intermediate classification of soil including chiseling/wedging out of rocks (where blasting is prohibited) and pumping or bailing watering/dewatering including dressing of sides and bed and disposing of excavated earth upto any leads and lifts disposted earth to be leveled and neatly dressed as directed by the Engineer-in charge within any leads including carriage of materials with in all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm(Three point fifteen millimeter) thick welded with angle iron in frame 30x30x5mm(Thirty millimeter into thirty millimeter into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and bellies in any height of propping and centering below supporting floor to ceiling upto floor all level and removal of the same for in situ-reinforced concrete and pain concrete work including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . Foundation, footing basis of columns etc. and mass concrete .

Flat surfaces such as soffits of suspended floors, roofs, landings and the like Floors etc upto any thickness.

Beams, cantilever, girders and lintels sides and soffits of beams, beam hunching, cantilevers, bressumers and lintels in any depth in all height from floor..

Columns, pillars, Posts and struts, Square, rectangular or polygonal in plan

Stair cases with sloping or stepped soffits excluding landing

Edges of slabs and breaks in floors and walls in any width.

filling in plinth with sand under floors including watering ,ramming, consolidating and dressing complete. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying mechnically mixer cement concrete 1:4:8 (1 cement: 4 sand : 8 graded stone aggregate 40 mm (fourty millimetre nominal size ) and curing complete including cost of form work in: Foundation and plinth ,including carriage of material up to all leads and lifts and as per direction of Engineer in charge.

Providing and laying concrete for plain /reinforced concrete 1:4:8 (1 cement: 4 sand : 8 graded stone aggregate in open foundation complete as per drawing and techinal specification claused 802,803,1202 and 1203. including carriage of material up to all leads and lifts and as per direction of Engineer in charge.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm (fourty millimetre) nominal size and curing complete excluding cost of centring and shuttering in foundation and plinth including carriage of material up to all leads and lifts and as per direction of Engineer in charge.

Providing and laying concrete (C.C 1:6:12) (one cement : six sand twelve graded stone aggregated) for plain/reinforced concrete in open foundation complete as per drawing and technical specification Clause 802,803,1202 and 1203 including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in Charge.

Providing and laying mechanically mixed and vibrated cement concrete 1:1.5:3 (1 cement: 1.5 sand : 3 graded stone aggregate 20 mm (Twenty millimetre) nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced concrete in suspended floor roofs ,landing carriage and shelves and their supports balconies beams , girders , bressumers and cantilevers . including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Random Rubble Stone masonry in cement mortar 1:6 (one cement : six sand) for substructure complete as per drawing & technical specification Clauses 702,704,1202 and 1203 including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying reinforced cement concrete M-design mix 25 (twenty five) grade mechanically mixed and vibrated and curing complete excluding cost of form work reinforcement for reinforced cement concrete work in all leads & lifts. The mix shall be designed as per requirement of IS code and PWD specification. The design mix will be got approved from the Engineer - in - charge prior to the casting. The theoritical consmption of cement for the item shall be worked out as per approved design mix as per IS code. including carriage of materials with in all leads, lifts and other incidentals. Foundations,footings bases of columns and the like and mass concrete.

Suspended Floor roofs, landing and shelves and their support balconies, beams,girders, bressumers and contilever upto all floor level.

Columns, pillars posts and struts etcupto all floor level.

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto all floor level.

Providing and laying upto first floor two level reinforced cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm(twenty millimetre) nominal size) to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in Mouldings as in cornices windows, sills etc. not exceeding 15cm (fifteen centimetre) in girth including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire up to any level including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying Damp Proof Course 38mm (thirty eight millimtre) thick with cement concrete 1:2:4 (1 cement: 2 sand : 4 graded stone aggregate 12.5 mm (twelve point five millimetre) nominal size ) and curing complete.including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying a coat of hot bitumen (mexphalt 80/100 or equivalent) using 1.70 kg (one point seventy kilogram ) per square meter damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Stone filling dry hand packed in under floor as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals .

Construction of dry rubble dry stone masonary for retaining walls, breast wall, revetment walls and parapets etc.for sub structureand super structure complete as per drawing and technical specification clauses 704.6 and 1302.5 as per entire satisfaction.including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Back filling behind abutment, wing wall and retaining wall complete as per drawing and techanical specification clause 1204.3.8 including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm (twenty millimetre) nominal size) at plinth level in Cement Mortar 1:6(1 cement:6 sand) including curing and carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Brick work using Second class common burnt clay building bricks in cement mortar 1:4 (One Cement : Four Sand) rat trap bond in super structure to all floor levels . including carriage of material up to all leads and lifts and as per direction of Engineer in charge. upto floor all level.

Brick work using common burnt clay building bricks in super structure to all floor level in cement mortar 1:6 (One Cement : Six Sand) including curing complete and carriage of material up to all leads and lifts and as per direction of Engineer in charge. Upto floor all level.

Half brick masonry in common burnt clay building bricks in Super structure above plinth level to all floor level (2nd Class Bricks):Cement mortar 1:4 (one cement : four sand) including curing and carriage of material up to all leads and lifts and as per direction of Engineer in charge.

Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position 2nd class deodar wood complete as per specification and including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and Fixing 25 mm (Twenty Five millimetre) thick prelaminated MDF board both side prelaminated of approved shade and quality exterior/interior grade panalled shutters with frame of second class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm (forty millimetre) thick frame. including black enamelled M.S. butt hinges including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing glazing in wooden door, window, ventilator shutters and partition etc with wooden corner or wooden bead etc. of specified size with nails mitred and jointing complete and glazing with glass panes of 5 mm (five millimetre) thickness including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing panelled glazed or panelled and glaze shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws etc. 40mm (fourty millimetre) thick 2nd class klin Seasoned Deodar wood.And extra superior type of glass panes 5.5 mm (five point five millimetre) thick in glazed or panneled and clerestory window as per specification and including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 2nd class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm (zero point fifty six millimetre) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screw etc complete as per specification and as per the directions of Engineer-in Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 250x16mm (Two hundred Fifty into Sixteen millimetre) aluminium sliding door bolt and nuts screws etc. complete. as including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing aluminium touher bolt and nuts screws etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . 250x10mm(Two hundred Fifty milimetre into ten milimeter )

200x10mm(Two hundred milimetre into ten milimeter )

150x10mm(One hundred Fifty milimetre into ten milimeter )

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . 125mm (One hundred twenty five milimetre)

100mm (One hundred milimetre)

Providing 40x3 mm (fourty into three millimetre) flat iron hold fast 40cm (fourty centimetre) Long including fixing to frame with 10mm (ten millimetre) diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimetre)1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm (twenty millimetre) nominal size. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 100mm (One hundred millimeter) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 150 mm (one hundred fifty millimetre) bright finished hard drawn hooks and eyes. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 12 mm (Twelve millimetre) thick and 100mm ( One hundred millimetre) wide palmet with 25mm (twenty five millimetre) diameter wooden curtain rod and brackets including fixing with 25x3mm (twenty five into three millimetre) M.S flat 10 cm (ten centimetre) long and plugs in 1st class deodar wood. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge.

Providing and fixing Plain M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge.

Providing and fixing 75 mm x 60mm (seventy five millimetre into sixty millimetre) rounded hand rails in straight length complete in 2nd class deodar wood. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 8mm (eught millimetre) thick fibre cement board ceiling of approved quality of everest or equivalent with buttjointing and nail. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 19 mm thick (Nineteen millimetre thick) water proof termite resistant commercial board box including shelves and shutter ,the back side of cupboard/cabinet shall be of 8 mm (eight millimetre ) thick ply and all the cut portion of shutter from all the sides shall be finished with 6 mm (six millimetre ) thick hard wood edging. The shutter from outside shall be finished with 1 mm thick lamination of approved shade including piano hinges and magnetic catcher with in all accessories etc. complete as per detailed architectural drawing no. 195/1 to 199/1including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying Fully body glazed vetrified tiles matte finish 600x600mmx10mm (six hundred into six hundred millimetre into ten millimetre) in approved shade with granite boarder in flooring, treads of steps and landing laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry mixed with pigment of required shade to match the shade of tiles complete. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying fully glazed vetrified tiles matte finish 8mm (eight millimetre) thick in required shade in skirting risers of steps and dados on 10mm (ten millimetre) thick cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry mixed with pigment of required shade to match the shade of tiles complete. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

White glazed tile 6mm (six millimetre) thick in skirting riser of steps and dado 12mm (twelve millimetre) thick cement mortar 1:3 (1cement:3sand) and jointed with cement slurry.including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

roviding and fixing 10mm (ten millimetre) thick anti skid water proof stain and impect resistent heavy duty fully body vetrified tiles Nitco or equivalant with single piece on stair tread of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimetre) thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 10mm (ten millimetre) thick anti skid water proof stain and impect resistent heavy duty fully body vetrified tiles Nitco or equivalant with single piece on stair riser o of approved shade and colour in riser of steps and landings laid over 12mm (twelve millimetre) thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required completeincluding carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying cement water proofing treatment with Dr. FIXIT FAST FLEX of equivalent 6-7sqm/kg (six desh seven square meter oblique kilogramme) with two component polymer modified comentitious coating consisting of comentitious power and a polimer liquid in two coats for 1st coat :- clean and salutae surface and then applying a coat of Dr. FIXIT and the same process shall be extended upto 300 mm (three hundred millimeter) vertically the second coat shall be applied in opposite direction after four to six hours of application of firstly coat than sprinkle sand on top surface of applied Dr. FIXIT then apply cement mortar 1:4 ( one cement : 4 sand) and admixed with 200 ml (two hundred) of pidiproof LW @ 200 ml ( two hundred) per 50 kg (fifty kilogramme) bag complete as per architect drawing including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 150 mm (one hundred fifty milimeter )dia on wall face PVC for rain water pipes of working pressure not less than 4.5kg/sq .centimeter including filling the joints with approved adhesive complete.including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 150 mm (one hundred fifty millimetre) dia M.S holder bat clamps of approved design to C.I or S.C.I pipes embedded in and including cement concrete blocks 10x10 cm (ten into ten centimetre) of 1:2:4 mix (one cement : 2 sand: 4 graded crushed stone aggregate 20mm (twenty millimetre)nominal size )and cost of cutting holes and making good the wall etc. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge PVC Plain bend 150mm (one hundred fifty millimetre) dia

PVC shoe 150mm dia (one hundred fifty millimetre) dia

Providing and fixing 0.60mm (Zero point six zero milimetre) thick preprinterd steel sheet in roofing with hot dipped metallic zinc coasted sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 ( five) micons primer coating to back coast of polyester of 5 microns over 5 microns primer coating including fixing with screws, prepainted iron J or L hooks, bolts and nuts 6mm(six milimetre) dia with prepainted limpet and rubber washer complete with all accessories as required as per specifications and as per direction of Engineer-in-Charge including carriage of materials with in all leads, liftsother incidentals.

Providing and fixing ridges or hips 60 cm (Sixty centimeter) overall with 0.60 mm (Zero point sixty millimeter) thick preprinted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat or regular modified polyester organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with preprinted iron J or L hooks, bolts & nuts 6mm(Six millimeter) dia and preprinted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing valley 60cm (sixty centimeter) overall 0.60mm (Zero point sixty millimeter) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing, 15cm.( fifteen centimeter) Wide 40cm ( Forty centimeter) Overall semi-circular plain G.I sheet gutters with iron brackets, 40x3(Forty into three) milimetre size bolts and nuts and washer etc. including making necessaary connections with rain-water pipe complete as per designe 0.63mm (zero point sixty three millimetre) thick sheet including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing M.S. BP Sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.

Steel work welded in built up sections,trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . In beams joists channels, angles, tee, flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete as per designe

In trusses and trussed purlins in buildings complete as per designe

In gratings framed guard bars, ladders, railling, brackets and similar works.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm (fifty millimetre) dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X6 mm (fourty into fourty into six millimetre) thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 50X25mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (sixteen into three point fifteen millimetre) lugs 10 cm (ten centimetre) long embedded in cement concrete blocks 15 cmx10cmx10cm (fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6(1cement:3 sand:6 graded stone aggregate 20mm (twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

6mm (six millimetre) thick cement plaster with cement mortar 1:3 (1 cement :3 sand) to ceiling up to all floor including curing and carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

15mm (fifteen milimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to all floor level includingarises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm(eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement:six sand) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

15mm (fifteen milimetre) cement plaster in single coat on the fair side of brick/concrete/stone wall for interior plastering upto floor all level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement:6 sand) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

15mm (fifteen millimetre)Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth Cement Mortar 1:5 (1Cement:5 Sand) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Painting two coat (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt ,dust and other foreign matter with white ready mixed paint . including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying priming coat over new wood & wood based surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and sand papering and knotting. ready mixed paint brushing with white lead for primer including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Painting two costs (excluding priming cost) on new wood and wood based surface enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matters with Enamel paint other than white. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying spirit or oil stains (any colour ) on wood and wood based surfaces to given an even surface including cleaning the surface of all dirt ,dust and sand papering so as to prodce a smooth dry and matt surface including stopping & knotting. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Polishing two coats with french polish on new wood andwood based surfaces to give an surface including cleaning the surface of all dirt, dust ,and sand papered smooth and including a coat of wood filler. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying one coat of AcrylicWashable emulsion Spectrum quartz king or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat i/c necessary putty to give smooth even surface, sand papered smooth complete. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with Readymixed primer as per HP.PWD specification clause 16. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing under layer for plinth protection of 75mm (seventy five millimetre) thick (unconsolidated) bed dry brick/stone aggregated 40mm (fourty millimetre) nominal size with rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing plinth protection 50mm (fifty millimetre) thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm (twenty millimetre)nominal size. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Constructing course rubble dressed "U" shape open surface drain with side wall 15X23cm (fifteen into twenty two) in cement mortor 1:6 (one cement: six sand) and in side plstring with cement plaster 1:3 (one cement : three sand ) including earth work and laying 10cm (Ten Centimetre) cement concrete 1:5:10 (one cement :five sand:ten graded stone aggregate 40mm (Forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4(one cement :two sand ;four graded stone aggregate 20mm (Twenty millimetre) nominal size) and finishing with a floating coat of neat cement and curing complete as per standard design. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing one side green board and other side white board in class rooms enabling writing with chalk and marker and fixed on walls with necessary screwes. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying in trenches galvanised mild steel tubes 25 mm (Twenty Five milimeter) B.S.T/ JINDAL(HISAR)/ TATA STEEL OR EQUIVALENT ( Medium grade )tube fittings (earth work in trenches to be measured and paid separataly). including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and laying in trenches galvanised mild steel tubes 15 mm (fifteen milimeter) TATA STEEL TUBE LTD OR EQUIVALENT ( Medium grade )tube fittings (earth work in trenches to be measured and paid separataly). including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 15mm (Fifteen millimeter) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge

Providing and fixing 20mm (Twenty millimeter) nominal bore to wall ceiling and floor galvanised mild steel tubes TATA STEEL TUBE LTD OR EQUIVALENT (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes Finolex ISI marked including fixing with approved adhesive etc. complete. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge 110 mm (one hundred ten millimetre) dia.

150 mm (one hundred fifty millimetre) dia.

Providing and fixing PVC water storage tank of ISI : 12701 marked , G.I. inlet and outlet connection , 15 mm ( Fifteen millimeter) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground lavel . (i) 1000 (One thousand ) litres net capacity tank . including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge.

Providing and fixing 110X90mm (one hundred ten into ninety millimetre) PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge.

Providing and fixing 110 mm (one hundred ten millimetre) dia PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge.

Providing and fixing 110 mm (one hundred ten millimetre) dia PVC door bend with oval access door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 110mm (one hundred ten millimetre) dia PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing PVC collers ISI marked including fixing with approved adhesive etc. complete. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge . 110 mm (one hundred ten millimetre) dia.

150 mm (one hundredfifty millimetre) dia.

Provioding and fixing dia PVC plain bend ISI marked incliding fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge. 110 mm (one hundred ten millimetre) dia.

150 mm (one hundred fifty millimetre) dia.

Providing and fixing 110 mm (one hundred ten millimetre) dia PVC double equal branch with oval access door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer -in charge .

Providing and fixing 110 mm (one hundred ten millimetre) dia PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 110 mm (one hundred ten millimetre) dia PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge.

Providing and fixing 110 mm (one hundred ten millimetre) dia PVC "Y" junction with oval access door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 110 mm (one hundred ten millimetre) dia PVC plain "Y" junction ISI marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (five hundred eighty millimetre) (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing vitreous China wash down,water closet (European type. W.C. pan) CERA /HINDWARE / SANITARYWARE or equivalent with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):- Anglo indian universal closet. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers : Solid type including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing in position brass mosquito proof coupling for over flow pipe of 25mm (twenty five millimetre) nominal dia (over flow pipe to be measured and paid for separatey). including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing Flat back type of size 430mm x 260mm x 350mm (four hundred thirty millimetre into two hundred sixty millimetre into three hundred fifty millimetre) vitreous China bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with choppe hemp (weste pipe to bemeasured and paid for separately including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing division plate for Urinal of Hindware or equivalent (NO. 61001 ) including carriage of material up to all leads and lifts and as per direction of Engineer-in - charge. (Starwhite colour) Size 600x300 mm (six hundred into three hundred) vitreous China. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing vitreous chinawash basin Standard Category no. 10001 in white shade of CERA/ HINDWARE /SANITARYWARE or equivalent with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fitting Size 600x300mm(six hundred into three hundred) Vitreous china including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing vitreous China padedstal for wash basin complete recessed at the back for the reception of pipes and fittings . CERA/HINDWARE//SANITARYWARE or equivalent including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 32mm (thirty two millimetre) dia rubber plug for sink / wash basin including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 32mm (thirty two millimetre) dia C.P. Brass waste OF JAL/ JAQUAR or equivalent wash basin or sink including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 32mm (thirty two millimetre) dia M.I. Union for wash basin or sink .including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 15mm (Fifteen millimetre) G.I./M.I Union of following sizes including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 600mm x 450 mm (six hundred millimetre into four hundred fifty millimetre) bevelled edge miror of of superior glass mounted on plastic Sheet and fixed to plastic plugs with C.P. Brass screws and washers. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing PTMC Coloured / white high density polythelene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern CERA /HINDWARE or equivalent with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float,with push button,couplings for connections with inlet, outlet and ovr flow pipe, 40mm (fourty millimetre) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) .including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 100 mm (one hundred millimetre) dia cromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws Glass container including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing charomium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing PTMT toilet paper holder of approved quality and colour with steel screws and rawal plugs etc complete:-.including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube. including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing 15mm (fifteen millimeter) dia C.P Brass bib tap of JAL JAQUAR or equivalent with Capstan head . including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing ans fixing 15mm (fifteen millimeter) dia C.P Brass pillar tap of JAL JAQUAR or equivalent with Capstan head including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing CP. brass angle valve JAL JAQUAR or equivalent of 15mm (fifteen millimetre) without Nuts and pipe including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing brass full way valve with wheel JAL JAQUAR or equivalent of 15 mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Providing and fixing brass ball valve (horizontal plunger type) JAL JAQUAR or equivalent. heigh pressure with polythene plastic floats 15 mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Constructing man hole with RCC top slab 1:2:4 mix in (One cement:Two sand:Four graded stone aggregate 20mm (Twenty millimetre nominal size foundation concrete 1:4:8 (One cement:Four sand:Eight graded crushed stone aggregate 40mm (forty millimetre) nominal size inside plastering 15mm(Fifteen millimetre) thick with cement mortar 1:3(One cement: Three sand) finished with a floating coat of neat cement and making channel in cement concrete 1:2:4 mix (One cement:Two sand:Four graded crushed stone aggregate 20 mm (Twenty millimetre) nominal size finished smooth complete curing and testing Inside size 1200 x 900mm (one thousand two hundred into nine hundred millimetre) and 1000mm (one thousand millimetre) deep including C.I.cover and frame (medium duty) 500mm (five hundred millimetre) internal diameters total weight of cover and frame to be not less than 116kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) Weight of frame 58 kg (fifty eight kilogram) With 200mm (two hundred millimetre) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand) including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in charge .

Hemant Kumar