Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.6 LAccepted-AOC GP KIZHAKKAMBALAM KOLENCHERY | THRISSUR | KERALA | 680667 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹41.0 L+₹3.4 L (9.08%)Rejected-AOC DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L2 | Rejected-AOC Not Being L1 | |
| 3 | L3₹41.8 L+₹4.2 L (11.1%)Rejected-AOC NO 6 NJ BUILDING GANGAMMA TEMPLE ROAD JALAHALLI POST BANGALORE 560 013 | BANGALORE | BANGALORE | KARNATAKA | 560013 | L3 | Rejected-AOC Not Being L1 |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
3 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(I)(CG)KOCHI
GE(I)(CG)KOCHI BUILDING NO.22/2614, OPP. SANTHOM CHURCH MUNDAMVELI POST RAMESWARAM KOCHI-682 507
IMPROVEMENTS TO OTM ACCN AND ALLIED SERVICES AT ICGS BEYPORE.
2023_MES_593583_1
8871/E8
Open Tender
Civil Works
Item Rate
180 days
BEYPORE
As per NIT/Tender document
8 documents required · 8 mandatory
₹500
GE(I)(CG)KOCHI
₹84,000
Yes
11 Jul 2023
6 May 2023
10 Jun 2023
6 May 2023
3 Jun 2023
20 May 2023
6 May 2023 - 13 May 2023
Amount
Taking out and stripping old tarfelt over roofs, prapets walls including cement plastering and removing the rubbish n.exe 1.50 KM etc coplete including removing the debrish outside MD land complete all as specified and as directed.
Material and Labour for plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in concrete padding for roof treatment in average thickness 40mm, top surface of concrete finished even and fair without using extra cement complete all as specified and as directed. Note: Water retaining test (Ponding test) shall be carried out after PCC padding for 48 hrs. In case slightest indication of leakages/ seepages is noticed the same shall be rectified by grouting the affected portion without any extra cost to Govt. Thereafter ponding test shall be repeated till there is no indication of seepages/ lekages.
Material and labour for applying oil based bitumen primer conforming to IS 3384-1986 at 0.20 kg/Sqm on prepared surface and applying of one coat of blown grade hot bitumen 85/25 conforming to IS 702 @ 1.20 kg / sqm and applying roof treatment with APP modified waterproofing membrane weighing not less than 3kg/sqm, reinforced with non woven polyster matt weighing not less than 160 gm/sqm having softening point not less than 140 degree centigrade, longitudinal tensile strength not less than 650N/Sqm cm, tearing strength of 180N(Minimum), applied by torch-on application including minimum 10 cm over lap and 15 cm end lap and applying of one coat of blown grade hot bitumen 85/25 conforming to IS 702 @ 1.20 kg / sqm over the membrane and then applying solar reflective bituminous aluminium paint for thermal insulation @ 0.10 kg/sqm complete all as specified and directed.
Material and Labour for cutting out cracks to V section of 10mm size on existing roofs or terracing, cleaning out, wetting, grouting, with cement and sand slurry 1:3 complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc including removal of debries out side MD land all specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding, removing materials and rubbish off the premises complete all as specified and as directed.
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified.
Material and labour for Precast cement concrete solid block masonry using soild PCC block grade C4, exceeding 10 cm in width and built in cement mortar 1:6 complete all as per specified and as directed.
Material and labour for rendering 15mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed.
Material and Labour for cement plaster 5mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth with out using extra cement complete all as specified and as directed.
Material and Labour for rendering 15 mm thick in CM 1:4 on brick/concrete surface of walls, finished fair and even surface without using extra cement complete all as specified and directed.
Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) all as Specified.
Material and labour for providing 25mm thick plain cement concrete 1:2:4 mix type B0, using 12.5mm graded stone aggregate as in under layer to flooring finished rough to reiceve toping complete all as specified and as directed.
Material and Labour for 75mm thick Plain Cement Concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, floors, pavings and hardstanding etc, finished even smooth without using extra cement etc including necessary forwork and filling the joints with sand and bitumen in 1:1 ratio complete all as specified and as directed.
Material and Labour for vitrified ceramic tiles 8-10 mm thick light shade area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 Sqm, of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and as directed. NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.
All as per item No15 above but in vertical surfaces like skiting/dado etc jointed in neat cement slurry and pointed in colored cement to match colour of tiles over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.
Material and Labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile of size 400 x 400 x 7 to 8mm thick in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. NOTE: No extra cost shall be allowed for removing and re-fixing and necessary cutting of door etc if any required during execution of work.
Material and Labour for glazed ceramic coloured tiles in vertical surface 450x350x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 cmplete all as specified.
Demolition of cement concrete in ground floors and paving ( reinforced) n exceeding 15 cm thicknesses, below or above ground level, complete all as specified and as directed.
Material and Labour for TMT(CRS/HCR) bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Supply and Fix TMT(CRS/HCR) bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Material and labour for RCC M-30 design mix using 20 mm graded stone aggregate as in slabs supported on wall, beams and columns, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Material and Labour for Granite 18 mm thick of any type work (table rubbed and polished including moulding, grinding ect), and laid over in steps, treads jambs, pillars, window- cills, cooking platforms, other plateforms and like in over and including 15 mm thick backing coat in CM 1:4 and pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. NOTE: Material and Labour for rounding to edges of Granite slabs shall be measured and paid separately.
Material and Labour for rounding to edges of Granite slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed
Material and labour for preparation of new plastered/concrete surfaces of walls, providing one or more coats of Birla white wall care putty to achieve smooth surfaces and applying two coats of distemper oil emulsion of approved shade/tint over a coat of compatiable priming paint complete all as specified.
Material and Labour for preparing of new ceiling surfaces of any description and applying two coats of acrylic distemper, white or tinted over a coat of primer complete all as specified and as directed.
Material and Labour for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and as directed. Make: Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger
M & L Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Distemper oil emulsion on wall surfaces.
Material and labour for preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and as directed by Engineer-in-Charge.
Material and labour for one coat of white wash on old ceiling surfaces including necessary preparation all as specified and as directed
Material and labour for preparation of old decorated wooden surfaces of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of syntheic enemal paint all as specified and as directed.
Material and labour for preparation of old decorated surfaces of steel of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of syntheic enemal paint all as specified and as directed.
Material and labour taking down chowkhats or frames, without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 sqm in each and removing as directed.
Material and labour taking down chowkhats or frames, without taking off shutters from the frame not exceeding 1.5 Sqm in each and removing as directed.
Taking down shutter of any drescription Not exc 1 sqm in each panes and refixing the same opening complete all as specified and directed.
Taking down shutter of any drescription exc 1 sqm but not exc 2 sqm in each panes and refixing the same opening complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof/wall coverings complete all as specified and as directed.
Supply and fixing pre-colour coated high tensile strength galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency complete all as specified and as directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through through specialist agency and complete all as specified and as directed.
Supply and Fix powder coated push pull type partly panelled and partly glazed door shutter having top rail of section 44.5mm x 44.5mm x 2.00mm, bottom rail of section 100mmx44.50mmx2.00mm, door vertical style of section 85mm x 44.5mm x2.00mm and lock rail of section 100mm x 44.5mm x 2.5mm with aluminium powder coated frame/chowkat of section 100mm x 44.5mm x 2.5mm including necessary jointing cleats, glazing clips, rubber neoprene packing, snap beading, screws, handles and locking arranement etc. fitted with and including 12mm thick prelaminated particle board, interior grade with decorative lamination on both faces at the bottom half of door panel and 5mm thick sun block(one side reflection) tinted glass on top half portion of door panel complete with handles 2 Nos in each door, hinges complete all as specified and directed.
S&F aluminium ventilator (powder coated with approved colour) partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.20 mm thick, half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and directed including taking down old unservicable one
Material and labour for second class hard wood(indian teak wood) plain solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glued pinned at joints, well seasoned and finished with polishing, fixed to wall and making good to wall carving as approved all as specified and directed.
Material and Labour for 30mm thick factory made flush shutter with solid core construction with block board core and plywood face panels commercial type on both sides including lipping on edges complete all as specified and directed.
Supply and Fix 2nd class HW glazed and skeleton shutters 35mm thk, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
Supply and Fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifications complete all as specified and directed.
Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed including taking down old unserviceable one.
Supply and fix 100mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed.
Supply and Fix 100mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge.
Supply and fixing 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete.
Supply and fixing 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete
Material and labour for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink prime including preparation of new wooden surface all as directed and as specified
Supply and fixing in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete.
Supply and fix waste coupling of PTMT 32 mm size (half or full threaded) suitable for urinals/ WHB/Sink etc (Minimum weight 32 mm - 45 gms) all as specified and as directed.
Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified .
Supply and fix in repair plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover and mild steel aluminised hinging device etc complete all as specified and directed.
Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Make: SANDHU, EVEREST
Supply and fix in repairs Bib tap cast copper alloy CP , with capstan handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed, complete, all as specified.
Supply and fix in repairs Angle valve CP cast copper alloy, with capstan handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed.
Supply and fix in repairs Stop valve cast copper alloy, screwed down high pressure with capstan handle, screwed both ends for 15 mm bore iron pipe or for unions and fixed, complete all as specified and directed.
Supply and fixing in repairs vitreous China wash hand basin, white, flat back size 580X450mm including 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc complete all as specified and directed.
S&F in repair.Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union complete all as specified and as directed.
S&F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , seat cover and fixing of flushing cistern, brackets, flushing pipe etc, complete all as specified.
S&F in repairs Pillars taps, 15mm dia bore cast copper alloy with capstan heads, CP fency type screwed down high pressure with or without lettered'Hot' or cold with long screwed shanks and ly nuts, screwed for iron pipe and fixed complete all as specified and directed
Material and Labour for repairing of chajja/roof projectio by taking down old plaster/concrete of any description and making good with cement concrete (nominal mix)1:2:4 Type B0 and finishing the surface with CM 1:3 10mm thick and applying two coats of exterior emulsion (weather coat) paint over a coat of primer complete all as specified and directed.
Taking down carefully (copper/aluminum) point wiring complete of any type (batten/surface conduit) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants regulators etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster or tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.
Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FRLS) upto and including working voltage 1100volts grade, drawn through and including PVC casing and caping including all accessories ISI marked including press fit white PVC open switch/surface board high strength and crack resistance and unsheathed copper conductor stranded cable(FRLS) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly for the following:-. (a ) one light point controlled by one switch 5 Amps
(b ) one fan point point controlled by one switch 5 Amps
(c) One 3 pin socket outlet 5 Amps on Independent board
(d ) One 3 pin socket outlet 5 Amps on same board
( e) One bell point controlled by one bell push
Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed.
Supply only Bell push 5 Amps one way complete all as specified and directed.
Supply only Modular socket outlet, 6 Amps, 2 and 3 pin combined complete all as specified and directed.
Supply only Modular socket outlet, 6 Amps/ 16 Amps, 2 and 3 pin combined complete all as specified and directed.
Supply and Fix Modular Switch 1 way, 16 Amps, 1 module complete all as specified and as directed.
Supply and fix Fan step regulator, 120 w, 2 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 12 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 8 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 6 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 4 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 3 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 12 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 8 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 6 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 4 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 3 module complete all as specified and as directed.
Supply and fix ceiling rose, 65x50mm 3 terminal,poly carbonate,isolated body white/any shade complete all as specified and as directed.
Supply and Fix Bell, AC, 230 volts, 230 volts, single pole complete all as specified and as directed.
Supply and Fix Switch socket combination multipurpose 5 pin, 5&15 amp, 240 Volts complete all as specified and as directed.
All as per Item No. 68 above but with 2.5 sq mm PVC insulated copper conductor cable(FRLS) including 2.5sq mm PVC copper conductor used as earth wire for power point on independent board for One 3 pin socket outlet, 15 Amps.
Supply and fix Pendant ordinary, comprising ceiling rose, brass with insulated body lamp holder, cord grip pattern, and 0.5 sq.mmcopper flexible twisted twin cord up to1.5m complete all as specified and as directed.
Supply and fixing LED bulb 9 watts, 230 volt complete all as specified and directed. Make: CELS Cat part No CLLC-LP-10 or equivalent in Havells/Philips/Crompton Greaves.
Supply and fixing MCB double pole 240 volt B curve 10 KA 25 Amps capacity complete all as specified and as directed.
Supply and fix MCB TPN, 32 A, 415 volt C curve 10 KA complete all as specified and directed.
Supply and fix MCB single pole, 6 to 32 Amp 240 volt B curve 10 KA complete all as specified and directed.
Supply and fix VTPN MCCB 125 A, 8 way distribution board, with 200 Amps bus bar,double door flush type, with IP-54 protection, isolated neutral bars, door earthing, suitable for 4P MCCB of rating 125 A as incomer (frame F1) complete with all accessories all as specified and directed by Engineer-in Charge. Make: Indo Asian Cat No 812042 or equivalent in L&T/Crompton Greaves/Havells
Supply and fix MCCB, 4 pole, adjustable thermal setting type, confirm to IEC 60947-II, F1 frame of rating 125 A, breaking capacity 25 kA complete with all accessories all as specified and directed by Engineer-in Charge. Make: Indo Asian Cat No 830273 or equivalent in L&T/Crompton Greaves/Havells
Supply and fix LED tube light fittings recessed mounting type, low depth aesthetically desgned LED 2 X 2 flat panels to enhance the delight of occupants complete all as specified and as directed. Make: Cat No. BCTBLR 36 W LED FP CW (Cool white) of Bajaj or L&T/Crompton Greaves/Havells
Supply and fix LED tube light fittings with lamp 1X20 Watts,extruded aluminium housing and diffuser, free illumination for continuous operation complete all as specified and as directed. Make: Cat No. BCLAB 20W WH LED P (cool white) of Bajaj or L&T/Crompton Greaves/Havells
Supply and fix Surface mounted round LED down lighter with Al die-cast body, , finished with drop down PC diffuser to deliver low glare illumination with optimised heat sink for efficient heat dessipation all as specified and as directed. Make: Cat No. BGSLO SLEEK SURFACE 15W WH RD ( white) of Bajaj or L&T/Crompton Greaves/Havells
Supply and fix Bulk head luminaire with opal diffuser with energy saving new generation 10 Watt LED lamp, IP 65 protection all as specified and as directed. Make: Cat No. BIBWP 10W LED (white) of Bajaj or L&T/Crompton Greaves/Havells
Material and labour for Sub main wiring using two runs of single core PVC insulated cable(FR) 4 sqmm copper conductor multi stranded and one run of 4 sqmm copper conductor insulated cable (FR)using as earth wire drawn through and including suitable size non metallic rigid PVC conduit not less than 25mm dia with accessories including taking down old aluminium/Copper Sub main wirng complete all as specified and directed. Note- 3 run of 4 sq mm PVC copper wire and One run of PVC conduit shall be measured and paid as one unit.
Material and labour for Sub main wiring using two runs of single core PVC insulated cable (FR) 6 sqmm copper conductor multi stranded and one run of 6 sqmm copper conductor insulated cable (FR)using as earth wire drawn through and including suitable size non metallic rigid PVC conduit not less than 25mm dia with accessories including taking down old aluminium/Copper Sub main wirng complete all as specified and directed. Note- 3 run of 6 sq mm PVC copper wire and One run of PVC conduit shall be measured and paid as one unit.
Material and labour for Sub main wiring using four runs of single core PVC insulated cable(FR) 6 sqmm copper conductor multi stranded and two runs of 6 sqmm copper conductor insulated cable (FR)using as earth wire drawn through and including non metallic PVC conduit pipe ISI marked of size 32 sq mm including taking down old aluminium/Copper Sub main wirng complete all as specified and directed. Note- 6 run of 6 sq mm PVC copper wire and One run of PVC conduit shall be measured and paid as one unit.
Supply and fix in repairs Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, TPN 4 way, single door, IP-30 protection (4 + 12 module) TPN MCB, 415 V as incomer, SP/DP/TP/TPN as outgoing complete all as specified and directed .
Supply and fix in repairs Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 4 way, single door, IP-30 protection DP MCB, 240 V as incomer, SP MCBs as outgoing complete all as specified and directed.
Supply and fix in repairs Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 8 way with 200 Amps rated copper bus bar double door protection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and directed .
Supply and fix in repairs single pole and neutral enclouser with a two pin and earth plug and socket complete with and including one MCB single pole 20 Amps complete all as specified and directed.
Taking down fan of any type and size after disconnecting, depositing to store yard and Hanging/fixing only after repair/reconditioning fan of any type and size all as directed.
Supply and fix energy efficient 5 star rated high speed BLDC ceiling fan with remote, 370RPM, 1200mm sweep, including motor-blade set, downrod, shackle, assembly kit, canopy , remote etc, Operating voltage 230 volt single phase complete all as specified and as directed. Make: Havells/Crompton Greaves/Usha.
Supply and fix in repair Exhaust Fan of size 300 mm sweep with louvers, with plastic body AC 230 V, 50 Hz, and connecting to ceiling rose terminals with 23/.0076 flexible cable and making good the disturbed surface to match with existing finishes complete all specified and directed.
Supply and fix in repairs single pole and neutral enclouser with a two pin and earth plug and socket complete with and including one MCB single pole 20 Amps complete all as specified and directed.
Supply, laying or passing through pipe LT, XLPE insulated, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor 1100 Volts grade of size 50 Sqmm 3.5 core including connecting/testing after taking out from trenches/ pole unserviceable LT UG cable complete all as specified and directed.
Supply, laying or passing through pipe LT, XLPE insulated, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor 1100 Volts grade of size 35 Sqmm 3.5 core including connecting/testing after taking out from trenches/ pole unserviceable LT UG cable complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting exceeding 20cm girth all as specified and directed.
Supply and fix Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 15mm bore complete all as specified and as directed.
Supply and fix Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 20mm bore complete all as specified and as directed.
Schedule of Credit (Minus) Rs.28823.00 NOTE: Bidder shall insert credit amount of Rs. 58823.00 as rate in Green field under Col-13.
KDR CONSTRUCTION
ANAND REFRIGERATION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .