Construction of New Passenger Terminal Building for Domestic Operation at Jodhpur Airport SH Furnishing of Arrival Departure SHA and offices area of New Passenger Terminal Building along with seating solutions at Jodhpur Airport

Amount

Supplying, fixing and placing a three seater chair as per specification mentioned below. 1. DIMENSION OF CHAIR OF DIFFERENT SEATING CAPACITY (a) Overall Length (in mm), Tolerance ± 10 mm 1650 (b) Overall Height (in mm), Tolerance ± 10 mm 850 (c) Floor to seat Height (in mm), (Front), Tolerance ± 10 mm 425 (d) Depth of the Seat (in mm), Tolerance ± 10 mm 450 (e) Width of the seat (in mm), Tolerance ± 10 mm 485 (f) Thickness of seat support area and lumber support area (in mm), Tolerance ± 2 mm 25 2. MAIN FRAME The Chair shall be on main frame of extruded aluminium of minimum thickness 4 mm and appropriate cross section so as to achieve the required strength and durability as per lates BIFMA (Bisiness Institutional Furniture Manufacturers Association) X 5.4 - 2020 standard with powder coating of minimum 70 microns. The ends shall be aesthetically and plugged with end caps. 3. SEAT & BACKREST a. The seat & backrest shall be of integral type made from high density self-skinned integral PU foam coloured in the mass reinforeced with concealed steel frame of maximum 60 mm width with following options, and thickness so as to achieve the durability as per latest BIFMA X 5.4 standard: (i) PU without inserts integrated in concealed steel frame or (ii) PU with inserts of wire mesh integrated in concealed steel frame or (iii) PU with steel strips integrated in concealed steel frame or (iv) PU with steel springs integrated in concealed steel frame The profile of the integral system should ensure comfortable sitting having ergonomic profile and thigh support. The seat should have slant towards backwards for comfort. The thickness, hardness and density ofthe PU moulded foam seat should guarantee satisfactory level of comfort for the user. The density should be minimum 300 Kg/m³. The shore'A'hardness should be between 45 to 85. b. Seat and Backrest may either be one single unit or separate seat and back in two separate units. The seat and backrest should comply with the fireretardant norms BS 5852 Crib 5 (which descrlbes best practice methods to assess the ignitability of single material combinations) test method or EN 1021:1, EN 1021:2 (Assessment ofthe ignitability of upholstered furniture) or equivalent Indian Standard. c. Seat and backrest shall be fixed on the main frame conveniently ensuring that screws, nuts and bolts are not directly intruded in the PU of Seat and Back but fitted in metal parts. 4. BASE / LEGS The frame support (Base / legs) shall be of high pressure alumini The base / legs shall be finished with powder coating of minimum The design of the base / legs shall ensure that the chair remains should have suitable anti-skid level adjusting shoes of soft grip at um die cast. 70 microns. stable and it the bottom. The design of the base / Iegs and its fixing shall be such that it achieves the durability as per latest BIFMA x 5.4 standard. 5. ARMREST Armrests for each seat made of high-pressure aluminium die cast shall be provided. The armrests should be finished with powder coating of minimum 70 microns. The armrest and its fixing shall be stable enough to achieve the durability as per latest BIFMA X 5.4 standard. 6. ASSEMBLY The base / legs and seating shall be fixed on the main frame with conveniently fixed armrests in such a way that assembling/dismantling is easy and interchangeability of seats and armrests is possible. The assembly shall also be capable of providing side table. The chair shall not develop any structural failure within the Defect Liability Period of 24 months and the manufacturing company shall submit a confirmation certificate to meet this requirement. The assembly shall also ensure that all nuts, bolts and screws are concealed without protruding and maintains overall aesthetics. There should not be any sharp edges. 7. STABILITY The chair shall not get displaced due to frequent occupying and vacating of chair by passengers. 8. CHARGING FACILITY Charging facility for laptops & mobile phones shall be provided between each two seats on arms in the unit of three seater chair by providing minimum one No. 5 Amp. 5 pin AC socket, one combi Twin USB 2400 mA multi stand socket each Type of 'A' & Type 'C' along with suitable shock proof enclosure at each two intermediate arms per set of chairs. Wiring should be done with minimum 03 mtr. & up to nearest power supply point as per site 3 Core x 1.5 Sq,mm PVC insulated Flame-Retardant Low Smoke (FRLS) Iead in PVC conduit and 5 Amp 3 pin top for taking electrical supply. (All accessories should be ISI Marked). 9. STANDARD The offered model shall be conforming to latest international furniture standards BIFMA X 5.4 having necessary test certificates issued by testing agency accredited by BIFIT4A / EN / IS. 10. COLOUR The colour of the chair's PU seat & back as well as of frame, arms and legs shall be as per AAI requirement suiting the Interior / Architectural Design of the Terminal Bldg. to enhance the Aesthetics / Local Flavour. 11. IDENTIFICATION MARK AAI logo and Sl. No. should be mentioned at appropriate place. All complete as per direction & satisfaction of Engineer-In-charge.

Supplying, fixing and placing a three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40 Kg/m³ in seat and 32 Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 40 Kg/m³. The complete structure shall be fully upholstered with leatherite tapestry 1±0.2 mm thick and 571 GSM. The understructure shall be supported by pipe frame leg of SS shiny chrome finish having length 875 mm and height 100 mm with cross-section area 67 mm X 13 mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 600±10 mm(D) X 1810±10 mm(W), seat height = 440±10 mm, overall width = 2120±10 mm, overall depth = 935±10 mm & overall height = 850±10 mm. Size In mm - 1825(L) X 780(D) X 755(H) CHARGING FACILITY Charging facility for laptops & mobile phones shall be provided at armrest/suitable location in the each sofa by providing minimum one No. 5 Amp. 5 pin AC socket, one combi Twin USB 2400 mA multi stand socket each Type of 'A' & Type 'C' along with suitable shock proof enclosure per set of sofa. Wiring should be done with 03 mtr. & up to nearest power supply point as per site 3 Core x 1.5 Sq,mm PVC insulated Flame-Retardant Low Smoke (FRLS) Iead in PVC conduit and 5 Amp 3 pin top for taking electrical supply. (All accessories should be ISI Marked). The colour of the this unit shall be as per AAI requirement suiting the Interior / Architectural Design of the Terminal Bulding to enhance the Aesthetics / Local Flavour & all complete as per direction & satisfaction of engineer In-charge.

Supplying, fixing and placing of lounge chair cum recliner finished with beech wood or similar with polyurethane high density foaming, having 32 (±2) kg/m3 density of foam & leatherette as per approved shade of engineer incharge. the loading capacity shall be upto 150 kgs with necessary ss 316 grade frame base etc. as required with strength. size 600(w) x 1350 (l) x 300 (seat height). The colour of the this unit shall be as per AAI requirement suiting the interior / architectural design of the terminal bulding to enhance the aesthetics / local flavour & all complete as per direction & satisfaction of engineer In-charge.

Supplying, fixing and placing a center table as per specification mentioned below. material & subtype engineered wood - mdf,solid wood - steam beech wood,veneer - oak veneer table top material veneer, leg material solid wood, finish matte, colour & colour family brown - dark oak or as approved by EIC, dimension (w)1200mm x (d)700mm x (h)400mm, table top thickness 36 mm, size grand, style modern assembly type knock down, storage type shelves. tolerance of ± 5mm in all the dimensions are acceptable. colour & all complete as per direction & satisfaction of engineer In-charge.

Supplying, Fixing, and Placing of Main Table with Side Return Unit and Back Storage Primary work surface overall size is 2400 mm (L) x 2330 mm (D) x 770 mm (H). 45 mm thick table top made of prelaminated particle board work surface with rich cherry finish. Same matching edge banding made of same red cherry P.U. polish. Modesty is designed with leather patch. Side panel is made of 36 mm thick. * Provision of side unit of size is 1200 mm (L) x 595 mm (D) x 770 mm (H), construction on table top. Wire management includes 2 holes with SS grommet and 1 hole with PVC grommet on top side unit. Below table top one keyboard tray. Inside unit below the top: 1 keyboard tray, 1 open box file, 1 drawer + 1 openable door shelf. * Fixed pedestal of size 450 mm (L) x 400 mm (D) x 690 mm (H), having 3 equal drawers provided with central lock for security. Handles are provided for ease of opening. Overall construction of pedestal is 18 mm along with fascia of drawers. Modular back unit top shall be made from 25 mm thick prelaminated particle board/veneer - MDF/steam beech veneer of grade II type III of IS 12823/latest & conforming to DIN 68861. ISO 9001-2015. * While rest of the sides as well as shelves and shutter to be made up of 18 mm thick prelaminated particle board/veneer - MDF/steam beech veneer with P.U. polish. All edges to be provided with same matching veneer edge banding fixed with hot melt glue. * Storage unit with 3 open carcasses, 4 shutters + 3 drawers. Construction is: below the top 3 open carcass shelves of same size. Per carcass size is 555 mm (L) x 380 mm (H). 2 openable doors with 1 fixed shelf + 3 drawers + 2 openable doors with 1 fixed shelf. Provided with 2 universal cam locks + 1 central lock for drawers for security. Handles are provided for ease of opening. Overall height of product is @ 1040 mm. * Each shutter should be fixed with required number of hinges, SS tower bolt of 100 x 10 mm, double strip magnetic catcher. Drawers shall have 100 mm size SS fancy handles (one on each drawer) with necessary hardware/fittings/hinges etc. of approved quality (make: Ebco). For installation of side unit, wooden dowels and minifix to be used for additional support. * All the MDF boards are as per IS-14587-1998, conforming to DIN 68861. ISO 9001-2015 quality certification confirming to ASTM D 4499 standards for viscosity and thermal stability. Colour & all complete as per direction & satisfaction of Engineer In-charge.

Supplying and placing table structure of curves-shape desk .primary work surface over all size is 1800mm(l)x 900mm(d)x 760mm(h) 50mm thick table top made of prelaminated particle board work surface with glossy walnut finish same matching edge banding made of same matte finish.side pannel is made of 45mm thick.provision of side runner of size is 1400mm(l)x 400mm(d)x 660mm(h), (construction is 1 openable door + 1 open shelve for cpu back side have 3 holes ,in between both 1 key board tray with telescopic channel& 1 open box storage (l) 550mm x (h) 350mm from down 1-drawer . 2 drawers mobile pedestal of size 400mm(l)x 480mm(d)x 550mm(h) , having 2 drawers with castors in provided with cetnral lock for security and given curved shaped upper drawer are provided for easy of opening.overall construction of pedestal is 18 mm along with fecia of drawers. three layer prelaminated particles board(wood product) of grade ii type iii of is 12823/latest. modular back unit top shall be made from 25 mm thick prelaminated particle board/veneer - mdf/steam beech veneer of grade ii type iii of is 12823/latest & confirm to din 68861.iso 9001- 2015. while rest of the sides as well as shelves and shutter to be made up of 18 mm thick prelaminated particle board/veneer - mdf/steam beech veneer p.u. polish. all edges to be provided with same matching veneer edge banding fixed with the hot melt glue. storage unit with 4 shutters construction is 2 openable doors with 1 fixed shelve + 2 openable doors with 1 fixed shelve , in provided with 2 universal cam lock for security and handles are provided for easy of opening. over all height of product is @ 770 mm . each shutter should be fixed with required numbers hinges, ss tower bolt of 100 x 10, double strip magnetic catcher and drawers shall have 100 mm size ss fancy handles (one on each drawer) with necessary hardware/ fitting/ hinges etc. of approved quality(make: ebco).for installation of side unit wooden dowels and minifix to use for additional support. all the mdf borad are is-14587-1998 with confirm to din 68861.iso 9001- 2015 quality certification confirming to astm d 4499 standards for viscosity and thermal stability . main table size : 1800 mm (l) x 900 mm (d) x 760 mm(h) , side return unit 1400mm(l)x 400mm(d)x 660mm(h) and back storage 1600 mm (l)x 400 mm (d)x 770 mm (h) Colour & all complete as per direction & satisfaction of Engineer In-charge.

* Supplying ,fixing & placing of main table with top made of 45 mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. side panel made of 36 mm thick and modesty made of 25 mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius *Side storage with top made of 45mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. side panel , shelves and openable shuttes made of 25 mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. back panel made of 9 mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. hardware included (i.e. hinges , handle & lock). pedestal size 400l x 450w x 600ht of 2 drawer + 1 filing unit .pedestal top, side panel and drwer front facia made of 18 mm thick fsc certified factory pressed commercial ply with 0.8-1 mm thick laminate both side of approved make and brand. the profile of the top. side panel and front facia shall be rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. main table size - 1800mm x 900mm x 750 mm, side return unit size -1200 mm x 400 mm x 750 and Back Storage Size : 1800mm x 450 mm x 750 mm Colour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, , fixing and placing three seater exclusive premium leatherette modernist classic design lounge seating sofa size is 1905mm(l) x890mm(d)x 870mm(h) with kiln-dried wood framing makes it warp and scratch resistant,comfortable seat depth & height designed keeping modern indian lifestyle in mind,wrapped in buttery-soft premium leatherette, the panelled back and cushioned armrests encourage lounging,designed with modernity & elegance, choose the option that suits airport office. * Combination construction structure are made in moisture content shall be less than 10 %. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial and moisture proof plywood .understructure frame shall be constructed from 18 mm thick kiln-dried german beech wood framing is highly durable. the complete structure shall be covered by p.u.foam fixed with adhesive glue ,the frame shall be padded with high resilience polyurethane foam having 28 (±2) kg per cu meter density in seat it shall be stack foam of 50mm thik,40mm thick back foam having 20 (±2) kg per cu meter density foam used ,there shall be cushion arm 40mm thick provided padded with high resilience polyurethane foam having density 20 (±2) kg per cu meter . the complete stack foam structure shall be covered with premium leatherette in black-eerie black-coffee brown,brown-burnt umber colour, it complements the modish legs are made by round shape in pvc material. ( seat : 510 mm(d) x 445mm(h) , arms height @ 620mm / back height @ 460mm ). Colour & all complete as per direction & satisfaction of Engineer-Incharge.

Supplying, fixing and placing modular table with pedestal and partition size 1500mm (L) x 900 mm (D) x 750 mm (H) top height & 1200 mm partition height with pedestal. workstation shall be non sharing with 67mm thick sliding tile base partition of 1200mm height with required table top size 1500mm (L) x 900 mm (D). The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with polyester powder coating 50-60 micron thick. the trims shall have the size 67mm x 19mm with 1.5mm thick covered with die cast end caps on joints 2 ways, 3 ways & 4 ways (l-cover for corner, t-cover for middle section wherever required). the aluminium raceway shall be situated below the worktop with 1.4 mm cover thickness and 2mm back thickness as per requirement of inlaying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. There shall be soft-board (with fabric) and marker board provided at front of the user. Laminated top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. the partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (lan) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. Slots/cut-outs should be given on raceways to fix all electrical and data points. single sided PVC wire manager should be enclosed at table top. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. Particle board of grade II of is level. table top made of 36mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. Side panel and modesty made of 25 mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius * pedestal size 400 l x 450 w x 600 ht. of 2 drawer + 1 filing unit .pedestal top, side panel and drawer front facia made of 18 mm thick fsc certified factory pressed commercial ply with 0.8-1 mm thick laminate both side of approved make and brand. the profile of the top. side panel and front facia shall be rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. tolerance of ± 5mm in all the dimensions are acceptable. . All design and dimension are as per specifications & drawings. the set consist of workstation table top size 1500mm (L) x 900 mm (D) x 750 mm (H) top height & 1200 mm partition height with pedestal. * The above sizes & nos. may be customized accordingly office size. Colour & all complete as per direction & satisfaction of engineer-in charge.

* Supplying, fixing and placing of main table with top made of 45 mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand.the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc. that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. side panel made of 36 mm thick and modesty made of 25 mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. *side storage with top made of 45 mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. side panel, shelves and openable shuttes made of 25 mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. back panel made of 9 mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. hardware included (i.e. hinges , handle & lock). pedestal size 400l x 450w x 600ht of 2 drawer + 1 filing unit .pedestal top, side panel and drwer front facia made of 18 mm thick fsc certified factory pressed commercial ply with 0.8-1 mm thick laminate both side of approved make and brand. the profile of the top. side panel and front facia shall be rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. * Side panel and modesty made of 18 mm thick fsc certified factory pressed commercial, ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. the profile of the top shall be in, rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to. main table size - 1800mm x 900mm x 750 mm & side unit size -1200 mm x 400 mm x 750. Colour & all complete as per direction & satisfaction of engineer-incharge.

* Supplying, fixing & placing of main table with top made of 36 mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. side panel 36 mm and modesty 25 mm thick fsc certified factory pressed commercial ply with 0.8 - 1 mm thick laminate both side of approved shade and brand. the profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius pedestal size 400l x 450w x 600ht of 2 drawer + 1 filing unit .pedestal top, side panel and drwer front facia made of 18 mm thick fsc certified factory pressed commercial ply with 0.8-1 mm thick laminate both side of approved make and brand. the profile of the top. side panel and front facia shall be rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. * Pedestal size 400l x 450w x 600ht of 2 drawer + 1 filing unit .pedestal top, side panel and drwer front facia made of 18 mm thick fsc certified factory pressed commercial ply with 0.8-1 mm thick laminate both side. main table size - 1500mm x 750mm x 750 mm colour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing in position of meeting table as per image of size 3750mm x 1500mm x 750mm. tabeltop: - 45mm thick. combination of mdf and ply board with veneer and pu polish finish board with veneer edge banding with center part shall be cover with black leather . top supported 25 mm thick side panel and 18 mm thick modesty panel made of mdf board with veneer and pu polish finish board with veneer edge banding. provision of 8 module flip up box (without switch and socket) for wire management. * All the MDF boards are as per IS-14587-1998, conforming to DIN 68861. ISO 9001-2015 quality certification confirming to ASTM D 4499 standards for viscosity and thermal stability. Colour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing a Executive chair as per specification mentioned below. * High back 360° degre revolving chair * All over size is : 673mm(l)x 508mm(d)x 1270mm(h) , * The chair made of full natural leather. it will comes in matte finsih extra padded designed for more confirmt at workplace in contemporary style details : * Arms : wooden arms with lether padding arm rest are fitted to the seat & back. * Use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat and back) . * Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±2) kg per cu meter for best quality cushioning in seat . * Back : 40 ± 2 mm thick polyurethane foam with density 32 (±2) kg per cu meter for best quality cushioning in back .backrest support foam design based on symmetrical lumbar support * Mechanism : multi-locking knee tilt mechanism. seat maximum height is 580 mm & minimum height is 500mm & back height from floor maximum height is 1270mm & minimum height is 1219mm * Gas lift 100-120mm telescopic haudraulic and shall be class 3 * Base : the prong (base) is made of soild wood with polished and fitted with 5 numbers. twin wheel castors (castor wheel dia. 50mm) & 700mm pitch center dia (740mm with castors) .tolerance of ± 5mm in all the dimensions are acceptable. all design and dimension are as per specifications. use of wood and wood derivatives. Colour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing and placing a Visitor chair as per specification mentioned below. * Medium back 360° degre revolving chair * All over size is : 660mm(l)x 500mm(d)x 1100mm(h) , *The chair made of full natural leather upholstered with soft touch leather upholstery. it will comes in matte finsih in contemporary style details : * Arms : wooden arms with lether padding extra padded wooden handles for comfort. * Use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat and back) . * Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±2) kg per cu meter for best quality cushioning in seat . * Back : 40 ± 2 mm thick polyurethane foam with density 32 (±2) kg per cu meter for best quality cushioning in back . backrest support foam design based on symmetrical lumbar support * Mechanism : multi-locking center tilt mechanism . * The back size is 660mm(l)x 625mm(h) , back height from floor maximum height is 1100 mm & minimum height is 1000mm * Gas lift 100-120 mm telescopic haudraulic and shall be class 3. * Base : the prong (base) is made of soild wood with polished and fitted with 5 numbers. twin wheel castors (castor wheel dia. 50mm) & 700mm pitch center dia (740mm with castors) tolerance of ± 5mm in all the dimensions are acceptable. colour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, , fixing and placing three seater exclusive premium leatherette sofa size is 2040mm(l) x960mm(d)x 970mm(h) with kiln-dried wood framing makes it warp and scratch resistant,comfortable seat depth & height designed keeping modern indian lifestyle in mind,wrapped in buttery-soft premium leatherette, the panelled back and cushioned armrests encourage lounging,designed with modernity & elegance, choose the option that suits airport office. * Combination construction structure are made in moisture content shall be less than 10%. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial and moisture proof plywood .understructure frame shall be constructed from 18 mm thick kiln-dried german beech wood framing is highly durable. the complete structure shall be covered by p.u.foam fixed with adhesive glue ,the frame shall be padded with high resilience polyurethane foam having 40 (±2) kg per cu meter density in seat it shall be stack foam of 50mm thik,50mm thick back foam having 40 (±2) kg per cu meter density foam used ,there shall be cushion arm 50mm thick provided padded with high resilience polyurethane foam having density 40 (±2) kg per cu meter . the complete stack foam structure shall be covered with premium leatherette, it complements the modish legs are made by round shape in pvc material. ( seat : 540mm(d) x 470mm(h) , back height @ 550mm ) Colour & all complete as per direction & satisfaction of Engineer-Incharge.

Supplying, , fixing and placing single seater exclusive premium leatherette sofa size is 1000mm(l) x960mm(d)x 970mm(h) with kiln-dried wood framing makes it warp and scratch resistant,comfortable seat depth & height designed keeping modern indian lifestyle in mind,wrapped in buttery-soft premium leatherette, the panelled back and cushioned armrests encourage lounging,designed with modernity & elegance, choose the option that suits airport office. *Combination construction structure are made in moisture content shall be less than 10%. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial and moisture proof plywood.understructure frame shall be constructed from 18 mm thick kiln-dried german beech wood framing is highly durable. the complete structure shall be covered by p.u.foam fixed with adhesive glue ,the frame shall be padded with high resilience polyurethane foam having 40 (±2) kg per cu meter density in seat it shall be stack foam of 50mm thik,50mm thick back foam having 40 (±2) kg per cu meter density foam used ,there shall be cushion arm 50mm thick provided padded with high resilience polyurethane foam having density 40 (±2) kg per cu meter . the complete stack foam structure shall be covered with premium leatherette, it complements the modish legs are made by round shape in pvc material. ( seat : 540mm(d) x 470mm(h) , back height @ 550mm ) Colour & all complete as per direction & satisfaction of Engineer-Incharge.

Supplying, fixing and placing a Center Table as per specification mentioned below. material & subtype engineered wood - mdf,solid wood - steam beech wood,veneer - oak veneer table top material veneer, leg material solid wood, finish matte (semi gloss), colour & colour family brown - dark oak or as approved, dimension (w)1200mm x (d)700mm x (h)400mm, table top thickness 36 mm, size grand, style modern assembly type knock down, storage type shelves. Colour & all complete as per direction & satisfaction of Engineer-Incharge.

Supplying, fixing and placing a corner table as per specification mentioned below. material & subtype engineered wood - mdf,solid wood - steam beech wood,veneer - oak veneer table top material veneer, frame material engineered wood, leg material solid wood, finish matte colour & colour family brown - dark oak or as approved, Dimension (w) 600mm x (d) 600mm x (h) 470mm, table top thickness 34mm, size grand, style modern, assembly type knock down. Tolerance of ± 5mm in all the dimensions are acceptable. Colour & all complete as per direction & satisfaction of Engineer-Incharge.

Supplying, , fixing and placing single seater exclusive premium leatherette modernist classic design lounge seating sofa size is 960mm(l) x890mm(d)x 870mm(h) with kiln-dried wood framing makes it warp and scratch resistant,comfortable seat depth & height designed keeping modern indian lifestyle in mind,wrapped in buttery-soft premium leatherette, the panelled back and cushioned armrests encourage lounging,designed with modernity & elegance, choose the option that suits airport office. * Combination construction structure are made in moisture content shall be less than 10%. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial and moisture proof plywood .understructure frame shall be constructed from 18 mm thick kiln-dried german beech wood framing is highly durable. the complete structure shall be covered by p.u.foam fixed with adhesive glue ,the frame shall be padded with high resilience polyurethane foam having 28 (±2) kg per cu meter density in seat it shall be stack foam of 50mm thik,40mm thick back foam having 20 density foam used ,there shall be cushion arm 40mm thick provided padded with high resilience polyurethane foam having density 20 (±2) kg per cu meter . the complete stack foam structure shall be covered with premium leatherette in black-eerie black-coffee brown,brown-burnt umber colour, it complements the modish legs are made by round shape in pvc material.( seat : 510 mm(d) x 445mm(h) , arms height @ 620mm / back height @ 460mm ). colour and all complete as per direction & satisfaction of engineer-incharge.

Supplying , fixing and placing of high back chair with follwing specifications. *High Back 360° Degree Revolving Chair *All over size is: 625 mm (L) x 760 mm (D) x 1320 mm (H) *The chair is made of full upholstery in black leatherette colour. *It comes in matte finish in contemporary style. Details: *Arms: Armrest is having two adjustment heights (up & down). *Use of ply: 12 mm thick hot pressed BWR plywood (IS grade - 303 for seat and back). *Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±2) kg per cu meter for best quality cushioning in seat. *Back: 40 ± 2 mm thick polyurethane foam with density 32 (±2) kg per cu meter for best quality cushioning in back. Backrest support foam design based on symmetrical lumbar support. *Mechanism: Single locking mechanism. *Only seat size is 525 mm (L) x 515 mm (D) x 455–555 mm (H) & the back size is 460 mm (L) x 780 mm (H). *Seat maximum height is 555 mm & minimum height is 455 mm. *Back height from floor maximum is 1315 mm & minimum is 1215 mm. *Gas lift: 120 mm telescopic hydraulic. *Base: Chrome base with smooth castors. Colour & all complete as per direction & satisfaction of Engineer-Incharge.

Supplying , fixing and placing of high back chair with following specifications. * High back 360° degree revolving chair * Overall size: (w) 740 mm x (d) 740 mm x (h) 1260 mm Description: * The chair is made of leatherette in black colour. it comes in matte finish with a contemporary style. Details: * Arms: wood arm rest connected with seat and back. * Use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303) for seat and back. * Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±2) kg per cu meter for best quality cushioning in seat. * Back: 40 ± 2 mm thick polyurethane foam with density 32 (±2) kg per cu meter for best quality cushioning in back. backrest support foam design based on symmetrical lumbar support. * Mechanism: recline with 4 position locking. * Function: adjustable armrest, adjustable headrest, revolving, dual sitting mode, pneumatic height lift, adjustable seat depth. * Base: 650 mm shiny chrome base with nylon castors; shall be 65.0 ± 0.5 cm pitch-centre-dia (75.0 ± 1.0 cm with castors). * Gas lift: 120 mm telescopic hydraulic. Colour & all complete as per direction & satisfaction of Engineer In-charge.

Supplying, , fixing and placing in position of single bed (with mattress) as per image.construction of bed shall be knock down type in nature. bed shall be made of combination of solid steam beech wood and ply on mattress panel. bed headboard , frame and leg material shall be solid steam beech wood . size of bed shall be (w)1070mm x (d)2080mm x (h)950mm.head board height shall be 670 mm and seaating height shall be 350mm from floor. each bed shall have 150 mm memory foam mattress of suitable size of bed . Colour and all complete as per direction & satisfaction of Engineer-Incharge.

Supplying, , fixing and placing two seater exclusive premium leatherette modernist classic design seating sofa size is 1530mm(l) x710mm(d)x 770mm(h) with kiln-dried wood framing makes it warp and scratch resistant,comfortable seat depth & height designed keeping modern indian lifestyle in mind,wrapped in buttery-soft premium leatherette , the panelled back and cushioned armrests encourage lounging,designed with modernity & elegance, choose the option that suits airport office.combination construction structure are made in moisture content shall be less than 10%. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial (common) and moisture proof plywood .understructure frame shall be constructed from 18 mm thick kiln-dried german beech wood framing is highly durable.the complete structure shall be covered by p.u.foam fixed with adhesive glue ,the frame shall be padded with high resilience polyurethane foam having 28 (±2) kg per cu meter density in seat it shall be stack foam of 50mm thik,40mm thick back foam having 20 (±2) kg per cu meter density foam used ,there shall be cushion arm 10mm thick provided padded with high resilience polyurethane foam having density 20 (±2) kg per cu meter . the complete stack foam structure shall be covered with premium leatherette in premium leatherette with solid wood colour, it complements the modish solid wood legs. ( seat: 545mm(d) 525mm(h) , back height @ 400mm ) Colour and all complete as per direction & satisfaction of Engineer-Incharge.

Providing and palcing baby crib with mattress . crib approx. dimension: 1160 mm (l) x 600 mm (w) x 880 mm (h ) , made of fsc certified 36mm thick wooden plank made of commercial ply with mdf and veneer finish of size 45 mm with 2 level level height adjustment. 60 mm lockable castors shall be given for smooth movement . head and foorest top edges shale be curved with beech wood. mattress shall be provided of thickness 100 mm as per required sizes Colour & all complete as per direction & satisfaction of engineer-incharge.

Supplying, fixing & placing modular non sharing laptop charging workstation of size 600 mm (w) x 1350 mm (L) . medium height partition up to 900 mm height. workstation shall be non sharing with 67 mm thick sliding tile base partition of 1200mm height with required table top. The top trim, top bar, mid bar, vertical bar, raceway, skirting shall be made up of aluminium extrusions (pre-treated) and duly powder coated with polyester powder coating 50-60 micron thick. the trims shall have the size 67mm x 19mm with 1.5mm thick covered with die cast end caps on joints 2 ways, 3 ways & 4 ways (l-cover for corner, t-cover for middle section wherever required). the aluminium raceway shall be situated below the worktop with 1.4 mm cover thickness and 2mm back thickness as per requirement of in laying the electrical management and carrying the wire horizontally. The exposed vertical and horizontal faces of the frames shall be snap fitted with trims. Corian table top tile and bottom tile shall be situated at both sides of the user and below the work top respectively. the partition shall have concealed wire management capabilities and should be engaged for responsive and safe operations of power, telecommunications and data (lan) and has separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. slots/cut-outs should be given on raceways to fix all electrical and data points. single sided PVC wire manager should be enclosed at table top. Adjustable leveller shoe shall be provided at bottom of the partition to avoid scratches on the floor. particle board of grade II of is level. Table top made of 36mm thick fsc certified factory pressed commercial ply with 12 mm thick corian both side of approved shade and brand. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. Under structure shall be 50mm x 50 mm metal/MS polyester powder coating 50-60 micron thick legs. Each workstation shall have charging facility for laptops & mobile phones 6 module electrical plate with 2 nos. 16 amp. 5 pin AC switch socket combine, 1 USB charging and 1 universal charging point with 1 switch. Including wiring should be done with min 03 mtr. & up to nearest power supply point as per site 3 Core x 1.5 Sq.mm PVC insulated Flame-Retardant Low Smoke (FRLS) Iead in PVC conduit and 5 Amp 3 pin top for taking electrical supply as per requirement. (All accessories should be ISI Marked). Colour & all complete as per direction & satisfaction of engineer-incharge.

Supplying and placing of workstation chair with fixed base and revolving seat. size of chair shall be (w)570mm x (d)570mm x (h)990mm. chair seat height shall be 490mm from floor. understructure made of stainless steel with four progned with studs and have swivel mechnism with pneumatic height lift. Seat and back 40 ± 2 mm thick polyurethane foam with density 32 (±2) kg/m3 for best quality cushioning in seat and back with leaterette finish with foam pad on seat.The gas lift shall be 100 mm - 120mm telescopic haudraulic. Colour & all complete as per direction & satisfaction of engineer-incharge.

Bidder Name

Amount in Words

Maple Mouldings Private Limited (BID ID -884962)

Beech Impex Private Limited (BID ID -882990)

Palghar Plywood Products Pvt. Ltd. (BID ID -877576)

Maple Mouldings Private Limited (BID ID -884962)

Beech Impex Private Limited (BID ID -882990)