Supply and Installation of Photocatalytic Reactor

Photocatalytic Reactor

Minimun 8-Watt lamps, configured with not lessthan 6 top- and 8 side-lamp positions, controlled by switches. Dimensions: Minimum - External: 18” wide, 21” deep (with exhaust) and 16.5” high (46 x 53 x42 cm), Internal: 12” wide, 12” deep and 8.5” high (30 x 30 x 22 cm) Input Power Rating: 220 VAC, 50/60 Hz cycle, 3 Amps Lamp Power For use with 8 Watt lamps with F8T5 connectors. Approximate length 12 inches. Housing Material: External: Stainless Steel Internal (chamber): Al 5052-H32 (aluminum alloy) Ambient Temperature: Can be maintain between 10 ºC and 35 ºC Chamber Temperature: Not higher than 3-4 ºC above room temperature Humidity: Must be between 0% and 95% (non-condensing) Portable Carousel: Bottom plate height: approx. 2.5” above chamber floor, Must hold atleast 16 tubes, Speed: Minimum 4 RPM, Batteries Required, Diameter: 5”, Must accommodate samples in test tubes of up to 5/8” (16mm) in diameter Portable Turntable: Diameter: 9 3/16 inches, Height: approx. 2.5” above chamber floor, Speed: 4 RPM, Batteries Required Magnetic Stirrer: Speed: adjustable, Min speed: 100 RPM, Max speed: 1000 RPM, Max volume that can be stirred: 0.26 gallons (1L) Power meter: Calibration factor for visible light provided by manufacturer, Calibration factor for Photo reactor lamps provided by Manufacter, Requires 9 V transistor type battery (one provided), Display: 3.5” LCD, Sampling time: 0.4 sec, Operating temperature: 0 - 50ºC at a maximum of 80% relative humidity, Batteries Required Gas inlet: Rear mounted bulkhead gas connector, Gas should not dissipate in the chamber, should be used with environmental chamber only. Hour Meter: Built-in to the unit, Keeps track of the number of hours the unit has been in operation, Safe Exhaust: ABS Material, Exhaust tube provided: 4” diameter, max length: ~ 8’, Built-in fan: 3100 RPM, Airflow: 110 CFM Safety Interlock: Turns off lamps when door is open, Indicator LED’s signal if the door is open and if power is running to the lamps Additional Lamps required: BLUE LED lamp (~445-465 nm) 01 No , GREEN LED lamp (~510-530 nm) 01 No., AMBER LED lamp (~580-600 nm) 01 no., RED LED lamp (~630-650 nm) 01 No Product and Service Warranty: 1 year (Minimum), 3 years (Preferably)