PROVISION OF ADDN ALTN AND SPL REPAIR OF BLDG NO T-SA 42 (SINGLE OFFR ACCN) AT SFF ACADEMY THROUGH MES DEHRADUN

Amount

Dismantling of plain or corrugated steel sheeting any gauge, thicknes, including Naintak or similar pattern roof coverings of any description etc complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling framed timber scantling 40 sqcm and over in section, in any position all as specified and directed.

Dismantling unframed timber scantling 40 sqcm and over in section,in any position all as specified and directed.

Dismantling wall and ceiling boards (fibre,pulp,insulation, etc) or insulation boards/slabs/blankets,any thickness,including cover fillets, in any position complete all as specified and directed.

S& F 25mm thick insulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall complete all as specified and directed.

S&F 605 X605 mm GI frame work for for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from suffit at approx 900 mm centre to centre with GI cleats and steel expansion fastner with and including ceiling section (not exc 1.2 m length)of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10 .5 mm fixed to the intermediate channel with connecting clieats across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws in ceiling flats or sloping complete all as specified and as directed.

Dismantling boarding, any descripition, fixed in any position with nail complete all as specified and directed.

M&L for IInd class hardwood in scantlings timber fixed, clean sawn complete all as specified and directed.

M&L IInd class hardwood in scantlings timber framed and fixed, clean sawn complete all as specified and directed.

S&F IInd class hardwood 25mm thick boarding, with nails, clean swawn with butt joint in any situation (Except fooring and skirting) complete all as specified and directed.

Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing the debris outside from defence land complete all as specified and directed .

M&L for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregates) as in sub base, plinth protection, path/steps completel all as specified and directed.

M&L for Chequered cement concrete tiles of size 30 cm X 30 cm X 22-25 mm thick,set jointed and pointed in neat cement slurry and pointed with grey cement and pigments in floors laid over and including 15 mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as Directed.

S& F Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 complete complete all as specified and directed.

S& F Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in steps, skirting, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10 mm thick rendring as in backing coat in CM 1:4 complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 complete complete all as specified and directed.

S&F coloured Glazed ceramic tiles in vertical surface such as dado etc 350mmX250mmX 7 to 8mm /450mmX 350mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles fixed over and including 10mm thick rough cement plaster as in backing coat to receive tiles in CM 1:4 complete all as specified and as directed.

M&L for hardcore of broken stone broken or boulders n exc. 63mm deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface comploete all as specified and directed.

Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

S&F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed.

S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed.

S&F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed.

S&F as 15mm bore CP brass basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.

S&F in repairs CP Wall Mixer (3 in 1) complete all as specified and as directed.

S&F 1000 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F PVC float valve, high pressure with polythene float and fly nut complete screwed for PVC pipe and fixed in 20mm bore pipe complete all as specified and as directed.

S & F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars , stiffeners , gusset plates, Fe-410- W(Gde E-250) quality B etc. complete all as specified and directed.

S&F Welded steel wire fabric (Mesh) Weight N. exc 4 kg per square metre any size and fixed to wood or steel members complete all as specified and as directed.

S&F in repairs vitreous china coloured wash hand basin with pedestal of size 55X40cm including waste coupling of PTMT, waste pipe including fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

S&F in repairs one piece EWC with soft close seat cover and twin flush fittings 660 x 365 x 765 mm (snow white) S trap / P Trap 300mm and fittings, including connection to trap and flushing pipe anti syphonic pipe etc complete all as specified and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F brass chromium plated /SS Tubular towel rail, 20mm dia, D type, 60cm long between flanges and including chromium plated brass screws and wooden /plastic cleats complete all as specified and as directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repair 20mm dia curtain rail/rod, mild steel, chromium plated with incl fixing brackets, stop, rollers etc complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks built in CM 1:6 straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and as directed.

Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, in half brick thick wall built in CM 1:4 straight or curved on plan to any radius with old size bricks complete all as specified and as directed.

M&L for 15mm thick rendering on other than fair faces of brick/ concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete allas specified and directed.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 2-3mm thick wall cary putty on new plastered surfaces of wall complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat alkali- resistant priming paint including preparation of newly plastered surfaces complete all as specified and as directed.

M&L for preparing old surfaces of wall and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resisitance as per IS 15489:2004, Alkali & fungal resistance dirt resisitance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10Sqm over and incl priming coat of exterior primer applied @ 0.90 litre/10sqm over new surface complete all as specified and directed by Engr-in-charge.

Taking down chowkhats or frames with shutter exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the freme) and removing from site complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and as directed.

S&F powder cooated(minimum thickness of powder coating 50 micron) anodised aluminium frame for door, window, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F powder coated (thickness powder coating not less than 50 micron) anodised aluminium door shutters aluminium section weighing 0.55kg/m including necesarry joining cleats glazing clips rubber neoprene packing,handle 2 Nos in each door ,hings anodised aluminum snap beading screw etc complete all as specified and as directed.

S&F powder coated (thickness powder coating not less than 50 micron) anodised aluminium window and ventilator shutters,fixed/Sliding type withour sash bar aluminium section weighing 0.55kg/m including necesarry joining cleats glazing clips rubber neoprene packing,handle 2 Nos in each door ,hings anodised aluminum snap beading screw etc complete all as specified and as directed.

S&F 4 mm sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane frosted, on one side etc complete all as specified and as directed.

S&F 4 mm sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane etc complete all as specified and as directed.

S&F 4 levers mild steel Mortice lock, verticla type, of size 100mm with keys complete all as specified and as directed.

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S & F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window /Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F 125 mm stainless steel butt hinges and necessary S/S screws complete all as specified and directed.

S & F 150 mm long aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.

S & F 125 mm long aluminium handle cost type anodised complete all as specified and directed.

M&L for 18-20mm thick granite (of any Type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone inclunding grinding and polishing laid over and including 15mm thick screed bed or bedding layer of mortar, in CM 1:4 complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed .

M&L for preparation of old previonusly treated wooden surfaces of any description, over 10 cm in width or girth , described and applying one coat of synthetic enamel paint complete all as specified and as directed .

S&F 100 mm dia bore (sand cast pipe) cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed .

S&F CI bends 100 mm dia Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed .

S&F 75mm dia bore (sand cast pipe) cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed .

S&F CI bends 75 mm dia Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed .

S&F 100 mm bore CI vent cowl complete all as specified and directed .

M&L 75 mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed .

M&L for cement concrete 1:4:8 type D-2 (Using 40mm graded stone agg) as in concrete bed to drain pipe for 100mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed .

Excavation in post holes (or similar holes) each not exc 0.5 cum getting out, returning filling in and rammin earth or broken rubble mixed with earth around in layers not exc 25 cm watering, and removing surplus soil to a distance not exc 50mtr and making good surface in soft/loose soil complete all as specified and directed .

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation, laying cable/pipes etc. and getting out in soft/ loose soil complete all as specified and directed .

M & L PCC 1:4:8 Type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed .

S&F Rolled mild steel Fe-410-W(Gde-E-250) quality-B in joist, channel, pipe, angle or tee sections fixed independently without connecting plates etc (cut to ordinary length i.e within 20 mm of the length indicated as directed complete all as specifed and as directed.

Returning filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm in soft / loose soil complete all as specified and directed.

Removing excavated material to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed .

M&L for 18/19 mm Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S & F Continuous (piano) hinges, Mild steel bright finish or electrogalvanised Width of flaps (when open) in 30mm complete all as specified and directed.

S&F of 75 mm Brass handles, cast type, polished bright complete all as specified and directed.

Supply, laying, connection and testing of 40mm bore, steel water tubing galvanised, medium grade with all fittings and fixtures laid in trenches etc complete all as specified and as directed.

All as per item No.91 above but 25 mm dia of pipe

S&F 40mm bore dia stop valves valves fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F 25mm bore dia stop valves valves fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F Gun metal gate valve 25 mm bore with iron wheel head by screwing/cutting of existing pipe lines including taking out defective gate valve any type complete all as specifed and directed.

S&F Gun metal gate valve 40 mm bore with iron wheel head by screwing/cutting of existing pipe lines including taking out defective gate valve any type complete all as specifed and directed.

S&F PP-R Gate Valves of Size 40 mm outer dia (brass insert) connect to PP-R pipe including taking down old unserviceable valve complete all as specifed and directed.

S&F PP-R Gate Valves of Size 40 mm outer dia (brass insert) connect to PP-R pipe including taking down old unserviceable valve complete all as specifed and directed.

Cutting cast iron/GI pipe upto 40/50 mm bore, in position for insertion of new tees of suitable size including jointing materials complete all as specified and directed.

M&L for masonry valve pit of size 600mmx 600mmx 600mm with MS Sheet cover and locking arrangement etc. complete all as specified and shown on TD drawings.

Taking down carefully existing aluminum/copper surface/concealed point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, lamp holder, regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces in CM 1:3 of walls, floors, ceiling etc including distempering to match with existing surfaces complete all as specified and directed.

One light point controlled by one 1-way modular switch.

One ceiling fan/Exhaust fan point controlled by one 1-way switch.

One three pin 5 Amp socket on same board.

One three pin 5 Amp socket on independent board

One light point controlled by two 2-way modular switches.

One call bell point controlled by one bell switch.

All as per item No.102 above but one 3 pin socket outlet 15 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm.

All as per item No.102 above but with 4sqmm copper conductor cable with 4 sqmm PVC copper conductor cable as earth continuity conductor for one socket outlet 15/16 amps (AC/geyser) on independent board complete all as specified and directed.

S&F Lamp holder B-12 type, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

S&F modular switch 1 way 6A, 1 Module complete all as specified and directed.

S&F modular socket 6A, 2/3 pin combined 2 Module complete all as specified and directed.

S&F modular switch 1 way 16A, 1 Module with indicator lamp complete all as specified and directed.

S&F modular socket 6A/16A, 2/3 pin combined 2 Module complete all as specified and directed.

S&F modular switch 2 way 6A, 1 Module complete all as specified and directed.

S&F modular bell push 6A, 1 Module complete all as specified and directed.

S&F ding dong bell AC 230 V single pole complete all as specified and directed.

S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 230 V AC complete all as specified and directed.

S&F modular white cover plate with frame, 2 module complete all as specified and directed.

S&F modular white cover plate with frame, 3 module complete all as specified and directed.

S&F modular white cover plate with frame, 8 module complete all as specified and directed.

S&F wall mounted LED batten fitting, 22 W, 230 volts AC, T-8, cool white not less than 1200mm extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver with and including 22 W LED tube rod complete and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to walls including taking down existing fitting complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement of LED inverter bulb 9 watt WW retrofit type works on AC Normal mode and DC supply in inverter mode with inbuilt battery back up of up to 4 hours, high efficiency high lumens output complete all as specified and directed.

S&F LED decorative wall light 20W luminaires including LED light driver holder and warm white bulb of suitable size 2 nos connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED wall mounted study lamp 3.0W, 4V, 2000mAh. including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F exhaust fan metalic body copper wound AC single phase 230 V of size 300 mm sweep with blades, frame and louvers including taking down old unserviceable fan, sealing cable end and deposited to E/M store yard complete all as specified and directed.

S&F Sheet metal enclosure, single pole and neutral with two pin and earth plug and socket with MCB 20A, suitable for protection of appliances like AC/Geyser suitable for flush mounting and surface mounting complete all as specified and directed.

S&F electric water heater stoarage type steel body with copper inner tank & heating element upto 2KW capacity 25Ltr, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece including taking down old unserviceable geyser and deposited to E/M store yard complete all as specified and directed.

All as per item No.126 above but submain wiring with cable 2x6.0 sqmm + 1x6.0 sqmm as earth wire complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with bracket made of 32mm dia GI pipe light grade 1.2m long bent to shape complete all as specified and directed.

S&F VTPN MCCB DB 4 way with metal double door (IP 43 IK 09 protection) suitable for one FP MCCB 63 Amps as incomer and 12 SP MCBs or any combination of SP/TP MCBS outgoings complete all as specified and directed. (MCCB and MCBs shall be measured and paid separately)

S&F MCCB 415 Volt 16 KA 4 pole 63 Amp magnetic release adjustable range as incoming with fixing arrangement complete all as specified and directed.

S&F MCB single pole, 240 volt 10 KA, 6-32 Amp 'B' series complete all as specified and directed.

M&L in replacement of TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped in concealed PVC conduit suitable for television wiring including all necessary connections from terminal box to TV socket, drawn in separate concealed PVC conduit complete all as specified and directed.

M&L in replacement of Telephone Wiring with 0.5 mm dia FRLS-H, 2 pair PVC insulated annealed copper conductor, unarmored telephone cable in the existing concealed PVC conduit suitable for television wiring including all necessary connections from terminal box to socket, drawn in separate concealed PVC conduit complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F rigid non metallic PVC conduit of 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc but exclusive junction/terminal boxes for computer/TV/ telephone/ LAN networking and communication system complete all as specified & directed.

M&L in replacement of Modular TV socket 01 Module size socket with inner and outer frame plate matching with surrounding for mounting modular tv socket as per site requirement complete all as specified and directed.

M&L in replacement of Modular Telephone socket (RJ 11 Socket Jack) 01 Module size socket with inner and outer frame plate matching with surrounding for mounting modular Telephone socket as per site requirement complete all as specified and directed.

S&F in replacement Metal flush box zinc oxide plated 2 module for mounting modular TV/Telephone/LAN socket complete all as specified and as directed.

M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mm x 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-I 2009 and testing on completion all as specified and directed.

S&F post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant with driver and lampcomplete all as specified and directed.

S&F bollard light LED mushroom type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant with driver and lamp complete all as specified and directed.

S&F LED spike light 5-12 watt weatherised IP65 complete all as specified and directed.

S&F ground burial light 18/20Watt, 240Volts compact and robust design with die cast aluminium housing and stainless trim, IP68 waterproof connectors complete all as specified and directed.

Supply and laying 50mm dia GI pipe medium grade including fittings for fixing post top lantern and under road crossing complete all as specified and directed.

M&L for single pointed air termination copper rod, 12 mm dia and 300 mm long complete all as specified and directed.

S&F 25 x3 mm aluminium strip as in earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required with saddles / insulators at 50cm distance, complete all as specified and directed.

S&F 32 x6 mm GI strip as in earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required for grid with saddles / insulators at 50cm distance, complete all as specified and directed.

M&L for test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws complete all as specified and directed.

S&F GI tubing, medium grade, 40 mm bore, for lighting protection rod fixing on roof with plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate, complete all as specified and directed. Note: PCC shall be measured and paid seperately under respective item.

M&L for plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) in foundation of pipe supports/platform etc. including necessary form work complete all as specified and as directed.

S&F rolled mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality 'B' complete all as specified and directed.

Supply, laying and testing LT under ground cable XLPE insulated sheathed and armoured with aluminium stranded conductors, 1100 Volts grade of size 16 Sqmm 4 core laid in trenches complete all as specified and directed. Note: Earth work, sand and bricks will be measured and paid separately under relevant items.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 mtr deep for laying cable etc and getting out in hard/dense soil complete all as specified and directed.

S&F GI pipe light grade 40mm dia for cable protection fixed to poles / bldg incl two Nos MS clamps made to shape of 25 x 3mm MS flat and painting with two coats synthetic enamel paint over a coat of primer incl bolt, nut, washer etc.complete all as specified and directed.

S & F MCCB 415 Volt 16 KA 3 pole 100 Amp magnetic release adjustable range as incoming with fixing arrangement complete all as specified and directed.

Supply & laying of DWC (double Wall corrugated) HDPE polyethiline pipe Outer dia 50mm and inner dia 38 mm including couplers, bends, cap etc. with smooth internal and profiled external surface for non pressure under ground cable complete all as secified and directed.

HARJINDER PAL SINGH (BID ID -3422530)

J P CONSTRUCTION (BID ID -3426158)

MOHAN SINGH AND SONS (BID ID -3425414)