Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.4 LAccepted-AOC VIII BADWALA ARKEDIA GRANT PO PREMNAGAR DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L1 | Accepted-AOC Acceptance of contract | |
| 2 | L2₹37.1 L+₹2.3 L (6.61%)Rejected-AOC 107 NEAR POST OFFICE PRENAGAR DEHRADUN 248 007 UK | DEHRADUN | UTTARAKHAND | 248007 | L2 | Rejected-AOC R | |
| 3 | L3₹38.0 L+₹3.2 L (9.19%)Rejected-AOC 11 CIVIL LINES ROORKEE 247667 DISTT HARDWAR UK | HARIDWAR | UTTARAKHAND | 247667 | L3 | Rejected-AOC R | |
| 4 | L4₹38 L+₹3.2 L (9.23%)Rejected-AOC WING NO 7 2 10 PREMNAGAR DEHRADUN UK | L4 | Rejected-AOC R |
Tender Value
₹49.7 L
EMD Value
₹99,500
Closing Date
14 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
PROVN OF CERTAIN SRW AND REVENUE WORKS AT IMA DEHRADUN
2023_MES_618931_1
GE/IMA/T-52 of 2023-2024 9352/E8
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE IMA Dehradun
Refer NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA Dehradun
₹99,500
Yes
12 Dec 2023
15 Sept 2023
16 Oct 2023
16 Sept 2023
14 Oct 2023
30 Sept 2023
Amount
Dismantling AC corrugated, semicorrugated sheet including ridge in roof covering complete all as directed.
S&F pre-painted galvalume aluminium zinc coating GI based Plain steeel sheet 0.50mm thick an colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall fixed with self tapping screws all as specified. Make :- Tata(blue scope)/HIL Ltd(Brand- Charminar)/JSW Steel (color on+)-
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steeel sheet 0.50mm thick an colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall fixed with self tapping screws all as specified. Make :- Tata(blue scope)/HIL Ltd(Brand- Charminar)/JSW Steel (color on+)
Dismantling timber scantling 40 Sq cm and over in section .in any posision complete all as directed.
M&L for 2nd class hard wood in scantling.complete all as specified.
S&F of Structural steel, rolled section as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe-410 W (Gde-E-250)all as specified and directed. Make:- Tata/Jindal/JSW steel
M&L for Preparing surfaces of wood and wood based materials, new or old of any description and girth not otherwise described, and treated with tar or coal tar black paint complete all as specified.
Preparation new steel surfaces exc. 10 cm width or girth and applying two coats of synthetic enemelled paint over one coat of red oxide primer complete all as specified and directed.
M & L for two coats of cement based paint on newly plastered surface over a coat of chalk whiting by mechanical means including all preparation complete all as specified and directed.
M & L for preparation of old decorated surfaces (plastered/ un-plastered) of walls including removing all vegetation etc and applying one coat cement based paint on walls by mechanical means complete all as specified and directed.
Preparation of new surfaces and applying two coat of distemper oil emulsion (OBD) over a coat of primer by mechanical means complete all as specified and directed.
Preparation of old surfaces of wall and applying one coat of distemper oil emulsion (OBD) by mechanical means ,complete all as specified and directed.
Preparation old painted wooden surfaces any description over 10 cm width or girth and applying One coat of synthetic enemelled paint including all preparation complete all as specified and directed.
Demolition of brick work/ stone masonay built in cement mortar including all quoins jamb pillars etc and removal out side the IMA premises complete all as directed.
M & L for brick work with sub class 'B' bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks complete all as specified and directed.
All as per item No. 15 above but Except bricks.
Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc and removal out side the IMA premises complete as specified.
M&L for 15 mm thick ready mix internal/external/ceiling plaster on brick or concrete surfaces including providing & mixing water proofing compound as per manufacturers specification, surface finished even & fair, all complete asspecified and directed Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom)/ unicrete.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as directed.
S&F 4 mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605 mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres all as specified and as directed by Engineer-in charge (size of main tee 38 mmX25 mmX 1.4 mm, cross tee 38 mm X 25 mm X 1.4 mm angle along walls 38 mm X 25 mm X 2.0 mm) and two coats of oil bound emulsion complete all as specified and directed including dismantling boarding any description fixed in any position with nails.
Demolition of cement concrete in ground floor and pavings n.exc. 15 Cm thick below or above ground level. (un-renforced) complete all as directed.
M&L for PCC 1:4:8 type D-2 (40 mm graded crushed stone aggregate) as in sub base filling and mass concrete complete finished evenand fair all as specified and directed.
M & L for chequered polished cement factory made tiles heavy duty, 30CM X 30CM X 22 mm thick, set, jointed in neat cement slurry and pointed in grout to match the floor complete all as specified. & directed, including screed bed or bedding layer of cement mortar 15 mm thick 1:6 complete all as specified and directed.Make : Tulip/Jain Tiles/Ferrocon Dehradun.
M&L for PCC1:2:4 type B-1 (using 20mm crushed stone agg)as in bed plate cill steps coping, similar bands kerb etc complete all as specified and directed.
Excavation in post holes (similar holes) each n exc 0.5 Cm getting out returning filling in and ramming earth or broken boulders mixed with earth around in layers not exc 25 Cm watering and removing surplus soil to distance n exc 50 m and making good surface in hard / dense soil complete all as directed.
M&L for PCC 1:2:4 type B-2 (using 20 mm graded crushed stone aggregade) in foundation for post holes complete all as specified.
Surface excavation n exc 30 Cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified.
M& L for Brick work with sub class ‘B’ bricks (old size), straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L for Rendering 15mm thick plaster on other fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.
S & F mild steel joints angle channel or tee section and fix independently in concrete as fencing post and similar works including flat iron fixing with nut bolts conforming to Fe 290 Gde E- 165, complete all as specified. Make :- Tata/Jindal/JSW steel.
S & F mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed to be fitted with washers and one hexagonal or square nut, exc. 22.5 cm but n exc. 30 cm long dia of shank 11 to 15mm complete all as specified.
S&F PVC coated MS galvanised chain link fencing of size 75 x 75mm or less of any type of standard, rail straining bolts etc, dia not less 4 mm total including provision of binding wire as directed.
S&F MS round bars 10mm dia & over cut to length bent to shape required incl cranking bending spirally for hoping for colm and backing ends and binding with & include MS wire (a headed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410W (grade E-250) quality A or Fe 290 (grade E- 165) complete all as specified.
Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) complete all as directed.
M/s Vinod Singh Negi
Alankar Traders
M/S S P BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .