Development of office premises at 1st floor Gauridad - Rajkot

Given Schedule of Rates (SOR) to be treated in conjunction with Scope of Work/services/supply and terms & conditions given along with enquiry documents.

The above prices are for the complete scope of wok /services/ supplies as defined in the bid/enquiry document. Any materials, works/services required for completion of the work as per scope but not defined in the SOR (schedule of rates), the same is deemed to be included in the quoted price as above.

The bidder shall quote the prices strictly as per the price bid format. Any bid not conforming to the price bid format shall be rejected.

Rates quoted by the bidder shall remain firm and fixed till the successful completion of work and shall not be revised on any account whatsoever.

The quantity mentioned in SOR is indicative and for evaluation purpose only. Actual quantity may vary up to any extent without any change in unit price or terms & conditions of the bid and the bidding documents within Contract Period.

If the price bid submitted by bidder elsewhere other than Price bid (SOR) stage, the bid shall be rejected and shall not be considered for further bid evaluation.

In case of mixed supply, composite supply and works contract, a single rate of GST shall be applicable.

The bid shall be evaluated on the basis of total cost to the company.

After price bid opening and evaluation, Reverse Auction amongst qualified bidders after eliminating H1 bidder (if 3 or less bidders qualified for RA, all bidders shall be allowed for RA) shall be carried out through e-auction portal.

Owner reserves the right to cancel and/or alter bidding process at any stage without assigning any reason. Owner also reserves the right to reject any or all of the bids received at its discretion, without assigning any reasons whatsoever.

GTL reserves the right to reject any or all bid without giving any reason whatsoever.

Bidder to quote there rates against each line items, failing to which the material/service shall be treated as free supply/services.

Tender no.: GTL/PROC/2026/04/O/487

(n)Procure Tender ID: 307802

(Amount in INR excl. GST)

SOR Code

Demolition Work & Excavation

RCC Work

Masonary, Plastering & Pointing Work

Flooring & Tileing Work

14022A + Epoxy

14009CA + Epoxy

14021A + epoxy

Terrace Waterproofing Work

Painting & Polishing Work

Furnishing & Fabrication Work

Plumbing & Sanitary Work

GWSSB SOR It. No. 4 , Pg. No. 8+37

GWSSB SOR It. No. 4 , Pg. No. 8+37

Fabrication Work

Tender no.: GTL/PROC/2026/04/O/487

(n)Procure Tender ID: 307802

(Amount in INR excl. GST)

Item Code

Providing, laying and jointing in true line and level U.P.V.C. pipe (SCH-80) line including fitting of Astral / Supreme / Finolex / Ajay make. Pipe shall be fixed on the wall with help of clamp at every two meter c/c or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 75 mm diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Astral make

Providing, laying and jointing in true line and level 110 mm diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Astral make

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls. Astral make

Tender no.: GTL/PROC/2026/04/O/487

(n)Procure Tender ID: 307802

(Amount in INR excl. GST)

Item Description of Goods/Services

Internal Wiring

Point Wiring (Includes but not limited to SITC of Conduits, bends,wires, way boxes, switches, sockets etc. in totality required for complete work.)

Power Points Supplying , Installing , Testing & Commissioning computer power supply point with 2 no of 6 amp 3 pin universal plug with 1 no 10 A Switch with indicator, wiring of computer point will be done through 2 nos.of 2.5 sq. mm Cu. wires as phase & Neutral and 1 nos. of 1.5 sq.mm.as earth wire.

MAINS and Conduit :

Supplying and Laying mains with 2 nos. of 4 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and 1 no 2.5 sq.mm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approved with all required necessary accessories. (Without pipe)

Supplying and Laying mains with 2 nos. of 2.5 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and 1 no 1.5 sq.mm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approved with all required necessary accessories. (Without pipe)

Supplying and Laying mains with 2 nos. of 6.0 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and 1 no 4.0 sq.mm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approved with all required necessary accessories. (Without pipe)

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size.

Supplying and Laying of power cable including lugs and glands and all sundry materials. Including excavation of trench minimum 900mm deep having bottom layer of sand then Laying pipe for cable and refilling trench with sand and top layer of brick as per details by engineer incharge, corecuts and any chasing in wall/RCC, clamping on and making it good.

Providing and erecting 1.5 mm thick ISI mark (embossed) MMS RIGID PVC PIPES of following size complete erected with necessary PVC fittings and Junction boxes fixed with adhesive solution and Clamps in concealed manner in wall/slab, laid in approved manner with complete plastering by cement mortar & finishing the surface to match the wall/ceiling.

Extra Metal junction box with 4 to 6 nos.X25 mm opening from all sides laid in flooring & on wall.

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board necessary IP-52/56 and above protection as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip complete with top entry. The Panel shall be painted with epoxy powder coating. Panel shall be manufacture at CPRI approved maufacturer. Cable entry may be top, but same may be confirmed at stage of GA drawing approval by engineer in charge (The rates includes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base beams)

Earthing & Lightning Protection

GI Earth Electrodes

Earth strip and wire

25 x 6 mm GI Flat strip(for Lighting protection)

Single core stranded 2.5 Sqmm Cu green earthing wire

25mm dia 1500mm long GI rod for lightning protection (VAT method)

50 x 8 mm GI Flat strip(for body and neutral earths)

Ladder type Cable tray - Galvanized steel fabricated out of hot rolled sheet steel with rigid welded ladder type 300X50X0.2 mm wide straight run

SITC of Air Cooled input voltage 420V(+/-20%), 230v(+/-20%), 48-53Hz, Output voltage in 1% variation, 45kVA Servo Stabilizer as per specs attached.

SITC of 3 Phase 10kVA onine UPS with 120min Battery back and boost charge configuration as per specs attached

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20 of following wottage and type

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated,1200mm sweep Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for Speed Control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required

Dismentaling of existing DG cable from DG to existing GF panel including earthing and or any accessories

Dismentaling of existing Lightening arreaster and all its accessories

Dismentalling and retermination of main cable along with modification in meter box and SFU box as per SLD

Dismentalling of existing light fixture from terrace and reinstallation of existing lighting fixture with new wiring(2.5sqmm(L+N) and 1.5sqmm (E)) at new terrace

Laisoning in GEB for load increment of existing GEB connectiin as per the load list. Statutory fees only will be paid by GSPL, Rest in the scope of this BOQ

Tender no.: GTL/PROC/2026/04/O/487

(n)Procure Tender ID: 307802

(Amount in INR excl. GST)

Item Description of Goods/Services

Telephone Distribution

SITC of specified make Cat 6 UTP cable 4 pair data wire of specified make to be drawn in PVC pipe of 25 mm dia of specified make / Race way, with the cost of pipe included. (the wire is to be drawn from EPBX of respective area to terminal point).

Telephone Outlet Point: SITC of specified make outlet point in following modules

Supplying & erecting push button type telephone instrument having speaker phone Caller ID & hands free dialing system & 30 memories with display system (a) Single line BEETEL/panasonic or equivalent make

SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt Auto attendant facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / EI & VOIP program me through Analog telephone digital key from Ethernet, public address cord, shall have unrestricted simultaneous dialing facility, QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class of Service, Quick Dial-Single Digit dialing of any two external number, Once only ring device, Boss/Secretary-Do not disturb Facility, Power Down Mode, Hot Line, Hot Outward Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer, Call transfer while Ringing with Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF, CLI Base routing Internet Ready Port, External Music Port, Call Budgeting, Call Most Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Fax Homing, Global Directory Printing with following capacities. System shall include required MDF Krone module and operator console.

Data Distribution:

Supply and laying of specified make Cat 6 UTP cable 4 pair data wire of specified make to be done in PVC pipe of 25 mm dia of specified make / Race way, with the cost of pipe included . ( the wire is to be drawn from LAN switch of respective area to outlet point).

Data Outlet Point: Supplying, installing of the specified make suitable for Data outlet socket RJ 45 (jack type).

Data Distribution:

Fire Alarm System SITC of following jobs and Items complete in all respect as per IS standards and specifications.

Tender no.: GTL/PROC/2026/04/O/487

(n)Procure Tender ID: 307802

(Amount in INR excl. GST)

Item Description of Goods/Services

Airconditioning Units(5 star Inverter AC with gas R410 or better): SITC of following tonnage Split AC Unit at site including epoxy coated metal stands and brackets etc. with anchor fastners etc. complete and all including intial gas charging & filling considering extra length pipes, testing, commissioning etc. complete in normal working conditions. The work is including all civil & jari making/filling, PUF insulation in holes' work complete. The units to carry standard guarantee/warrenty clauses as per brands' standard policy prevailing at the time of installation.

Supplying and erecting insulated pair of soft copper tubing open or concealed including power and control cable,necessary PVC drain pipes for Split AC machine up to 4 TR capacity

Tender no.: GTL/PROC/2026/04/O/487

(n)Procure Tender ID: 307802

(Amount in INR excl. GST)

SOR R&B Dist. (23-24)

Tender no.: GTL/PROC/2026/04/O/487

(n)Procure Tender ID: 307802

(Amount in INR excl. GST)

Item Description of Goods/Services

SITC of fire fighting pump having cast iron casting, alloy bronze impellers and diffusers, Pump shall be directly coupled to 2900 RPM 415 V 50 cys. AC 3 phase TEFC squirrel cage motor, Centrifugal 2280 LPM@ 70 Meter Head LPM from all causes including pressure gauges etc Diesel Pump) (KIRLOSKAR, AQUATEX, LUBI )

SITC of single outlet diffuser horizontal type centrifugal pump of capacity 180 LPM at top floor of the building. head with 2900 RPM Motor including all accessories. (Jockey Pump 10 HP) (KIRLOSKAR, AQUATEX, LUBI)

SITC of fire fighting pump having cast iron casting, alloy bronze impellers and diffusers, Pump shall bedirectly coupled to 2900 RPM 415 V 50 cys. AC 3 phase TEFC squirrel cage motor, Centrifugal 2280 LPM@ 70 Meter Head LPM from all causes including pressure gauges etc (Electic Pump) (KIRLOSKAR,OR Equivalent)

SITC of Main Fire Fighting Control Panel with Auto Control System Make With Siemens swich gear. (standard)

Supply & Installation of Y STAINER (KARTAR) 100NB

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Filling available excavated earth [Excluding rock] in trenches, plinth, sides of foundation etc. in layers not exceeding 20Cm. in depth consolidating each deposited layer by ramming and watering.

Providing and laying cement concrete 1:2:4 [1- Cement: 2- Coarse sand: 4-Graded stone aggregate 20MM nominal size] and curing complete excluding cost of formwork in foundation and plinth. [A] Foundation and plinth.

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 80 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel-304 cap and chain as required: Single Headed Stainless Steel

Supply & Installation of instantaneous pattern Branch Short SS-304 pipe, 16 mm dia. nozzle conforming to IS 903, suitable for inter connection to hose pipe, coupling complete as required.

Supply & Installation of Fire fighting Hose Pipe type-A (as per IS : 636) of 63 mm dia, 2L X 15 m length. Hose shall be complete with ISI marked SS-304 male & female coupling (IS:903) with SS wire binding. NEW AGE

Supply, installation, Testing and Commissioning of Fire Hose Cabinet made powder coated M.S. sheet having DOUBLE opening glazedshutter including necessary locking arrangement by allan key, stove enamelled Fire red finish with "Fire Hose" marked on C45 front, suitable for housing 2 nos. Hose pipe, 1 No. branch pipe and nozzle spanner .

Supplying and fixing first-aid Hose Reel Drum with MS construction spray painted in post . office red, conforming to IS 884 complete with the following as required. 20/25 mm nominal internal dia first-aid hose reel for firefighting 30 mtrs. length as per as per IS 884:1985 (Latest Edition) - 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 50 m( Drum Type )

Supply, Installation, Testing and Commissioning of 2 way Fire Brigade Inlet having 63 mm dia inlet with blank cap and chain with necessary fittings, flanges .& butterfly valve (NEW AGE)

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS: 13095 of following sizes as required: 100NB (MIT/KARTAR)

Cast Iron Non-Return valve (bolted cover) Swing check type, asper IS: 5312, PN-1.6 including companion flanges 100 NB (MIT/KARTAR)

Cast Iron Foot Valve with strainer of size 100 NB

Supplying installing testing & commissioning of 100 mm dia. Pressure gauge 1% Accuracy direct bottom 3/8" BSP connection in brass socket & Range 0 to 10 Kg/Cm2 etc. necessary as directed by Engineer in Charge. (RAMCO)

Providing and Fixing pressure switch in M.S. Pipe line including connection etc. as required. (Danfoss/LEEFO)

Structural support for piping and inside pump house complete with painting APPROX.

Providing and Fixing 25 mm dia. Air Released valve of Raising Main Line. For Air Release including supply, installing, testing and commissioning etc. complete as directed by Engineer in charge.

Supplying & erecting Carbon Dioxide (CO 2 ) fire extinguisher of 4.5 kg. capacity cartridge type conform to 15683:2018 (or Latest Amendment) complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Supplying and erecting Stored pressure ABC. type Fire Extinguisher 6 kg, N2 as propellent gas, MAP 90 powder and brackets conforming to / IS 15683: 2018 (or Latest Edition) and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete.

Design, Supply & Installation of Safety Signage approved make made of zinc sulphide based glow in the dark rigid sheet with high luminous property enclosed in a transparent weather proof U/V stabilized plastic pasted on 3mm thick clear acrylic sheet/ foam sheet such as ASSEMBLY POINT, EXIT, EMERGENCY EXIT, DO NOT USE LIFT IN CASE OF FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE EXIT, STAIRCASE STRIP, FIRE ALARM CALL POINT, FIRE EXTINGUISHER, How to operate Fire extinguishers (in English, Hindi and Local Language – Gujarati with pictorial) FLOOR EVACUATION PLAN etc. completed as directed by engineer in charge.

Supplying, installation, testing and commissioning sector detection conventional panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required as per NB code 2016 Part 4. 2 / 4 Zone Alarm control Panel BISH TECH

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. BISH TECH

Supply, Installlation of SS Ball valve of size 100 mm dia S.S 304

Electric supply for fire pump

Power cable laying (including termination) from MCC panel to motor – XLPE insulated, armored copper/aluminum conductor, 4 core, 10/16/25 sq.mm as per motor rating and site requirement

Motor starter panel (DOL/Star-Delta/Soft Starter/VFD – specify type), complete with MCCB, contactor, OLR, wiring, and control push buttons.

Cable tray supply and installation – perforated/trunking type, including supports, bends, tees, covers etc(galvanized iron)

Earthing of motor body and panel using GI wire including lugs, bolts, and termination.

Control cabling from starter panel to local push button station, including conduits/clamps/termination.

Local push button station (ON/OFF) with IP65 enclosure for remote operation.

Supplys and installation for diesel pumps

Control panel for diesel engine operation, including key start, battery, gauges (RPM, temp, oil pressure), emergency stop, and protection features.

Battery for starting system including cables, connectors, and charging system.

Electrical control panel for diesel pump with auto/manual changeover provision. Panel to include:

Local push-button station with Auto/Manual/Stop functions, IP65-rated enclosure.

Fire Hydrant System Testing And commissioning and NOC charges

Tender no.: GTL/PROC/2026/04/O/487

(n)Procure Tender ID: 307802

(Amount in INR excl. GST)

Item Description of Goods/Services

appx. Area/ Section size mm

Providing & fixing fire escape stairs in composite various sections complete as per design & drawing and a few of the following black polished seamless sections with onsite/factory fabrication, welding, polishing etc. complete complete including anchor fasterners and all sundry materials.

Tender no.: GTL/PROC/2026/04/O/487 (n)Procure Tender ID: 307802

Bid Reference

Clause No.

Section-II

Queries must be submitted in this format only through e-mail on GTL's contact details before deadline of query submission date as provided in RFP/ Amendments/ updated during pre-bid meeting.