Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.0 Cr
EMD Value
₹6.0 L
Closing Date
16 Oct 2026, 3:30 pm6d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
Kota NAD section-Replacement of old/dilapidated Type-ll Qtrs. (8 Units) in ADEN SGZ and ADEN/RMA sectionKOTA-NAD Section - Provision of New Type-III Quarter 04 units at SGZ=1, BWM=1, MKX=1,JHW=1 under ADEN/RMA and ADEN/SGZ
188-2026~WCR
188-2026
Open
Works - General
12 Months
Kota, Rajasthan
₹0
₹6.0 L
23 Sept 2026
23 Sept 2026
2 Oct 2026
177 items across 2 schedules · ₹3,38,26,725.56 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 1480 | 205.45 | 3,04,066 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 480 | 253.95 | 1,21,896 |
| 3 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 296 | 368.65 | 1,09,120.4 |
| 4 | All kinds of soil | cum | 384 | 104.5 | 40,128 |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 72 | 7,365.15 | 5,30,290.8 |
| 6 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 259 | 6,670.25 | 17,27,594.75 |
| 7 | Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. | Sqm | 80 | 669.55 | 53,564 |
| 8 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 529.5 | 307.95 | 1,63,059.53 |
| 9 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 908 | 766.55 | 6,96,027.4 |
| 10 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 960 | 608.35 | 5,84,016 |
| 11 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 993 | 804.25 | 7,98,620.25 |
| 12 | Under 20 cm wide | Metre | 160 | 181.9 | 29,104 |
| 13 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 47.75 | 814.95 | 38,913.86 |
| 14 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 4 | 9,673.5 | 38,694 |
| 15 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 42400 | 89.65 | 38,01,160 |
| 16 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 13100 | 89.65 | 11,74,415 |
| 17 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 144 | 8,683.8 | 12,50,467.2 |
| 18 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 230 | 8,825.35 | 20,29,830.5 |
| 19 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 120.5 | 10,306.2 | 12,41,897.1 |
| 20 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 210 | 10,477.75 | 22,00,327.5 |
| 21 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 128 | 688.45 | 88,121.6 |
| 22 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 300 | 8,414.65 | 25,24,395 |
| 23 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 172.25 | 8,190.9 | 14,10,882.53 |
| 24 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 140 | 6,653.45 | 9,31,483 |
| 25 | Area of slab upto 0.50 sqm | Sqm | 20.5 | 4,679.35 | 95,926.68 |
| 26 | Area of slab over 0.50 sqm | Sqm | 26 | 4,425.35 | 1,15,059.1 |
| 27 | Granite work | Metre | 48 | 418.85 | 20,104.8 |
| 28 | Each | 2.75 | 808.15 | 2,222.41 | |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 292 | 1,063.45 | 3,10,527.4 |
| 30 | Second class teak wood | cum | 4 | 1,31,576.95 | 5,26,307.8 |
| 31 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 80 | 3,086.1 | 2,46,888 |
| 32 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 57.5 | 2,015.75 | 1,15,905.63 |
| 33 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | Sqm | 137.5 | 401.4 | 55,192.5 |
| 34 | Second class teak wood | Sqm | 42.5 | 4,342.3 | 1,84,547.75 |
| 35 | 75x47x1.80 mm | Each | 117 | 64.2 | 7,511.4 |
| 36 | 300x16 mm | Each | 128 | 260.3 | 33,318.4 |
| 37 | 250x16 mm | Each | 32 | 234.9 | 7,516.8 |
| 38 | 150x10 mm | Each | 69 | 75.55 | 5,212.95 |
| 39 | 100x10 mm | Each | 122 | 58.65 | 7,155.3 |
| 40 | 125 mm | Each | 108 | 60.05 | 6,485.4 |
| 41 | 100 mm | Each | 128 | 53.25 | 6,816 |
| 42 | Twin rubber stopper | Each | 128 | 62.25 | 7,968 |
| 43 | With 2nd class teak wood beading 62X19 mm | Sqm | 102 | 1,404.25 | 1,43,233.5 |
| 44 | Fixing with adjustable lugs with split end tail to each jamb | Metre | 101 | 444.5 | 44,894.5 |
| 45 | Fixing with adjustable lugs with split end tail to each jamb | Metre | 32 | 471.25 | 15,080 |
| 46 | Hot finished welded type tubes | Kg | 480 | 154.9 | 74,352 |
| 47 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. | Each | 32 | 185.95 | 5,950.4 |
| 48 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 6200 | 142.3 | 8,82,260 |
| 49 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 164 | 612.25 | 1,00,409 |
| 50 | Dark shade pigment using ordinary cement | Sqm | 64 | 983.95 | 62,972.8 |
| 51 | 25 mm thick | Sqm | 112 | 1,706.6 | 1,91,139.2 |
| 52 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 19.75 | 935.6 | 18,478.1 |
| 53 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 40 | 1,107.05 | 44,282 |
| 54 | Size of Tile 600 x 600 mm | Sqm | 736 | 1,359.2 | 10,00,371.2 |
| 55 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 12.5 | 3,908.8 | 48,860 |
| 56 | 75 mm diameter | Metre | 80 | 213 | 17,040 |
| 57 | 110 mm diameter | Metre | 164 | 319.75 | 52,439 |
| 58 | 110x110x110 mm | Each | 37.5 | 190.75 | 7,153.13 |
| 59 | 75 mm bend | Each | 16 | 91.8 | 1,468.8 |
| 60 | 110 mm bend | Each | 56 | 132 | 7,392 |
| 61 | 1:4 (1 cement: 4 fine sand) | Sqm | 2000 | 339.7 | 6,79,400 |
| 62 | 1:6 (1 cement: 6 fine sand) | Sqm | 1600 | 324.3 | 5,18,880 |
| 63 | 1:6 (1 cement: 6 fine sand) | Sqm | 128 | 382.1 | 48,908.8 |
| 64 | 1:4 (1 cement: 4 fine sand) | Sqm | 51.75 | 406.1 | 21,015.68 |
| 65 | 20 mm cement plaster | Sqm | 80 | 507.85 | 40,628 |
| 66 | 1:3 (1 cement : 3 fine sand) | Sqm | 500 | 253.05 | 1,26,525 |
| 67 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 1000 | 214.3 | 2,14,300 |
| 68 | New work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm | 1960 | 162.55 | 3,18,598 |
| 69 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | Sqm | 1440 | 166.85 | 2,40,264 |
| 70 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 144 | 144.9 | 20,865.6 |
| 71 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 256 | 140.05 | 35,852.8 |
| 72 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Sqm | 80 | 191.4 | 15,312 |
| 73 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 1600 | 123.85 | 1,98,160 |
| 74 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 10 | 2,007.1 | 20,071 |
| 75 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 60 | 219.35 | 13,161 |
| 76 | Made of G.I. wire of dia 4 mm | Sqm | 208 | 859.5 | 1,78,776 |
| 77 | 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. | Sqm | 64 | 932.35 | 59,670.4 |
| 78 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 12 | 5,781.35 | 69,376.2 |
| 79 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 4 | 5,540.55 | 22,162.2 |
| 80 | White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap | Each | 16 | 1,318.35 | 21,093.6 |
| 81 | 610x460 mm bowl depth 200 mm | Each | 12 | 3,337.85 | 40,054.2 |
| 82 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 5 | 1,411.15 | 7,055.75 |
| 83 | 20 mm nominal dia Pipes | Metre | 60 | 325.1 | 19,506 |
| 84 | 25 mm nominal dia Pipes | Metre | 198 | 408.55 | 80,892.9 |
| 85 | 15 mm nominal dia Pipes | Metre | 168 | 441.15 | 74,113.2 |
| 86 | 20 mm nominal dia Pipes | Metre | 96 | 513.75 | 49,320 |
| 87 | 25 mm nominal dia Pipes | Metre | 98 | 626.05 | 61,352.9 |
| 88 | 15 mm dia nominal bore | Metre | 60 | 267.5 | 16,050 |
| 89 | 25 mm dia nominal bore | Metre | 208 | 417.95 | 86,933.6 |
| 90 | 40 mm dia nominal bore | Metre | 160 | 558.35 | 89,336 |
| 91 | 25 to 40 mm nominal bore | Each | 16 | 757.1 | 12,113.6 |
| 92 | 25 mm nominal bore | Each | 4 | 532.35 | 2,129.4 |
| 93 | 40 mm nominal bore | Each | 8 | 707.3 | 5,658.4 |
| 94 | 25 mm nominal bore | Each | 4 | 447 | 1,788 |
| 95 | 100 mm diameter | Each | 13 | 166.35 | 2,162.55 |
| 96 | 25 mm nominal bore | Each | 16 | 369.35 | 5,909.6 |
| 97 | 40 mm nominal bore | Each | 12 | 523.2 | 6,278.4 |
| 98 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 5900 | 9.7 | 57,230 |
| 99 | 15mm nominal bore | Each | 14 | 500.35 | 7,004.9 |
| 100 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 14 | 109.85 | 1,537.9 |
| 101 | 15 mm nominal bore, 165 mm long, weighing not less than 110 gms | Each | 56 | 156.65 | 8,772.4 |
| 102 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 32 | 103.15 | 3,300.8 |
| 103 | Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms | Each | 16 | 183.4 | 2,934.4 |
| 104 | 100 mm nominal dia | Each | 8 | 33.2 | 265.6 |
| 105 | 125 mm nominal dia with 25 mm waste hole | Each | 50 | 45.25 | 2,262.5 |
| 106 | 15 mm nominal bore, 105 mm long, weighing not less than 138 gms | Each | 8 | 161.55 | 1,292.4 |
| 107 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms | Each | 4 | 223.5 | 894 |
| 108 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms | Each | 16 | 136.6 | 2,185.6 |
| 109 | 150 mm dia. R.C.C. pipe | Metre | 40 | 493.1 | 19,724 |
| 110 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 144 | 466.3 | 67,147.2 |
| 111 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 512 | 564.8 | 2,89,177.6 |
| 112 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 80 | 1,019.8 | 81,584 |
| 113 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | cum | 19 | 7,510.75 | 1,42,704.25 |
| 114 | Cement mortar 1:3 (1 cement : 3 coarse sand) | cum | 30 | 14,275.75 | 4,28,272.5 |
| 115 | Frame size 45 x 70 mm | Metre | 120 | 632.25 | 75,870 |
| 116 | 30 mm thick | Sqm | 44 | 3,954 | 1,73,976 |
| Schedule total | ₹3,11,50,327.2 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ApprovedBrandListTill12.11.25.pdf
ATTACHMENT
ElectricalTechincalSpecification.pdf
ATTACHMENT
SpecificationofLEDLuminare-2026-11.pdf
ATTACHMENT
SCAFFOLDINGDRAWING4.80MHT1.pdf
ATTACHMENT
2026_08_12IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_12_compressed.pdf
ATTACHMENT
2026_08_12IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_12_compressed_1.pdf
ATTACHMENT
civilspecialcondition.pdf
ATTACHMENT
ElectricalspecialConditionrevised.pdf
ATTACHMENT
TENDERDOCUMENTFROM164-2026iNCLUDEDbgFORMAT.pdf
ATTACHMENT
ANNEXURE-PCECIRCULAR2016-17-ilovepdf-compressed1-compressed.pdf
ATTACHMENT
Vigilanceguidelines-PublicProcurement.pdf
ATTACHMENT
Acceptanceofe-BankGuaranteee-BGinWorksContractsandPGMS_PMS_PSSAGC2026_06_16.pdf
ATTACHMENT
2026_08_12IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_12_compressed_1.pdf
CORRIGENDUM
2026_08_12IndianRailwaysStandardGeneralConditionsofContractApril2022AdvanceCorrectionSlipNo_12_compressed.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .