SPECIAL REPAIR TO INTERNAL ROAD IN DWARKA VIHAR OTHER MINOR UNITS, ABDUL HAMID VIHAR AND EXISTING BLACK TOP ROAD FROM T JN TO WORKSHOP MANDIR/ EXIT GATE (400 METER) OF 241 FD WORKSHOP COY EME AT GANDHINAGAR MILITARY STATION

Amount

Material and labour for laying premix bituminous macadam (consolidated thickness 75mm or less) using graded crushed stone aggregate, grading 2 with nominal aggregate size 19mm, mixed with paving bitumen of grade VG-30 mixed at the rate of 4% by weight of total mix, rolled and compacted with 8 to 12 tonne power road roller to required camber and gradient complete all as specified and as directed. Note:- Mix will be prepared in Mix plant of suitable capacity.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud, existing grass on roads sweeping with brooms and finally fanning the cleaned surface with air compressor to remove all loose dust or dirt and applying evenly one priming/ tack coat with paving bituminous primer (VG-10) applied at the rate of 5 Kg per 10 Sqm heated on requisite temperature by using mechanical sprayer complete all as specified and as directed.

Material and labour for laying of bituminous premixed ashphaltic semi dense concrete, 30mm consolidated thickness with coarse aggregate of grading 1 as per MORTH specification in single layer using paving bitumen of grade VG-30 mixed at the rate of 5.50% by weight of total mix as per design mix including supply and mixing of filler (OPC cement) laid, rolled and compacted to required camber and gradient using full width mechanical sensor paver with string sensor and compacted with 8 to 12 tonne power vibratory road roller complete all as specified and as directed.

Material and labour for hot applied thermoplastic road marking paint inclusive type-I reflectorising glass beads as per table 800-3, 800-4 of MORT&H applied in uniform thickness of at least 2.5mm and spread uniformly with reflectorising glass beads type-II @ 250 gms per sqm with a road marking machine as per IRC-35, with traffic diversion arrangements if required complete as per MORT & H specification clause 803.4 complete all as specified and as directed.

Supply and fix solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4 V/ 0.3 Watt one NI-ed rechargeable battery (1.2 V/ 1600 MA) consisting of six super bright LED with 10,000 to 18,000 mcd completed as per manufacturers instructions complete all as specified and as directed.

Material and labour for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 sqm and depth exceeding 50mm deep and not exceeding 100mm complete all as specified and as directed.

Material and labour for 7.5 cm thick (compacted thickness) WBM, with granite, trap or besalt coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber complete all as specified and as directed.

Material and labour for preparing water bound macadam surfaces by brushing with wire brushes for removing caked mud, existing grass on roads, sweeping with brooms and finally fanning the cleaned surface with air compressor to remove all loose dust and dirt and applying evenly one priming/ tack coat with bituminous primer (VG-10) applied at the rate of 10 Kg per 10 Sqm heated on requisite temperature by using mechanical sprayer complete all as specified and as directed.

Supply and fixing of cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of Model No DA 972.0 fixed with and including mild steel stud of suitable size as per manufacturers instructions complete all as specified and as directed.

M/s ESS KAY Construction (BID ID -3147532)

DMA PROJECTS (BID ID -3141887)

ARTI CONSTRUCTION (BID ID -3148439)

Shree Builders (BID ID -3148471)

divyarsh entrprise (BID ID -3147720)

ALBA AC AND REF SERVICES (BID ID -3148735)