DCC-Accounts-Renovation work to the office of Dental College Kozhikode.- Work-General Civil work

Amount

repair works

OD199921/2023-2024:Providing and fixing cubicle partition with staff table made with 19 mm thick marine plywood of IS 710 , Cubicle partition frame work of 19mm marine plywood making in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) fixing with 4 mm thick Teak Veneer, fixing on floors with necessary screws finishing, using synthetic adhesives, top of cabin is fixed with 8 mm thick toughened clear float glass with polished edges over partition. Staff table made with 19 mm thick marine plywood fixing with 4 mm thick Teak Veneer using synthetic adhesives including drawers, cupboards, keyboard tray with heavy duty telescope sliding channel of approved make, group lock / S.S. handle. Top of table is fixed with 8 mm thick toughened clear float glass with polished edges. Veneer to be provided only on visible surface, all the surface without veneer shall be polished/painting etc, including all other fittings all cost of materials all labour charges etc complete (measurement taken top of the table surface only).

OD199980/2023-2024:Providing and fixing partition wall with 19mm thick marine ply wood of approved brand with ply wood frame work making grid of 60cm intervals vertically and horizontally , fixing on floors with necessary screws, adhesive finishing the whole area by fixing 4 mm thick veneers using synthetic adhesive including all cost and conveyance complete. as per specification & the direction of engineer in charge. Note Measurement taken facing surface only

OD199982/2023-2024:Melamine polishing on wood work ( two coat)

OD200074/2023-2024:Supplying and fixing electro plated aluminium framed shelves, vertical members using aluminium alloy extrusion and covering with 3mm ACP sheet, back side with hylem sheet, L cleats, rubber beading , steel screws, including cost and conveyance of all materials to site and all labour cherges, fabrication charges etc complete as directed by departmental officers at site. Note - Measurement taken shutter facing surface only

15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

9.5.1.1:Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge. Second class teak wood35 mm thick shutters

9.7.1:Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Second class teak wood

9.53:Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

9.97.1:Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm

21.1.1.3:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPolyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron )

21.1.2.3:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn)

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

OD200400/2023-2024:Supplying and Fixing Frosted sticker over plain glass including all costs and labour charges etc completly

Santhosh Kumar K.V.

LANEESH .P

JASIR CA

Bidder Name

Santhosh Kumar K.V.

JASIR CA

LANEESH .P

SUBESH S