RENOVATION OF MT BUILDING AT CFEES, PROVISION OF FALSE CEILING IN 5TH FLOOR OF TECH BLOCK OF DIPR, SPECIAL REPAIR/REPLACEMENT OF OLD RUSTED IRON GATES (03 NOS) WITH NEW IRON, CATTLE DRAIN COVER AND PCC FLOORING AT JCB BUILDING AT METCALFE HOUSE AND P

Amount

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing) removing the rubbish out side MOD land in low laying area complete all as specifed and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground floors) complete all as specifed and as directed.

M&L plain cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) 25 mm thickness as sub base complete all as specifed and as directed.

M&L Vitrified lightshade tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 15mm thick screed bed or bedding layer in CM (1:6) complete all as specifed and as directed.

M&L Rendering 10 mm thick on new brick work in cement mortar 1:4 and finished even and fair without using extra cement complete all as specifed and as directed.

M&L for machine cut kota stone slab (table rubbed & polished) as in looring 18-20 mm thick over 20mm thick cement screed bed 1:6 CM laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing grinding and mirror polishing complete all as specifed and as directed.

S&F anti skid ceramic coloured vitrified tiles 7 to 8 mm thick (square/rectangular) area of each tile not exceeding 0.36 Sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 15mm thick screed bed or bedding layer in CM (1:6) complete all as specifed and as directed.

M&L for glazed ceramic coloured designer tiles (square/ rectangular) 7 mm thick not exceeding 0.16 Sqm as in dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 15 mm thick in CM 1:4 complete all as specifed and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key scrubing down with water including removing lout side MOD land in low laying area complete all as specifed and as directed.

M&L for rendering 15 mm thick on old brick work in cement mortar 1:6 and finished even and fair without using extra cement and applying two coats of oil bound distemper over a coat of primer over two coat of wall care putty and including preparing of newly prepared plaster surface complete all as specifed and as directed.

M&L for rendering 5 mm thick plaster on ceiling in cement mortar 1:3 and finished even and fair without using extra cement and applying two coat of oil bond distemper complete all as specifed and as directed.

M&L Rendering 15 mm thick on old brick work in cement mortar 1:4 and finished even and fair and two coats of exterior acrylic emulsion (weather & dust poof) in including over one coat of paint primer including two coat of wall care putty (1.00mm minium thickness of each coat) complete existing treatment complete all as specifed and as directed.

Dismantling wall panelling and ceiling boards with existing ceiling frame work (fibre pulp, insulation etc) or insulation boards/ slabs/ blankets any thikness incl cover fillets.

M&L for GI powder coated micro perforated micro look false ceiling with fleece lay in type minium 0.5mm thick, including provision of GI powder coated grid odule of 600mmx600mm size complete with GI powder coated grid consisting main runner suspended at 1200mm centre to centre and cross runner T section suspended of 600mm centre to centre supported by 4mm GI rod from ceiling surface including steel fastener and GI powder coated wall T angle sample of gird material and ceiling tiles alongwith fixing plan shall be got approved from the Accepting officer before procurement of the material. Make :- Armstrong/Hunter Douglas.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 Sqm but not exc 4.00 Sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutters from frame) or of any descriptions with shutters area not exc 1.50 Sqm each complete all as specified and directed.

S&F 12 mm thick particle board exterior grade with decorative prelaminated both sides of approved shade/coloured fixed to aluminium shutter/partitions including aluminium bedding rubber beading etc complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality and fixing by means of glazing pins and rubber beading etc in aluminium partitions etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for as in pillar, roof slab, Manhole/Septic tank/Soakage well cover slab, Chajja, shelves, lintel band etc complete all as specified and as directed.

M&L RCC M-25 (Nominal mix) type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in slabs supported on walls pillar/roof/chajjas etc complete all as specified and directed. Note:- Renforcement shall be measured and paid separately.

M&L TMT bars 10mm dia and over cut to length bent to shape required incl cranking, bending, spirally for columns hooking ends binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing.

S&F factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2 mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F pressed steel frames for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed.

S&F flush shutters solid core construction 35 mm thick , with block board core and both sides covered with decorative face veneer with lipping/frame to match complete all as specified and as directed

S&F 125 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed

S&F for 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F 125mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed

S&F 150 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

S&F in repair 15 mm bore GI tube , medium grade ,with all fittings, fixed complete to wall or laid in floors complete all as specified and as directed. .

All as per ser item No. 32.00 here-in-before but 20 mm bore.

All as per ser item No. 32.00 here-in-before but 25 mm bore.

Cutting existing steel tubing of 20mm bore for alterations or additions (Each cut measured ) screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) all as specified and directed.

All as per ser item No. 35.00 here-in-before but 25mm bore.

S&F rotational mouldedpolyethylene water storage tank of 1000Lts capacity (cylindrical) vertical with (closed top) hoisted and fixed in position complete all as specified and directed.

All as per ser item No. 37.00 here-in-before but fixed in repair.

S&F in repair Gun-metal gate valves, with iron wheel head, screwed both ends for GI pipe 20 mm bore and fixed complete all as specified and directed.

S&F in repairs vitreous China wash basin, white flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs vitreous china was down water closet pan (pedestal pettern), white or colored (excluding fixing bolts, flushing cistern and flush pipe but including connection to drain or outgoing pipe and to flushing pipe) complete all as specified and as directed.

S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair 10 ltrs capacity (PVC), valve less, ymphonic action type, flushing cistern, low level, colour in white, with inlet, ball valve, float and handle including brackets & connection to piles complete all as specified and as directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type , 60cm long between flanges, fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

M&L for 75 mm bore Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm long etc. complete all as specified and directed.

S&F in repairs 15mm bore brass chromium plated bib taps fancy half turn type with way flange screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. Make ISI Mark

S&F in repairs 15mm bore brass chromium plated pillars taps fancy half turn type with way flange screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. Make:ISI Mark

S&F in repair brass chromium plated toilet paper with flap recessed type holder. Make - ISI MARK

S&F in repair stop valves/angle valve half turn , brass, chromium plated, fancy type, with long shank and cup (concealed type), high pressure, screwed both ends for iron pipe or for unions, 15 mm bore complete all as specified and directed.

S&F in repair 100mm bore cast iron spun pipes, soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors.

All as per ser item No 53.00 here-in-before but 75 mm.

S&F CI 75 mm bore bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F CI 100mm bore bends (any radius), diminishing pieces or tapers (larger bore measured).

S&F CI 75 mm bore traps 'P' or 'S' complete all as specified and directed.

S&F CI 100 mm bore traps 'P' or 'S' complete all as specified and directed.

S&F in repairs 140mm floor door stoppers of aluminium alloy body and tounge, anodised with hard drawn steel springs, fixed in floors complete all as specified and directed.

Removing excavated materials to a distance exc 1.50 KM and n.exc 5.0 KM depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and as directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L for at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litr hole by drilling 6mm dia hole at a down ward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

Complete removal of existing roof treatment including brick tile, mud fusca upto depth of original roof slab, plastering and material and labour for applying water proofing treatment as under:- (a) M&L average 10mm thick rendering in CM 1:3 mixed with WPC compound @ 3% by wright of cement. (b) Apply one coat of cold bituminous primer @ 0.40 ltrs/Sqm on prepared plastered surfaces. (c) Laying APP polymer modified membrane 3mm thick and not less than 3.5 kg/sqm with side end taps by touch application method as specified. (d) Applying a coat of solar reflective bituminous aluminium pait @ 0.20 specified and directed.

M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) to maintain roof slope.

M&L for gunniting to RCC wall and roof etc by removing loose conc or plaster , cleaning surface, applying epoxy paint 40-50 micron thick AMATEC, derusting reinforcement by grit blasting, epoxy based bonding agent on old conc surfaces with SIKADUR-32@ 2% by wt of poly create and providing guniting 30mm thick in patches in CM (1:2) at a min pressure 2.5 Kg/cm2 and making surface even and smooth by rendering 20mm thick in CM (1:4) over guniting complete all as specified and directed.

S&F tainless steel (grade 304) hollow round or square/rectangular pipe of any dia/size fixed as in posts/railing with knock-down fixing system & top mounted round baluster made of 38 to 50 mm dia stainless steel 304 grade, channels, plates etc including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size on the top of the floor or the side of waist slab charge and make good complete all as specified and directed.

All as per ser item No. 66.00 here-in-before but S&F in repair.

S&F powder coated aluminum frame (minimum thickness of powder coating (minimum thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and directed.

S&F Anodised aluminium door shutters (minimum thickness of powder coating not less than 50 micron) aluminium minimum section weight 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

S&F powder coated, any colour, aluminium window and ventilator shutters, (minimum thickness of powder coating not less than 50 micron), fixed type without sash bars, aluminium minimum section weighing 0.55 Kg/Sqm including necessary jointing cleats, glazing clips, rubber packing , anodised aluminium snap beading, screws complete all as specified and as directed.

S&F aluminium powder coated grill 6 x 4.5 mm thick section 10cm centre to centre spacing complete with U-channel alround fixed in window with screws complete all as specified and directed

S&F powder coated, any colour, aluminium window and ventilator shutters, (minimum thickness of powder coating not less than 50 micron), side hung type without sash bars, aluminium minimum section weighing 0.55 Kg/Sqm including necessary jointing cleats, glazing clips, rubber packing , anodised aluminium fittings such as peg stays 150 mm long (01 No), hinges type B-21, 100 mm long (02 Nos) suitable handle (01 No) complete all as specified and directed.

M&L granite ( of any type ) stone slabs 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone (using single piece)laid over 20mm thick cement screed in CM 1:6 bedding including cuttings and polishing complete all as specified and directed.

M&L for moulding or rounding, cutting and smooth finishing on edges of Granite tiles etc complete all as specified and directed.

M&L kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 15 mm thick cement plaster 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing grinding & polishing like mirror complete all as specified and directed.

S&F in repair rolling shutters thickness laths in 1.25mm, without ball bearing, as specified including top cover, anchoring rod, hasp abd staple and one shop coat primer, erected in postion as indicated and of applying two coat of synthetic enamel paint over a coat red oxide primer.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

M&L for steel framed work such as grills, gratings, etc and similar work with angle or other sections complete all as specified steel conforming to grade Fe-410-o of Fe310-0.

S&F Fe 410 (Gde E-250) quality 'B' framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completent complete all as specified and as directed.

S&F MS plain black sheet 1.60 mm thick in hearths covering to doors shutters, chullah hood etc with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles etc. as required complete all as specified and as directed.

M&L preparing new steel surfaces of any description width or girth exc 10cm and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 complete all as specified and directed.

Dismentling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar etc all as specified and directed.

M&L for 18 to 20mm thick granite stone slab as in shelves ,window cill, in floor etc machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixtur of pigment to match the shade of granite stone including grinding, moulding and mirror polishing laid over 10 mm thick sereed bed in CM (1:6) complete all as specified and directed.

All as per ser item No. 84.00 above but in verticle potion in CM 1:3.

Demolition of brick work built in cement mortar of any description complete all as specified and as directed.

M&L for brick work with sub class fly ash B brick, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M&L for Brickwork with sub class fly ash `B' bricks old size straight or curved on plan exc 6m mean radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L for pre-polished coloured chequred cement concrete tiles 30cm X 30cm X 20-25mm thick, with white cement and pigments, set, jointed and pointed in neat cement slurry in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L PCC 1:2:4 type B-1 as in bounding of edges of interlocking tiles and the like including watering & lightly rounded or chamfered angles and throating complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded mechanically crushed stone aggregate as in filling in mass concrete in foundation and sub base of floor complete all as specified anddirected.

M&L providing pavement quality concrete (PQC) RMC of flexural stength 40 kilogram per sq.cm in field using 410 kg of cement per cubic metre, ( with maximum size of coarse aggregate upto 40mm) as per mix design, as in path /floors/ pavement in bays and compacted with using vaccume dewatering plant, floating operation with power floater, finishing the top surface of concrete even and smooth with power trowel including necessary formwork to sides and edges of concrete complete all specifed and as directed.

M&L for finishing of concrete roads/paving by brooming complete etc complete all as specified and directed.

M&L for forming construction (Dummy) joint 65 mm deep 10 mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

S&F in repair 4.80 to 5.00 mm thick sheet glass coloured tint as desired by GE and glazing with oil putty in square n-exc 0.50 sqm in each pane etc complete all as specified and directed. Note :(a). The glass shall be fixed a height upto 5.00 mtr in porch of JCB bldg with area of each glass panes upto 3.00 sqm (b) Necessary scaffolding and tools and plants including in quoted rate.

Excavation in hard/dense csil in post holes (or similar holes) each n exc 0.5 cum, getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing excavated material to low laying area from MoD land complete all as specified and directed.

M&L cement concrete type C2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass-concrete in walls or retaining walls, any thickness, size or shape including plasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

S&F plates/MS black sheets (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F steel work in tubular trusses medium graded including special shaped washer etc. (post height approximate 4m to 5m) complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of a colour having tensile strength of 550 Mpa as in roof covering/cladding including ridge to wall fixed with self tapping screws complete all as specified and directed.

M&L cement concrete type B2 1:4:8 (40 mm graded aggregate) 150 mm thick as in flooring sub base or top surface complete all as specified and directed.

Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, grade ‘A’ thickness of concrete 100 mm to 150 mm complete all as specified and directed.

M&L for cutting stone, concrete wall (RCC), etc chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking down carefully point wiring copper/aluminium (light, fan, socket, and power) complete (fittings such as switches ceiling roses, pendent regulators sockets etc complete removing material and taken as credit and making good the disturbed surface of wall, floor etc. complete all as specified and as directed.

M&L for point wring for one light/ceiling fan controlled by one switch with 1.5 sqmm nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLS in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including suitable new steel sunken boxes, modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLS connected to common earth duly complete including cutting, chasing the surface and then making good the same in CM 1:6 complete all as specified and directed.

All as per item No 106.00 above but socket 6 Amp modular type on same board.

All as per item No 106.00 above but for one socket point out let 5 Amp in independent board.

All as per item No 106.00 above but for one socket point out let 3 pin 16 Amp with 2.5 Sqmm PVC copper conductor and 2.5 Sqmm PVC insulated multi stranded FRLS copper conductor cable as earth continuity conductor for power point.

S&F modular switch modular type 5 pin 6 Amps 230V AC complete one way complete all as specified and directed.

S&F one switch and one socket modular type 5 PIN 6 Amp 230 Volts AC complete all as specified and directed.

S&F one switch and one socket modular type 5 PIN 16 Amp 230 Volts AC complete.

S&F regulator for ceiling fan modular electronic step type 120 Watt - 2 module suitable for 1200/1400mm ceiling fan complete.

S&F ceiling rose surface type bakelite 65x50mm two to three terminal 230V PVC polycarbonate complete all as directed.

S&F RJ 11 telephone socket jack With shutter.

S&F lamp angle holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all specified and directed.

S&F LED Retrofit lamp 12 watt.

Taking down of existing Ceiling/ Exhaust fan of any size and refixing the same after repairs of the ceiling/ Exhaust fan, applying one coat of sprey painting, bearing, applying one coat of sprey painting, printing of MES No. and testing the serviceability of the fan complete all as specified and directed.

S&F in repir of sheet metal enclosure, single pole and neutral with two pin and earth plug and socket complete with one single pole MCB SP 20Amps, 10 KA, C Curve complete all as specified and directed.

S&F in repair wiring for submain wiring along with earth wire with the 2x4.OO sqmm+ 1X 4 sq mm earth wire of FRLS PVC insulated multi stranded copper conductor cable and including conduit pipe 25 mm external dia medium grade including all accessories complete all as required or all as specified and as directed.

S&F in repair of LED tube light along with fixture 4 feet, 20 Watt and making all electric Each connections with two core PVC insulated, PVC sheathed copper conductor flexible cable 1.5 sqmm including taking down old unserviceable light fitting etc complete all as specified and directed. Make: C&S Cat Part No. LT4F20WLEDT8/WDI or equivalent of bajaj/ Philips.

S&F in repair LED luminaire, 2x2,36 W recess mounted pressure die cast aluminium luminaire in powder coated white finish with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver. Make C&S Cat Part No. LTCRP36WLED2X2 or equivalent of bajaj/ Philips.

S&F in repair LED flood light fitting with pressure die cast aluminium housing , complete with all accessories of 60W of 6500K. Make: Model No FL050 OF WIPRO or equivalent in Havells / Philips.

S&F in repair LED security light fitting powder coated pressure die cast aluminium SMD LED street light with hear resistance toughened glass of 30W for building security light. Make: Cat Part No LTESS30WLED/LS of C&S or equivalent in Bajaj/ Philips.

S&F in repair of MCB distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, TPN 8 way. 415 volts with bus bar rating 200 Amps, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCCB, including grouting in the wall, cutting & chasing etc complete all as specified. Make- L&T Cat No DBPGL008DD or equivalent approved make.

S&F in repair of sheet metal enclosure double door SPN 8 way with 240 V rated bus bar complete all as specified and directed.

S&F in repair MCB SPN 40 Amp 10 KA C' series complete all as specified and directed.

S&F in repair MCB 6 Amp to 32 Amp SP 10 KA C' series complete all as specified and directed.

S&F in repair MCCB four pole 415 volts 50 Hz , 250 amps, with rupturing capacity 25 KA in the existing panel complete all as specified and as directed.

All as per ser item No. 129.00 above but 100 Amps.

S&F in repair rigid non-metallic concealed PVC conduit of size 25mm dia inclusive of all tees, bends, elbow, reducers, bell mouth tube ends and fixing accessories such as couplers. locknuts, saddles, pipe hook etc over the surface/recess complete all as directed.

S&F GI bracket made of 40 mm bore medium grade GI pipe bend to shape approx 0.9 m length incl clamp nut, bolts etc complete for fixing of street light on wall/ building complete.

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earth strip 25x4mm connected to earth plate electrod by means of nuts bolts, check nut and washers of galvanised iron protected by 40 mm bore GI pipe (medium grade ) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x Cm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifting made out of 8 mm dia MS bar, funnel, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR Part-I, 1991 including test point, testing and commissioning complete.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4mm galvanised iron strip complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 m depth and getting out in soft/loose soil for laying UG cables of various sizes complete all as specified and directed.

Excavation in hard dense soil/PCC/Bituminous road and taking out soil n. exc 1.5 mtr wide and n. exc. 1.5mtr in depth and getting out for laying of cable complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm in any type of soil complete all as specified and directed.

Removing surplus excavated materials to a distance n. exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Supply and lay in trenches burnt brick sub class 'B' standard size for cable protection keeping width of the brick parallel to the length of the cable all as specified and directed.

Supply and spread clean dry river sand in trenches including leveling, punning for cushioning of cables all as specified. Note:Punned thickness of sand cushioning shall be measured.

Supply and laying XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (Heavy duty) with aluminium conductor, 1100 Volts, grade cross sectional area 70 Sqmm 3.5 core.

All as per item No. 141.00 above but 35 sqmm.

Taking down the existing heat/smoke detector and keep in safe custody and refixing the same in new position after fixing of false ceiling complete all as specified and directed.

M&L for rewinding of ceiling/exhaust fan with copper enameled wiring, greasing, replacement of bearing, gun metal Bush, capacitor complete all as specified and directed.

M&L for point wring for one light/ceiling fan controlled by one switch with 1.5 sqmm nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLS in and including PVC casing caping 20 mm dia medium duty ISI marked on wall/ply complete including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FRLS connected to common earth duly complete all as specified and directed.

All as per item No 146.00 above but 4 sqmm FRLS wire and earth wire of 4 Sqmm for 3 pin 16 A socket outlet.

S&F switch piano flush type single pole one way. 5 amps 240 volts complete all as specified and directed.

S&F in repair ceiling rose, 3 phase/PVC/Polycarbonate, Isolated body complete all as specified and directed.

S&F Switch socket combination 5 Amps/16 Amps, 5 in 1, 240 volts complete all as specified and directed.

S&F PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

-BLANK-

S&F of MCB distribution board double door Horizontal type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, TPN 4 way. 415 volts with bus bar rating 200 Amps, including grouting in the wall, cutting & chasing etc complete all as specified and directed.

All as per ser item No. 153.00 above but SPN 4 way 240 volts.

Supply and fix /connect Triple pole and nuetral encosure 3 pin Earth Plug and socket compete with one MCB TPN 32 Amps complete all as specified and directed.

M&L in repair wiring for circuit/submain wiring along with earth wire with the 4x4 sqmm+2X4 sq mm earth wire of FR LS PVC insulated copper conductor single core cable in and including conduit pipe 25 mm external dia medium grade including all accessories complete all as required or all as specified and as directed.

S&F MCB TPN 63 Amps, 415 volts complete all as specified and directed.

S&F MCB TP 40 Amps, 415 volts complete all as specified and directed.

S&F MCB SPN 40 Amp 10 KA C' series complete all as specified.

S&F MCB SP 5 to 40 Amps, 240 volts all as specified and directed.

Supply and laying XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (Heavy duty) with aluminium conductor, 1100 Volts, grade cross scetional area 16 Sqmm 4 core complete all as specified and directed.

Supply and laying XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (Heavy duty) with aluminium conductor, 1100 Volts, grade cross scetional area 10 Sqmm 4 core complete all as specified and directed.

S&F rigid non- metallic PVC conduit of size 25mm dia inclusive of all tees, bends, elbow, reducers, bell mouth tube ends and fixing accessories such as couplers. locknuts, saddles, pipe hook etc over the surface/recess complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised earthwire 4mm dia by means of nuts bolts, check nut and washers of galvanised iron protected by 20 mm bore GI pipe (medium grade ) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x Cm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifting made out of 8 mm dia MS bar, funnle, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR Part-I, 1991.

M&L vitrified light shade tiles 9-10 mm thick (Sqare/rectangular) area of each tile not exceeding 0.36 Sqm, in skitting/vertical surfaces, set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

Flint India

DP COMPLEX

M/s Himgiri construction