Electrical Beautification work of vikas path from saras dairy to gobriya bawdi chauraha via gatotkacch circle kota

SITC of 3 Mtr MS HDGI light column pole made of 3 mm thick 150 x 150mm square pipe , V -grooved MIG welded by a certified welder with the E250 grade base plate 250x250x12mm thickness. A smooth surface finish with a corrosive-resistant matte/semi-gloss Black RAL9005 one layer of Zinc etch primer and 2 layers of PU paint to be processed. Complete Light column structure including base plate to be Hot dip Galvanization thickness of a minimum of 60 microns. Prewired with class I potted BIS IS 15885 part 2/sec 13 certified driver , built on surge 4KV, IP66 rated along with external 10KV surge protection. LM80 certified High efficiency >125 lm/W discreet LED mounted on MCPCBs and module mounted on Aluminum extrusion heatsink. Cable from the LED module to the control gear must be routed safely through the main pipe. Illuminating through 50W LED module, IP65 rated P.F > 0.95, CCT 3000-3500K. Centre Light model concealed with die casting Top & Bottom cover with clear PC single diffuser and silicone gasket. Laser design patterns must be covered internally with an opaque PC diffuser,diffuser made of PC with IP66 protection and IK07 impact resistance PC sheet . The diffuser housing shall not be fixed by riveting or adhesive bonding and shall be designed for easy removal from top for easy maintenance. Accessible hinged interlockable(to prevent service door theft) door pre-wired control panel unit have a BIS CM/L approved C-curve 6A SP MCB, 4-way stud terminal 32A rated suitable for 25sqmm cable for loop in loop out & earthing wired connection. M16x450mm J type foundation bolts with a suitable GI template to be provided along with light columns. Main structural Pipe to be laser cut design minimum 1000mm length with top 500mm section with opal plain diffuser, Middle section of 500mm laser cut design with theme based or Zig-Zag pattern in middle KDA logo laser cut as per attached GA drawing and approved from the competent authority.Make:- KLite,Philips,Bajaj,Orient,Havells etc and Make is to be approved by department incharge .Quality test report from NABL approved labs/ in house NABL approved labs including TPI reports will be submitted by contractor

Dismentalling of existing decorative pole with luminaire under jurisdiction area of KDA Kota with safely disconnecting wire and safe carriage to another site under jurisdiction area of KDA Kota and refix it to pre-existing foundation and rewiring of existing cable complete in all respect .

Supply , installation testing and commissioning of architecturally designed four arm pole with flower basket surface mounted with base plate and fitted on a pre formed foundation .Coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint ,pole is structurally sound, engineered to withstand adverse conditions.Pole section welded to base plate by certified welders using high end MIG welding processes die-cast .Built-in control box with cast aluminium service door and safety rope. The IP65 rated control gear tray is prewired with MCB, terminal connectors for loop-in loop-out arrangement as per architectural design requirement complete in all respect. The bottom pipe section above the die cast aluminium embelishment shall bear the laser engraved LOGO (as prescribed ) on a suitably shaped aluminium sheet .Pole Height -9000mm .Manufacturing of the pole should be customized for UIT kota by manufacturer. Test report/ certificate of manufacturer which are to be needed is to be submitted by contractor.((Make : K-lite/Philips/Bajaj/Lustre etc and make is to be approved by department.)

Supply , installation testing and commissioning of Architecturally designed decorative Lighting Pole of 8Mtr Mounting Height with artistically curved bracket suitable for mounting 1 no. of architectural luminaires.The Square base plate shall be of MS (grade E250) of size 300 mm x 300mm, 16mm thick with MS Pipe welded to it and facilitated with 4 elongated slots ) that shall be provided with suitable nuts and plain washers.The cable entry hole Ø70mm is provided at the centre of the baseplate The gravity die casted Aluminium bottom decorative base cover Ø 504 mm x 1295mm H, conforming to LM6 is precision fitted at the base.The Pole shall comprise of 3 Pipe sections made up of MS pipe Ø 139.7mm x 3.6mm thk, Middle section of MS pipe Ø 114.3mm x 3.2mm thk and provided with a Die cast aluminium embelishment of size Ø 169mm x 90mm at the coupled point.The Top section (MS Pipe Ø 88.9mm x 2.9mm thk) of Height 1520mm welded on top, covered with die cast aluminium embelishment, holds the Congo Bracket made out of MS Pipe Ø 60.3mm x 2.6mm thk. The bracket structure shall be designed at 10 degree boom angle to mount the architectural street light luminaires at 1200mm Length from the centre. The complete 3 sections that are V-groove MIG welded and aesthetically tapered with Cast Aluminium Embelishments shall constitute the Pole Height of 8M from the base upto the Mounting of Luminiare. The Bottom pipe section above the die cast aluminium embelishment shall bear the laser engraved LOGO (as prescribed) on a suitably shaped Aluminium sheet.A base compartment with a die cast door contoured to the poles's shape housing the gear tray, prewired with MCB, terminal connectors for LILO arrangement and equipped with safety rope.t.Height : 8000mm as per architectural design requirement .Manufacturing of the pole should be customized for UIT kota by manufacturer (Make : K-lite/Philips/ Bajaj/Lustre etc and make is to be approved by department) 8 Mtr.Single arm decorative Pole

SITC of modern heritage post top luminaire(all designs to be approved by department) with 2 modules of 50W LED each, polycarbonate diffuser clear, Dimension A9 : Ø634 x 618 mm, A11 : Ø634 x 412 mm, A12 : Ø634 x 610 mm upgraded with high performance light engines. Aesthetically designed sturdy construction ensures a long life against all weather conditions,maintaining initial performances through the lifetime of the installation. IK Rating – IK07 CRI rating - >70, Safety class I, in built surge protection of 6KVA, Protection class : IP65. Designed for highest efficiency in terms of more lumens at reduced wattages WW (2x6127lm), CW ( 2x6223lm), NW(2x5899lm) type II LED lens. Product offered asymmetrical light distribution. The luminaire comprises of die cast aluminium top cover with Non yellowing, UV stabilised clear polycarbonate V diffuser and decorative supporting arms as per architectural design requirement Finished with pure polyester powder coated black finish complete in all respect .Test report / certificates of manufacturer which are to be needed is to be submitted by contractor.(Make : K-lite/Philips/Bajaj/Lustre etc and make is to be approved by department) modern heritage post top luminaire2X50W LED

SITC of architecturally designed pole (all designs to be approved by department) of Height 6 mtr with flower basket .Bracket with two arm . Pole Thickness approx- 3.2 / 2.9 / 2.6/ 2mm thickness, is designed for street lighting, suitable for various pendant type street light luminaires.This architecturally designed pole is structurally sound. Pole design parameters vary depending on the type of bracket and loading factor. Pole sections are swaged and joint together using special v groove technique by certified welders using high end MIG welding processes Coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint Shot blasting using steel shots ( grade - S280 ) + grid ( grade GP-25) material. Ratio to be used - 2:1 ratio ( for ex: 2 tones of shots we have to add 1 ton grid ) Built-in control box with cast aluminium service door and safety rope. The control gear tray is prewired with MCB, terminal connectors for loop-in loop-out arrangement. CE - Conformity mark. Electrical Junction box 325 x 90 Base plate ?250 x 12thk, J Bolt with 4 nos. of M16 Nut 2 nos of Plain washer with 500mm depth. 4 Elongated holes to suit M16 bolts at CC 180, Cable entry hole Ø70. Wind speed consideration (m/Sec) 50m/sec IS 875 part 3:1987, Material for tubes Steet of Grade Yst 210 to IS 3601, Material for base plate Steet of Grade E250 to IS 2062:2011 complete in all respect . Manufacturing of the pole should be customized for UIT kota by manufacturer. Test report / certificates of manufacturer which are to be needed is to be submitted by contractor.(Make : K-lite /Philips/Bajaj /Lustre etc & make is to be approved by department as per architectural design.Enclosed drawing of pole only for just reference.) Pole Height 6 mtr with flower basket .Bracket with two arm

SITC of modern heritage post top luminaire 1*50W LED WW,CW,NW upgraded with high performance light engines. Aesthetically designed sturdy construction ensures a long life against all weather conditions,maintaining initial performances through the lifetime of the installation. IK Rating – IK07 CRI rating - >70, Safety class I, in built surge protection of 6KVA, Protection class : IP65. Designed for highest efficiency in terms of more lumens at reduced wattages WW,CW,NW type II LED lens. Product offered asymmetrical light distribution. The luminaire comprises of die cast aluminium top cover with decorative supporting arms as per architectural design requirement complete in all respect. Test report / certificates of manufacturer which are to be needed is to be submitted by contractor.(Make : K-lite/Philips/ Bajaj /Lustre etc and make is to be approved by department) modern heritage post top luminaire 1*50W LED

Supply and installation of spike of M.S. rod 20mm dia 3.0mtr. long for earthing of (tower/pole) drive into earth by mechanical means sturcture connection the spike with cross arm top hamper PCC pole, lattics tower to earth etc. complete as per technical specification of DISCOM.

10.0 Sq. mm