Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹4.1 L
Closing Date
7 Sept 2026, 2:30 pm3d left
Single Packet
Normal Tender
No
Not Applicable
Groupwise
Lowest to Highest
Please see item details
Not Applicable
150 days
Expenditure
General
M AND P 65
3 conditions · 2 needing a document upload
Supply: Bulk or full order will be placed on manufacturers or its authorized agents who are either registered with Railway for tendered item or who has successfully supplied (supply here interprets to supply, installation & commissioning being M&P item) tendered or similar item* to Zonal Railway /PU/CORE/PSU/Other Govt. Department or Public listed Company/private company/Trusts having annual turnover of Rs. 100 Cr & above (CA certified turnover certificate/audited balance sheets duly certified by the Chartered Accountant to be attached along with the bid) in last five financial year and current financial year up to date of tender opening. *Definition of similarity: "Electrical driven Air Compressors with same or higher configuration/capacities". Performance: The tenderer shall, in their offer, submit satisfactory performance certificate of at least 01 no. of such machine (which are counted for the purpose of supply above). The machine covered by these certificates must have worked satisfactorily for at least one year from the date of commissioning as on the original date of closing of tender. The certificate shall not be older than one year from the original date of closing of tender. The performance certificate issued after original date of closing of tender (in cases where tender closing date has been extended) are also acceptable however the machine must have completed one year of satisfactory working after date of commissioning as on original date of closing of tender. To this effect, the performance certificate submitted by the tenderer shall have been issued by the actual end user organization of the machine (officer level), with their clear signature and address therein, in whose premises the machine is installed and commissioned. ISO certification: The manufacturer shall have valid ISO 9001 certificate on the date of closing of Tender and a copy of same shall be submitted along with the bid. The air compressor shall be in the scope of ISO certificate.
1 . In case the tenderer is an agent of the manufacturer, they should clearly indicate the same and also enclose tender specific current authorization certificate from the manufacturer to this effect on the letter head of manufacturer and also mention the place where the equipment will be offered for pre inspection before dispatch. 2. All necessary information/supporting documents required for establishing performance eligibility criteria, as proof of past supply credentials shall be submitted by the bidder along with original offer itself and the onus to prove successful supply and commissioning in the stipulated time frame lies on the bidder. In case no information or incomplete information is furnished by the bidder or offers submitting credential orders unaccompanied with proof of supply, commissioning and installation, their offer will be liable to be ignored.
In case tenderers participate as an authorized agent, then the performance as required above shall be that of the Principal, authorizing the agent. It may so happen that the agent has credentials of past supply for a different Principal but this will not be considered as performance for placing bulk order in case of change of Principal.
42 conditions · 1 needing a document upload
Tenderer should mention in their offer: - 1. Name of manufacture withcomplete address. 2. Place of inspection be indicated with completeaddress, option for inspections at godowns/outstation/multiple places be strictly avoided, and preferably be permitted only at manufacturers place.
EMD and SD Condition: As per Clause 3 of Section-I & per Clause 12 of Section-II of NWR SBD appended with this tender.
All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law. In case the successfultenderer is not liable to be registered under CGST/IGST/UTGST/SGSTAct, The railway shall deduct the applicable GST from his/their bills underreverse charge mechanism (RCM) and deposit the same to the concerned tax authority.
1.Bidders have to quote rates of each of the mentioned items individually in PDF file such as concomitant accessories, any other concomitant accessories & spares, concomitant works, cost of power consumption etc (Whichever applicable ) and the quoted cost will be included for the purpose of inter-se ranking and commercial evaluation except for optional services/spares/consumable. 2. The price break up quoted by firm will be binding for the purpose of post contract management/entering into separate contract based on this contract.
Micro and Small Enterprises firms In order to avail themselves of benefits and preferential treatments, the MSEs must be registered with any of the following: - (a) UDYAM (UDYAM Registration Certificate). (b) Udyog Aadhar Memorandum (Note :- Terminal date for consideration of this certificate was till 30.06.2022 or as extended by Ministry of Micro, Small & Medium Enterprises from time to time. Thus this certificate (Udyog Aadhar Memorandum) can only be considered if the above terminal date is further extended beyond 30.06.2022).
Please enter the percentage of local content in the material being offered . Please enter 0 for fully imported items and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Installation, testing, commissioning and proving of machine on turnkey basis as per clause 12 of section V of specification appended with this tender.
For firms not seeking/eligible for earnest money exemption, earnest money as stipulated in the Notice for Invitation of Tenders (NIT) will have to be paid only online through Payment Gateway link. No other mode of payment for EMD is acceptable.
4 locations across Rajasthan · 16 Numbers total
Supply, Installation and commissioning of Rotary Screw Electrical Driven Air compressor - 500 CFM, 10 Kg/cm2 having as per attached specifications.
65265016~NWR
65265016
Open - Indigenous
Mixed (Goods/Service/AMC)
Rajasthan
₹0
₹4.1 L
7 Sept 2026
3 Aug 2026
12 items · 16 Numbers total
The scope of supply shall include Design, manufacture & supply of electrically driven rotary scr ew, microprocessor based stationary air compressor as per parameters in Schedule-I with air-cooled oil coole r, air-cooled after cooler and moisture separator/ dehumidifier along with automatic drainage trap as well as manual drainage trap on turnkey basis in compliance with Para 4.1.1 to 4.1.4 (if required). It includes all the concomitant accessories/ equipments as detailed in Para 4.2 of section IV of specification appended with ten der and other concomitant accessories/ equipment, which the manufacturer considers essential to make the machine fully operational, when installed and commissioned. It shall also include installation and commissio ning of related equipment, training of personnel in operation and maintenance of machine and supply of tec hnical documentation. For basic design features & general characteristics refer to Section V. The Preventive Maintenance of Electric Air Compressors as per clause 16 of Section-V shall be in the scope of supplier. ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/C&W/HSR, NWR | Rajasthan | 2.00 Numbers |
| Total | 2 Numbers | |
The power consumption cost for 4400 hrs. of operation (considering 2200 hrs./year i.e. for 2 y ears at full rated capacity as per clause 2.2 ]
Optional Accessories:- A Set of Optional Accessories also includes as per para 4.3 of Section IV of Specification appended with the tender. It shall also includes Spares with breakup of individual items as p er clause 5 and clause 13 of section V of specification appended with tender. It shall also include Consumabl es as per clause 6 of section V of specification appended with tender. Bidders are required to attach the pric e break up of these accessories individually in PDF file along with submitted bid. ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/C&W/HSR, NWR | Rajasthan | 2.00 Numbers |
| Total | 2 Numbers | |
The scope of supply shall include Design, manufacture & supply of electrically driven rotary scr ew, microprocessor based stationary air compressor as per parameters in Schedule-I with air-cooled oil coole r, air-cooled after cooler and moisture separator/ dehumidifier along with automatic drainage trap as well as manual drainage trap on turnkey basis in compliance with Para 4.1.1 to 4.1.4 (if required). It includes all the concomitant accessories/ equipments as detailed in Para 4.2 of section IV of specification appended with ten der and other concomitant accessories/ equipment, which the manufacturer considers essential to make the machine fully operational, when installed and commissioned. It shall also include installation and commissio ning of related equipment, training of personnel in operation and maintenance of machine and supply of tec hnical documentation. For basic design features & general characteristics refer to Section V. The Preventive Maintenance of Electric Air Compressors as per clause 16 of Section-V shall be in the scope of supplier. ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/(C&W)/LGH, NWR | Rajasthan | 2.00 Numbers |
| Total | 2 Numbers | |
The power consumption cost for 4400 hrs. of operation (considering 2200 hrs./year i.e. for 2 y ears at full rated capacity as per clause 2.2 ]
Optional Accessories:- A Set of Optional Accessories also includes as per para 4.3 of Section IV of Specification appended with the tender. It shall also includes Spares with breakup of individual items as p er clause 5 and clause 13 of section V of specification appended with tender. It shall also include Consumabl es as per clause 6 of section V of specification appended with tender. Bidders are required to attach the pric e break up of these accessories Optional Accessories:- A Set of Optional Accessories also includes as per par a 4.3 of Section IV of Specification appended with the tender. It shall also includes Spares with breakup of in dividual items as per clause 5 and clause 13 of section V of specification appended with tender. It shall also i nclude Consumables as per clause 6 of section V of specification appended with tender. Bidders are required to attach the price break up of these accessories individually in PDF file along with submitted bid. ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/(C&W)/LGH, NWR | Rajasthan | 2.00 Numbers |
| Total | 2 Numbers | |
The scope of supply shall include Design, manufacture & supply of electrically driven rotary scr ew, microprocessor based stationary air compressor as per parameters in Schedule-I with air-cooled oil coole r, air-cooled after cooler and moisture separator/ dehumidifier along with automatic drainage trap as well as manual drainage trap on turnkey basis in compliance with Para 4.1.1 to 4.1.4 (if required). It includes all the concomitant accessories/ equipments as detailed in Para 4.2 of section IV of specification appended with ten der and other concomitant accessories/ equipment, which the manufacturer considers essential to make the machine fully operational, when installed and commissioned. It shall also include installation and commissio ning of related equipment, training of personnel in operation and maintenance of machine and supply of tec hnical documentation. For basic design features & general characteristics refer to Section V. The Preventive Maintenance of Electric Air Compressors as per clause 16 of Section-V shall be in the scope of supplier. ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE(CARRIAGE) MADAR, NWR | Rajasthan | 2.00 Numbers |
| Total | 2 Numbers | |
The power consumption cost for 4400 hrs. of operation (considering 2200 hrs./year i.e. for 2 y ears at full rated capacity as per clause 2.2 ]
Optional Accessories:- A Set of Optional Accessories also includes as per para 4.3 of Section IV of Specification appended with the tender. It shall also includes Spares with breakup of individual items as p er clause 5 and clause 13 of section V of specification appended with tender. It shall also include Consumabl es as per clause 6 of section V of specification appended with tender. Bidders are required to attach the pric e break up of these accessories individually in PDF file along with submitted bid. ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE(CARRIAGE) MADAR, NWR | Rajasthan | 2.00 Numbers |
| Total | 2 Numbers | |
The scope of supply shall include Design, manufacture & supply of electrically driven rotary scr ew, microprocessor based stationary air compressor as per parameters in Schedule-I with air-cooled oil coole r, air-cooled after cooler and moisture separator/ dehumidifier along with automatic drainage trap as well as manual drainage trap on turnkey basis in compliance with Para 4.1.1 to 4.1.4 (if required). It includes all the concomitant accessories/ equipments as detailed in Para 4.2 of section IV of specification appended with ten der and other concomitant accessories/ equipment, which the manufacturer considers essential to make the machine fully operational, when installed and commissioned. It shall also include installation and commissio ning of related equipment, training of personnel in operation and maintenance of machine and supply of tec hnical documentation. For basic design features & general characteristics refer to Section V. The Preventive Maintenance of Electric Air Compressors as per clause 16 of Section-V shall be in the scope of supplier. ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/(C&W)/Suratgarh, NWR | Rajasthan | 2.00 Numbers |
| Total | 2 Numbers | |
The power consumption cost for 4400 hrs. of operation (considering 2200 hrs./year i.e. for 2 y ears at full rated capacity as per clause 2.2 ]
Optional Accessories:- A Set of Optional Accessories also includes as per para 4.3 of Section IV of Specification appended with the tender. It shall also includes Spares with breakup of individual items as p er clause 5 and clause 13 of section V of specification appended with tender. It shall also include Consumabl es as per clause 6 of section V of specification appended with tender. Bidders are required to attach the pric e break up of these accessories individually in PDF file along with submitted bid. ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/(C&W)/Suratgarh, NWR | Rajasthan | 2.00 Numbers |
| Total | 2 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5612491.pdf
ATTACHMENT
5858045.pdf
ATTACHMENT
5848904.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].