MPLADS

Scarifying existing granular surface to a depth of 50mm and disposal of scarified material with a lift of upto 3m and leads upto 1000m as per technical specification clause 301.4. MORD Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST and seignorage charges

Construction of granular sub-base by providing well graded material with Grading- III material (HBG M/C + Stone dust) CBR value not less than 20 and PI value less than 6 spreading in uniform layers with Tractor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD including cost of materials, labour, conveyance, hire charges of machinery, including Overheads & Contractors Profit @ 13.615% but excluding GST & Seigniorage charges etc. complete

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with Vibratory roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD/ MORTH, including overhead charges & Contractors profit @ 13.615% but excluding GST, seigniorage charges etc. complete for finished item of work.

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction joints, applying primer, sealant, debonding strips, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including overhead charges & Contractors profit @ 13.615% but excluding Seigniorage charges and GST etc. complete for road work

Construction of Shoulders with local selected material including cost and conveyance of all materials and labour charges etc. complete for finished item of work including contractors profit & Over head charges @ 13.615%, but excluding GST and seigniorage etc., complete.

Earth work in excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc. complete for finished item of work including overhead charges & Contractors profit @ 13.615% but excluding Seigniorage charges & GST

Sand filling in trenches, sides of foundations and basement with lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hiere charges of T&P etc. complete for finished item of work, including Overheads charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Providing Plain cement concrete M10 grade in open foundations using 40 mm nominal size Graded hard stone aggregate(HBG), mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specification Clauses 802, 803, 1202 and 1203 MORD and 1500, 1700 & 2100 MORTH including overhead charges & Contractors profit @ 13.615% but excluding Seigniorage charges & GST etc. complete for levelling course.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH,including contractors profit & Over head charges @ 13.615%, but excluding GST and seigniorage etc., complete

Providing and laying reinforced cement concrete M25 grade (Design Mix) using 20 & 10mm metal (HBG) mechanically mixed in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 MORD / Sections 1500, 1600 & 1700 MORTH, including contractors profit & Over head charges @ 13.615% but excluding GST and Seigniorage charges etc. complete upto 5 to 10m height. - For Super Structure (Deck slab)

Construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibrated roller 80-100 kN to meet requirement of table 300.1 and 300.2 with a lead upto 1000m as per technical specification clause 301.50 / 305 MORTH including overhead charges & Contractors profit @ 13.615% but excluding GST and Seigniorage charges.

Supplying, fitting, and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications Clauses 1002 and 1010 MORD & 1202 MORD/ 1600 MORTH, for Bars below 36 mm dia including over laps and wastage, where they are not welded, including overhead charges & contractors profit @ 13.615%, but excluding GST etc. complete