Providing Electrical works to newly allotted space for Centre of Excellence in Advanced Manufacturing at KV school building

Amount

WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

Group C

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, Plastic/GI box in surface/recess etc. as required.

Plastic surface box - 4 module

Plastic surface box - 6 module

Plastic surface box - 8 module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

4 Module

6 Module

8 Module

DLP plasticTrunking wiring (Make: Legrand/MK)

DLP Pastic Trunking 105x50mm and accessories Flexible cover 85mm -1No, Joints for cover 85mm width-1No,Basejoint-25Nos,Clips-15Nos,Separation partition-1No,Endcap-2No,Internal angles-adjustable from 80 degr - 120 deg - 1No, VDI accessories for internal angles-1No,VDI accessories for external angles -1No, Flat angles -1No, VDI accessories for flat angles-1No, Flat junctions-1No, Flat junctions for specific size-tap off to an 80mm wide branch -1No, VDI accessories for juctions -1No, Wall crossing -1No, Capacity change -1No,Capacity change-1No, partition junction -1No, Cable ties base -1No. (Make: Legrand/MK)

DLP Pastic mini Trunking system 32x12.5mm and accessories Endcap-1No,Internal angles-adjustable from 85 degr - 95 deg - 1No,Flat junctions -1No.(Make: Legrand)

DLP Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed as required.(Make: Finolex/Polycab/RR)

2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire

4 X 6.0 sq. mm + 2 X 6.0 sq. mm earth wire

MCCB, MCB & DB'S

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 200 A, 36kA, FPMCCB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following rating,Three/four pole,415 volts,Isolator/MCB in the existing MCB/DB complete with connections,testing and commissioning erc.as required.

Triple Pole 40-63A MCB

Four Pole 40-63A MCB

Supplying and fixing FP sheet steel enclosure on surface/ recess along with following amps 415 volts "C" curve FP MCB complete with connections, testing and commissioning etc. as required. 2-4 Pole Enclosure only

Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 160-250 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, with provision of 160 amps TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB's/ MCCB) as required .(Note : Vertical type MCCB TPDB is normally used where 3 phase outlets are required.) (Make: Legrand/Siemens) 12 way, 250A, Double door

Supplying and fixing of following amps, 230/415volts, SPN/TPN industrial type, socket outlet, with 2/4pole and earth, metal enclosed plug top along with following amps "C" curve, DP/FP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. (Make: Legrand - Tempra or Equivalent)

6-32A 2P+E - DP industrial socket

6-32A 3P+N+E - FP industrial socket

EARTHING

Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm)

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying and fixing cosmos earthig electrode systems. Cosmos Roma 40mm Dia 3 Mtrs Length with moisture Enhancer 25kg.

MV CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required. (1 or 6per Circuit)

Upto 35 sq. mm

MV CABLE JOINTING & END TERMINATION Supplying and making indoor end termination with copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.

1X6 Sq.mm

1X16 Sq.mm

1X25Sq.mm

1X35Sq.mm

SUPPLY OF ELECTRICAL ITEMS

Supplying and fixing extra conduit down rod Supplying and fixing of tube light fitting hook & chain including chipping,fixing & surfacing to make good condition.

Supplying and fixing of wall mounting fan of following 450mm sweep , suitable for operation on 230 Volts, single phase, 50 Hz, AC Supply including wall braket rod and resistance type regulator as required. Wall mouting fan (Medium type)

Repairing and painting works.

Removing of Tube light fittings & Fans with necessary arrangents etc. as req.

Labour charges for fixing of three pole and neutral, sheet steel, MCB distribution board, 415V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, with necessary interconnections.

Labour charges for fixing DP sheet steel enclosure on surface/ recess with necessary connections, testing and commissioning etc. as required.

Labour charges for fixing of SP MCB in existing DB including connection, testing & commissioning etc. as req.

Supplying of Cables. Supplying and fixing of following size ISI marked PVC insulated and unsheathed copper single core conductor cable of 1.1 KV grade as required.(Make:Finolex,Gloster,Polycab and Havells with 18 months warranty from the date of supply)

1x16.0sq mm

1x25.0sq mm

1x35.0sq mm

Supply of Light Fixtures with Lamps Supply and fixing of indoor decorative LED fitting of high efficincy luminaire range suitable for recessed/surface mounting in moudular ceiling with 600 x 600/300X300/round type/down light module and extemely low hight of 50 mm. (Make: philips, Wipro, Crompton Greaves, Bajaj )

1x1 LED Cirrus Mini Pro SM200C LED15S 4000 PSU OD WH

2x2 rcess mounting LED BZRSQL 36W GZ

LAKSHMI ELECTRICAL WORKS

MANOJ ENTERPRISES

K C ELECTRICAL AND TRADING

Nagpur Industrial And Domestic Circuits

MVPOWER CONSULTANTS AND ENGINEERS PVT LTD

POWER ELECTRICAL WORKS