Material purchase for Construction of Anganwadi building

Amount

construction of anganwadi

Stone for masonry work

Through and bond stone size 24 x 24 x 39cm

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Coarse sand (zone III)

Portland Cement

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

wall form panel 1250x500 mm

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Second class kail wood in planks

Second class kail wood in scantling

Hollock ballies 125 mm diameter

Adjustable span ESO+SI (2.35-3.40)

Safeda ballies 125 mm diameter

Stone Aggregate(single size): 10 mm nominal size

Laterite stone of size 35x20x20cm

Twisted steel/deformed bars

Plasticizer / super plasticizer

Production cost of concrete by batch mix plant

Pumping charges of concrete including Hire charges of pump, piping work & accessories etc.

Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm

Fine sand (zone IV)

Multi surface paint

Special primer (C.W)

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Plastic emulsion paint

Synthetic enamel paint in black or chocolate shade

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc.

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Anjili wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Polyethylene water storage tank with cover and suitable locking arrangemnet

Vitreous China orrisa type w.c. pan size 580 mm

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

100 mm S.C.I. trap with vent heel

Vitreous china flat back wash basin 550x400 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Brass bib-cock-15 mm dia

PVC pipe 50 mm outer dia.6kgf/cm2

PVC pipe 110 mm outer dia 6kgf/cm2

PVC pipe 25 mm outer dia. 10kgf cm2

PVC pipe 32 mm outer dia. 10Kgf/cm2

PVC pipe 20 mm outer dia 10 kfg/cm2

Mild steel tubes hot finished welded type

Welding by electric plant

GI trafford profile sheet 0.35mm thick

Bitumen washer

Stainless steel screws 50 mm

Stone Aggregate(single size): 06 mm nominal size

Interlocking C.C. paver block (60 mm thick, M-30)

BEERANKUTTY K.

Bidder Name

BEERANKUTTY K.

N M SREEDHARAN